From: Lothar Rubusch <l.rubusch@gmail.com>
To: lars@metafoo.de, Michael.Hennerich@analog.com, jic23@kernel.org
Cc: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
eraretuya@gmail.com, l.rubusch@gmail.com
Subject: [PATCH v4 02/14] iio: accel: adxl345: move INT enable to regmap cache
Date: Thu, 13 Mar 2025 16:50:37 +0000 [thread overview]
Message-ID: <20250313165049.48305-3-l.rubusch@gmail.com> (raw)
In-Reply-To: <20250313165049.48305-1-l.rubusch@gmail.com>
Replace the interrupt enable member variable to the regmap cache. This
makes the function set_interrupts() obsolete. The interrupt enable
register is written when the driver is probed. Thus it is perfectly
cacheable.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
---
drivers/iio/accel/adxl345_core.c | 26 +++++++++++---------------
1 file changed, 11 insertions(+), 15 deletions(-)
diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c
index 6f337b26999a..10e2da7de17e 100644
--- a/drivers/iio/accel/adxl345_core.c
+++ b/drivers/iio/accel/adxl345_core.c
@@ -36,7 +36,6 @@ struct adxl345_state {
struct regmap *regmap;
bool fifo_delay; /* delay: delay is needed for SPI */
int irq;
- u8 int_map;
u8 watermark;
u8 fifo_mode;
__le16 fifo_buf[ADXL345_DIRS * ADXL345_FIFO_SIZE + 1] __aligned(IIO_DMA_MINALIGN);
@@ -114,11 +113,6 @@ static int adxl345_set_measure_en(struct adxl345_state *st, bool en)
return regmap_write(st->regmap, ADXL345_REG_POWER_CTL, val);
}
-static int adxl345_set_interrupts(struct adxl345_state *st)
-{
- return regmap_write(st->regmap, ADXL345_REG_INT_ENABLE, st->int_map);
-}
-
static int adxl345_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
@@ -217,7 +211,7 @@ static int adxl345_reg_access(struct iio_dev *indio_dev, unsigned int reg,
static int adxl345_set_watermark(struct iio_dev *indio_dev, unsigned int value)
{
struct adxl345_state *st = iio_priv(indio_dev);
- unsigned int fifo_mask = 0x1F;
+ const unsigned int fifo_mask = 0x1F, watermark_mask = 0x02;
int ret;
value = min(value, ADXL345_FIFO_SIZE - 1);
@@ -227,7 +221,10 @@ static int adxl345_set_watermark(struct iio_dev *indio_dev, unsigned int value)
return ret;
st->watermark = value;
- st->int_map |= ADXL345_INT_WATERMARK;
+ ret = regmap_update_bits(st->regmap, ADXL345_REG_INT_ENABLE, watermark_mask,
+ ADXL345_INT_WATERMARK);
+ if (ret)
+ return ret;
return 0;
}
@@ -381,11 +378,6 @@ static void adxl345_fifo_reset(struct adxl345_state *st)
static int adxl345_buffer_postenable(struct iio_dev *indio_dev)
{
struct adxl345_state *st = iio_priv(indio_dev);
- int ret;
-
- ret = adxl345_set_interrupts(st);
- if (ret < 0)
- return ret;
st->fifo_mode = ADXL345_FIFO_STREAM;
return adxl345_set_fifo(st);
@@ -401,8 +393,7 @@ static int adxl345_buffer_predisable(struct iio_dev *indio_dev)
if (ret < 0)
return ret;
- st->int_map = 0x00;
- return adxl345_set_interrupts(st);
+ return regmap_write(st->regmap, ADXL345_REG_INT_ENABLE, 0x00);
}
static const struct iio_buffer_setup_ops adxl345_buffer_ops = {
@@ -524,6 +515,11 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap,
indio_dev->num_channels = ARRAY_SIZE(adxl345_channels);
indio_dev->available_scan_masks = adxl345_scan_masks;
+ /* Reset interrupts at start up */
+ ret = regmap_write(st->regmap, ADXL345_REG_INT_ENABLE, 0x00);
+ if (ret)
+ return ret;
+
if (setup) {
/* Perform optional initial bus specific configuration */
ret = setup(dev, st->regmap);
--
2.39.5
next prev parent reply other threads:[~2025-03-13 16:51 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-13 16:50 [PATCH v4 00/14] iio: accel: adxl345: add interrupt based sensor events Lothar Rubusch
2025-03-13 16:50 ` [PATCH v4 01/14] iio: accel: adxl345: use regmap cache for INT mapping Lothar Rubusch
2025-03-16 11:06 ` Jonathan Cameron
2025-03-13 16:50 ` Lothar Rubusch [this message]
2025-03-16 11:11 ` [PATCH v4 02/14] iio: accel: adxl345: move INT enable to regmap cache Jonathan Cameron
2025-03-13 16:50 ` [PATCH v4 03/14] iio: accel: adxl345: cleanup regmap return values Lothar Rubusch
2025-03-16 11:12 ` Jonathan Cameron
2025-03-13 16:50 ` [PATCH v4 04/14] iio: accel: adxl345: introduce adxl345_push_event function Lothar Rubusch
2025-03-16 11:14 ` Jonathan Cameron
2025-03-16 19:58 ` Andy Shevchenko
2025-03-17 10:55 ` Jonathan Cameron
2025-03-17 15:51 ` Andy Shevchenko
2025-03-18 9:44 ` Lothar Rubusch
2025-03-26 9:32 ` Andy Shevchenko
2025-03-28 15:30 ` Lothar Rubusch
2025-03-13 16:50 ` [PATCH v4 05/14] iio: accel: adxl345: add single tap feature Lothar Rubusch
2025-03-16 11:22 ` Jonathan Cameron
2025-03-18 10:32 ` Lothar Rubusch
2025-03-18 23:08 ` Lothar Rubusch
2025-03-31 12:36 ` Jonathan Cameron
2025-03-13 16:50 ` [PATCH v4 06/14] iio: accel: adxl345: add double " Lothar Rubusch
2025-03-13 16:50 ` [PATCH v4 07/14] iio: accel: adxl345: set the tap suppress bit permanently Lothar Rubusch
2025-03-13 16:50 ` [PATCH v4 08/14] iio: accel: adxl345: add freefall feature Lothar Rubusch
2025-03-13 16:50 ` [PATCH v4 09/14] iio: accel: adxl345: extend sample frequency adjustments Lothar Rubusch
2025-03-16 11:26 ` Jonathan Cameron
2025-03-13 16:50 ` [PATCH v4 10/14] iio: accel: adxl345: add g-range configuration Lothar Rubusch
2025-03-16 11:28 ` Jonathan Cameron
2025-03-13 16:50 ` [PATCH v4 11/14] iio: accel: adxl345: add activity event feature Lothar Rubusch
2025-03-16 11:32 ` Jonathan Cameron
2025-03-13 16:50 ` [PATCH v4 12/14] iio: accel: adxl345: add inactivity feature Lothar Rubusch
2025-03-13 16:50 ` [PATCH v4 13/14] iio: accel: adxl345: add coupling detection for activity/inactivity Lothar Rubusch
2025-03-13 16:50 ` [PATCH v4 14/14] docs: iio: add documentation for adxl345 driver Lothar Rubusch
2025-03-16 11:37 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250313165049.48305-3-l.rubusch@gmail.com \
--to=l.rubusch@gmail.com \
--cc=Michael.Hennerich@analog.com \
--cc=eraretuya@gmail.com \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).