[PATCH v5 00/11] iio: accel: adxl345: add interrupt based sensor events

[Lothar Rubusch <l.rubusch@gmail.com>]

Add several interrupt based sensor detection events:
- single tap
- double tap
- free fall
- activity
- inactivity
- sample frequency
- full frequency g range approach
- documentation

All the needed parameters for each and methods of adjusting them, and
forward a resulting IIO event for each to the IIO channel.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
---
v4 -> v5:
- read_config_value() and write_config_value() now use direct returns,
  in case of a failure, measurement stays turned off
- fifo evaluation returns 0 in case of success
- axis enum turned into three different set of defines for tap, act and inact
- turn the suppress bit into a separate define macro
- variable naming, generally use axis_ctrl for similar variables

v3 -> v4:
- rename patch "add double tap suppress bit" to
  "set the tap suppress bit permanently" to make it more comprehensive
- added patch "cleanup regmap return values"
- added patch "introduce adxl345_push_event function", as a solution
  to the return value problem, group all int_stat evaluating pieces
  in the same function
- tap, act and inact axis enabling are using now regmap cache
- activity enable depending on individual axis now, as the sensor offers
  such feature
- inactivity enable depending on individual axis now, as the sensor offers
  such feature
- fix bug in previous patch: separate axis direction in interrupt handler
  sharing the same variable for tap and activity, if tap and activity
  enabled together
- refac of the direction identification of previous patch: only read
  act/tap axis once now in interrupt handler if both is enabled
- fix bug in previous patch: return value of pushed event in interrupt
  handler
- several cleanups

v2 -> v3:
- generally introduction of regmap cache for all directly stored 8-bit
  values, specification of volatile regs and cleanup
- moving thresholds, unchanged values and flags to regmap cache, in
  consequence removal of corresponding member values of the state
  instance
- removal of intio and int_map member fields due to regmap cache, thus
  split of set_interrupts() patches in two parts
- rework documentation
- rework of ac-bit comment

v1 -> v2:
- implementation of all events (but tap2 suppress bit) by means IIO ABI
- add sample frequency / ODR configuration
- add g ranges configuration
- add activity/inactivity using auto-sleep and powersave
- add dynamic adjustment of default values for
  activity/inactivity thresholds and time for inactivity based on ODR
  and g range (can be overwritten)
- add sensor documentation
Lothar Rubusch (11):
  iio: accel: adxl345: introduce adxl345_push_event function
  iio: accel: adxl345: add single tap feature
  iio: accel: adxl345: add double tap feature
  iio: accel: adxl345: set the tap suppress bit permanently
  iio: accel: adxl345: add freefall feature
  iio: accel: adxl345: extend sample frequency adjustments
  iio: accel: adxl345: add g-range configuration
  iio: accel: adxl345: add activity event feature
  iio: accel: adxl345: add inactivity feature
  iio: accel: adxl345: add coupling detection for activity/inactivity
  docs: iio: add documentation for adxl345 driver

 Documentation/iio/adxl345.rst    |  416 +++++++++
 drivers/iio/accel/adxl345.h      |    2 +-
 drivers/iio/accel/adxl345_core.c | 1387 +++++++++++++++++++++++++++++-
 3 files changed, 1760 insertions(+), 45 deletions(-)
 create mode 100644 Documentation/iio/adxl345.rst

-- 
2.39.5