Re: [PATCH v2 02/10] iio: adc: ad7606_spi: check error in ad7606B_sw_mode_config()

[Jonathan Cameron <jic23@kernel.org>]

On Tue, 18 Mar 2025 17:52:10 -0500
David Lechner <dlechner@baylibre.com> wrote:

> Add missing error check in ad7606B_sw_mode_config().
> 
> Reviewed-by: Nuno Sá <nuno.sa@analog.com>
> Signed-off-by: David Lechner <dlechner@baylibre.com>
Applied to the togreg branch of iio.git.
For now pushed out as testing. I'll rebase on rc1 before pushing
it out as a non rebasing branch.

Thanks,

Jonathan

> ---
>  drivers/iio/adc/ad7606_spi.c | 8 +++++---
>  1 file changed, 5 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/iio/adc/ad7606_spi.c b/drivers/iio/adc/ad7606_spi.c
> index 885bf0b68e7775c5f4a12dfb827f502d5f782e8c..c028e08efe2c82cd97249f98eec50a9a9c06471f 100644
> --- a/drivers/iio/adc/ad7606_spi.c
> +++ b/drivers/iio/adc/ad7606_spi.c
> @@ -174,11 +174,13 @@ static int ad7616_sw_mode_config(struct iio_dev *indio_dev)
>  static int ad7606B_sw_mode_config(struct iio_dev *indio_dev)
>  {
>  	struct ad7606_state *st = iio_priv(indio_dev);
> +	int ret;
>  
>  	/* Configure device spi to output on a single channel */
> -	st->bops->reg_write(st,
> -			    AD7606_CONFIGURATION_REGISTER,
> -			    AD7606_SINGLE_DOUT);
> +	ret = st->bops->reg_write(st, AD7606_CONFIGURATION_REGISTER,
> +				  AD7606_SINGLE_DOUT);
> +	if (ret)
> +		return ret;
>  
>  	/*
>  	 * Scale can be configured individually for each channel
>