From: Jonathan Cameron <jic23@kernel.org>
To: linux-iio@vger.kernel.org,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Subject: [PATCH v3 14/20] iio: temperature: Use iio_push_to_buffers_with_ts() to provide length for runtime checks.
Date: Sun, 13 Apr 2025 11:34:37 +0100 [thread overview]
Message-ID: <20250413103443.2420727-15-jic23@kernel.org> (raw)
In-Reply-To: <20250413103443.2420727-1-jic23@kernel.org>
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This new function allows us to perform debug checks in the helper to ensure
that the overrun does not occur. Use it in all the simple cases where
either a static buffer or a structure is used in the drivers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
drivers/iio/temperature/hid-sensor-temperature.c | 5 +++--
drivers/iio/temperature/maxim_thermocouple.c | 5 +++--
drivers/iio/temperature/tmp006.c | 4 ++--
3 files changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/iio/temperature/hid-sensor-temperature.c b/drivers/iio/temperature/hid-sensor-temperature.c
index 09f470bb0841..9f628a8e5cfb 100644
--- a/drivers/iio/temperature/hid-sensor-temperature.c
+++ b/drivers/iio/temperature/hid-sensor-temperature.c
@@ -131,8 +131,9 @@ static int temperature_proc_event(struct hid_sensor_hub_device *hsdev,
struct temperature_state *temp_st = iio_priv(indio_dev);
if (atomic_read(&temp_st->common_attributes.data_ready))
- iio_push_to_buffers_with_timestamp(indio_dev, &temp_st->scan,
- iio_get_time_ns(indio_dev));
+ iio_push_to_buffers_with_ts(indio_dev, &temp_st->scan,
+ sizeof(temp_st->scan),
+ iio_get_time_ns(indio_dev));
return 0;
}
diff --git a/drivers/iio/temperature/maxim_thermocouple.c b/drivers/iio/temperature/maxim_thermocouple.c
index dcfcbc434a90..cae8e84821d7 100644
--- a/drivers/iio/temperature/maxim_thermocouple.c
+++ b/drivers/iio/temperature/maxim_thermocouple.c
@@ -168,8 +168,9 @@ static irqreturn_t maxim_thermocouple_trigger_handler(int irq, void *private)
ret = spi_read(data->spi, data->buffer, data->chip->read_size);
if (!ret) {
- iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
- iio_get_time_ns(indio_dev));
+ iio_push_to_buffers_with_ts(indio_dev, data->buffer,
+ sizeof(data->buffer),
+ iio_get_time_ns(indio_dev));
}
iio_trigger_notify_done(indio_dev->trig);
diff --git a/drivers/iio/temperature/tmp006.c b/drivers/iio/temperature/tmp006.c
index b5c94b7492f5..29bff9d8859d 100644
--- a/drivers/iio/temperature/tmp006.c
+++ b/drivers/iio/temperature/tmp006.c
@@ -269,8 +269,8 @@ static irqreturn_t tmp006_trigger_handler(int irq, void *p)
goto err;
scan.channels[1] = ret;
- iio_push_to_buffers_with_timestamp(indio_dev, &scan,
- iio_get_time_ns(indio_dev));
+ iio_push_to_buffers_with_ts(indio_dev, &scan, sizeof(scan),
+ iio_get_time_ns(indio_dev));
err:
iio_trigger_notify_done(indio_dev->trig);
return IRQ_HANDLED;
--
2.49.0
next prev parent reply other threads:[~2025-04-13 10:35 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-13 10:34 [PATCH v3 00/20] IIO: Introduce iio_push_to_buffers_with_ts() taking an input buffer length argument Jonathan Cameron
2025-04-13 10:34 ` [PATCH v3 01/20] iio: adc: ad7266: Fix potential timestamp alignment issue Jonathan Cameron
2025-04-13 10:34 ` [PATCH v3 02/20] iio: adc: ad7768-1: Fix insufficient alignment of timestamp Jonathan Cameron
2025-04-13 10:34 ` [PATCH v3 03/20] iio: adc: dln2: Use aligned_s64 for timestamp Jonathan Cameron
2025-04-13 10:34 ` [PATCH v3 04/20] iio: accel: adxl355: Make timestamp 64-bit aligned using aligned_s64 Jonathan Cameron
2025-04-13 10:34 ` [PATCH v3 05/20] iio: introduced iio_push_to_buffers_with_ts() that takes a data_total_len argument Jonathan Cameron
2025-04-13 10:34 ` [PATCH v3 06/20] iio: dummy: Use a fixed structure to build up scan to push to buffers Jonathan Cameron
2025-04-13 10:34 ` [PATCH v3 07/20] iio: dummy: Switch to iio_push_to_buffers_with_ts() and provide size of storage Jonathan Cameron
2025-04-13 10:34 ` [PATCH v3 08/20] iio: adc: ti-ads131e08: Use new iio_push_to_buffers_with_ts() to provide length sanity check Jonathan Cameron
2025-04-13 10:34 ` [PATCH v3 09/20] iio: adc: Use iio_push_to_buffers_with_ts() to provide length for runtime checks Jonathan Cameron
2025-04-13 10:34 ` [PATCH v3 10/20] iio: accel: " Jonathan Cameron
2025-04-13 10:34 ` [PATCH v3 11/20] iio: accel: hid: " Jonathan Cameron
2025-04-13 10:34 ` [PATCH v3 12/20] iio: chemical: " Jonathan Cameron
2025-04-13 10:34 ` [PATCH v3 13/20] iio: temp: maxim-thermocouple: Fix potential lack of DMA safe buffer Jonathan Cameron
2025-04-13 10:34 ` Jonathan Cameron [this message]
2025-04-13 10:34 ` [PATCH v3 15/20] iio: resolver: Use iio_push_to_buffers_with_ts() to provide length for runtime checks Jonathan Cameron
2025-04-13 10:34 ` [PATCH v3 16/20] iio: proximity: irsd200: Use a struct for scan and iio_push_to_buffers_with_ts() Jonathan Cameron
2025-04-13 10:34 ` [PATCH v3 17/20] iio: proximity: Use iio_push_to_buffers_with_ts() to provide length for runtime checks Jonathan Cameron
2025-04-13 10:34 ` [PATCH v3 18/20] iio: pressure: zpa2326: Use aligned_s64 for the timestamp Jonathan Cameron
2025-04-13 10:34 ` [PATCH v3 19/20] iio: pressure: Use iio_push_to_buffers_with_ts() to provide length for runtime checks Jonathan Cameron
2025-04-13 10:34 ` [PATCH v3 20/20] iio: magnetometer: " Jonathan Cameron
2025-04-16 23:48 ` [PATCH v3 00/20] IIO: Introduce iio_push_to_buffers_with_ts() taking an input buffer length argument David Lechner
2025-04-18 14:38 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250413103443.2420727-15-jic23@kernel.org \
--to=jic23@kernel.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=andy@kernel.org \
--cc=dlechner@baylibre.com \
--cc=linux-iio@vger.kernel.org \
--cc=nuno.sa@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).