From: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
To: jic23@kernel.org, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, dlechner@baylibre.com, nuno.sa@analog.com,
andy@kernel.org
Cc: ~lkcamp/patches@lists.sr.ht, linux-iio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3] dt-bindings: iio: adc: st,spear600-adc: txt to yaml format conversion.
Date: Thu, 22 May 2025 17:37:16 -0300 [thread overview]
Message-ID: <20250522204130.21604-1-rodrigo.gobbi.7@gmail.com> (raw)
Straight forward conversion from spear-adc.txt into yaml format.
Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
---
Changelog:
v3: some yaml style, constraints and units pointed at v2.
also, remove duplicated ref at MAINTAINERS file
v2: https://lore.kernel.org/linux-devicetree/20250430020248.26639-1-rodrigo.gobbi.7@gmail.com/
v1: https://lore.kernel.org/linux-devicetree/20250423022956.31218-1-rodrigo.gobbi.7@gmail.com/
---
.../bindings/iio/adc/st,spear600-adc.yaml | 69 +++++++++++++++++++
.../bindings/staging/iio/adc/spear-adc.txt | 24 -------
MAINTAINERS | 1 -
3 files changed, 69 insertions(+), 25 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/adc/st,spear600-adc.yaml
delete mode 100644 Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt
diff --git a/Documentation/devicetree/bindings/iio/adc/st,spear600-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,spear600-adc.yaml
new file mode 100644
index 000000000000..dd9ec3038703
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/st,spear600-adc.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/st,spear600-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST SPEAr ADC device driver
+
+maintainers:
+ - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+ Integrated ADC inside the ST SPEAr SoC, SPEAr600, supporting
+ 10-bit resolution. Datasheet can be found here:
+ https://www.st.com/resource/en/datasheet/spear600.pdf
+
+properties:
+ compatible:
+ enum:
+ - st,spear600-adc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ sampling-frequency:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 2500000
+ maximum: 20000000
+ description:
+ Default sampling frequency of the ADC in Hz.
+
+ vref-external:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1000
+ maximum: 2800
+ description:
+ External voltage reference in milli-volts. If omitted the internal voltage
+ reference will be used.
+
+ average-samples:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ default: 0
+ description:
+ Number of samples to generate an average value. If omitted, single data
+ conversion will be used.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - sampling-frequency
+
+additionalProperties: false
+
+examples:
+ - |
+ adc@d8200000 {
+ compatible = "st,spear600-adc";
+ reg = <0xd8200000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <6>;
+ sampling-frequency = <5000000>;
+ vref-external = <2500>; /* 2.5V VRef */
+ };
diff --git a/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt b/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt
deleted file mode 100644
index 88bc94fe1f6d..000000000000
--- a/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* ST SPEAr ADC device driver
-
-Required properties:
-- compatible: Should be "st,spear600-adc"
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the ADC interrupt
-- sampling-frequency: Default sampling frequency
-
-Optional properties:
-- vref-external: External voltage reference in milli-volts. If omitted
- the internal voltage reference will be used.
-- average-samples: Number of samples to generate an average value. If
- omitted, single data conversion will be used.
-
-Examples:
-
- adc: adc@d8200000 {
- compatible = "st,spear600-adc";
- reg = <0xd8200000 0x1000>;
- interrupt-parent = <&vic1>;
- interrupts = <6>;
- sampling-frequency = <5000000>;
- vref-external = <2500>; /* 2.5V VRef */
- };
diff --git a/MAINTAINERS b/MAINTAINERS
index 906881b6c5cb..96760a05a5c5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -23213,7 +23213,6 @@ STAGING - INDUSTRIAL IO
M: Jonathan Cameron <jic23@kernel.org>
L: linux-iio@vger.kernel.org
S: Odd Fixes
-F: Documentation/devicetree/bindings/staging/iio/
F: drivers/staging/iio/
STAGING - NVIDIA COMPLIANT EMBEDDED CONTROLLER INTERFACE (nvec)
--
2.49.0
next reply other threads:[~2025-05-22 20:41 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-22 20:37 Rodrigo Gobbi [this message]
2025-05-26 15:55 ` [PATCH v3] dt-bindings: iio: adc: st,spear600-adc: txt to yaml format conversion Conor Dooley
2025-06-26 20:54 ` Rodrigo Gobbi
2025-06-27 15:53 ` Conor Dooley
2025-06-28 14:48 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250522204130.21604-1-rodrigo.gobbi.7@gmail.com \
--to=rodrigo.gobbi.7@gmail.com \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
--cc=~lkcamp/patches@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox