[PATCH v4 03/14] iio: accel: adxl345: cleanup regmap return values

[Lothar Rubusch <l.rubusch@gmail.com>]

Regmap return values sometimes are checked being less than zero
to trigger error handling. Sometimes this is checked for being not
zero. Unify the situation and check for not being zero.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
---
 drivers/iio/accel/adxl345_core.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c
index 10e2da7de17e..eec3f0e17e1e 100644
--- a/drivers/iio/accel/adxl345_core.c
+++ b/drivers/iio/accel/adxl345_core.c
@@ -133,7 +133,7 @@ static int adxl345_read_raw(struct iio_dev *indio_dev,
 		ret = regmap_bulk_read(st->regmap,
 				       ADXL345_REG_DATA_AXIS(chan->address),
 				       &accel, sizeof(accel));
-		if (ret < 0)
+		if (ret)
 			return ret;
 
 		*val = sign_extend32(le16_to_cpu(accel), 12);
@@ -145,7 +145,7 @@ static int adxl345_read_raw(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_CALIBBIAS:
 		ret = regmap_read(st->regmap,
 				  ADXL345_REG_OFS_AXIS(chan->address), &regval);
-		if (ret < 0)
+		if (ret)
 			return ret;
 		/*
 		 * 8-bit resolution at +/- 2g, that is 4x accel data scale
@@ -156,7 +156,7 @@ static int adxl345_read_raw(struct iio_dev *indio_dev,
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		ret = regmap_read(st->regmap, ADXL345_REG_BW_RATE, &regval);
-		if (ret < 0)
+		if (ret)
 			return ret;
 
 		samp_freq_nhz = ADXL345_BASE_RATE_NANO_HZ <<
@@ -270,7 +270,7 @@ static int adxl345_set_fifo(struct adxl345_state *st)
 
 	/* FIFO should only be configured while in standby mode */
 	ret = adxl345_set_measure_en(st, false);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	ret = regmap_read(st->regmap, ADXL345_REG_INT_MAP, &intio);
@@ -283,7 +283,7 @@ static int adxl345_set_fifo(struct adxl345_state *st)
 			   FIELD_PREP(ADXL345_FIFO_CTL_TRIGGER_MSK, intio) |
 			   FIELD_PREP(ADXL345_FIFO_CTL_MODE_MSK,
 				      st->fifo_mode));
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	return adxl345_set_measure_en(st, true);
@@ -304,7 +304,7 @@ static int adxl345_get_samples(struct adxl345_state *st)
 	int ret;
 
 	ret = regmap_read(st->regmap, ADXL345_REG_FIFO_STATUS, &regval);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	return FIELD_GET(ADXL345_REG_FIFO_STATUS_MSK, regval);
@@ -332,7 +332,7 @@ static int adxl345_fifo_transfer(struct adxl345_state *st, int samples)
 		/* read 3x 2 byte elements from base address into next fifo_buf position */
 		ret = regmap_bulk_read(st->regmap, ADXL345_REG_XYZ_BASE,
 				       st->fifo_buf + (i * count / 2), count);
-		if (ret < 0)
+		if (ret)
 			return ret;
 
 		/*
@@ -390,7 +390,7 @@ static int adxl345_buffer_predisable(struct iio_dev *indio_dev)
 
 	st->fifo_mode = ADXL345_FIFO_BYPASS;
 	ret = adxl345_set_fifo(st);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	return regmap_write(st->regmap, ADXL345_REG_INT_ENABLE, 0x00);
@@ -544,7 +544,7 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap,
 	}
 
 	ret = regmap_read(st->regmap, ADXL345_REG_DEVID, &regval);
-	if (ret < 0)
+	if (ret)
 		return dev_err_probe(dev, ret, "Error reading device ID\n");
 
 	if (regval != ADXL345_DEVID)
@@ -553,11 +553,11 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap,
 
 	/* Enable measurement mode */
 	ret = adxl345_set_measure_en(st, true);
-	if (ret < 0)
+	if (ret)
 		return dev_err_probe(dev, ret, "Failed to enable measurement mode\n");
 
 	ret = devm_add_action_or_reset(dev, adxl345_powerdown, st);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	st->irq = fwnode_irq_get_byname(dev_fwnode(dev), "INT1");
@@ -595,7 +595,7 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap,
 		ret = regmap_write(st->regmap, ADXL345_REG_FIFO_CTL,
 				   FIELD_PREP(ADXL345_FIFO_CTL_MODE_MSK,
 					      ADXL345_FIFO_BYPASS));
-		if (ret < 0)
+		if (ret)
 			return ret;
 	}
 
-- 
2.39.5