From: Lothar Rubusch <l.rubusch@gmail.com>
To: jic23@kernel.org, dlechner@baylibre.com, nuno.sa@analog.com,
andy@kernel.org, corbet@lwn.net, lucas.p.stankus@gmail.com,
lars@metafoo.de, Michael.Hennerich@analog.com,
bagasdotme@gmail.com
Cc: l.rubusch@gmail.com, linux-iio@vger.kernel.org,
linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v4 08/11] iio: accel: adxl313: add inactivity sensing
Date: Sun, 1 Jun 2025 17:21:36 +0000 [thread overview]
Message-ID: <20250601172139.59156-9-l.rubusch@gmail.com> (raw)
In-Reply-To: <20250601172139.59156-1-l.rubusch@gmail.com>
Extend the interrupt handler to process interrupts as inactivity events.
Add functions to set threshold and period registers for inactivity. Add
functions to enable / disable inactivity. Extend the fake iio channel to
deal with inactivity events on x, y and z combined with AND.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
---
drivers/iio/accel/adxl313.h | 2 +
drivers/iio/accel/adxl313_core.c | 159 +++++++++++++++++++++++++------
2 files changed, 131 insertions(+), 30 deletions(-)
diff --git a/drivers/iio/accel/adxl313.h b/drivers/iio/accel/adxl313.h
index 4f4a9fd39f6d..d7e8cb44855b 100644
--- a/drivers/iio/accel/adxl313.h
+++ b/drivers/iio/accel/adxl313.h
@@ -18,6 +18,8 @@
#define ADXL313_REG_SOFT_RESET 0x18
#define ADXL313_REG_OFS_AXIS(index) (0x1E + (index))
#define ADXL313_REG_THRESH_ACT 0x24
+#define ADXL313_REG_THRESH_INACT 0x25
+#define ADXL313_REG_TIME_INACT 0x26
#define ADXL313_REG_ACT_INACT_CTL 0x27
#define ADXL313_REG_BW_RATE 0x2C
#define ADXL313_REG_POWER_CTL 0x2D
diff --git a/drivers/iio/accel/adxl313_core.c b/drivers/iio/accel/adxl313_core.c
index e647c40575ab..c5767d56b0cb 100644
--- a/drivers/iio/accel/adxl313_core.c
+++ b/drivers/iio/accel/adxl313_core.c
@@ -28,18 +28,22 @@
#define ADXL313_REG_XYZ_BASE ADXL313_REG_DATA_AXIS(0)
#define ADXL313_ACT_XYZ_EN GENMASK(6, 4)
+#define ADXL313_INACT_XYZ_EN GENMASK(2, 0)
/* activity/inactivity */
enum adxl313_activity_type {
ADXL313_ACTIVITY,
+ ADXL313_INACTIVITY,
};
static const unsigned int adxl313_act_int_reg[] = {
[ADXL313_ACTIVITY] = ADXL313_INT_ACTIVITY,
+ [ADXL313_INACTIVITY] = ADXL313_INT_INACTIVITY,
};
static const unsigned int adxl313_act_thresh_reg[] = {
[ADXL313_ACTIVITY] = ADXL313_REG_THRESH_ACT,
+ [ADXL313_INACTIVITY] = ADXL313_REG_THRESH_INACT,
};
static const struct regmap_range adxl312_readable_reg_range[] = {
@@ -253,6 +257,16 @@ static const struct iio_event_spec adxl313_activity_events[] = {
},
};
+static const struct iio_event_spec adxl313_inactivity_events[] = {
+ {
+ .type = IIO_EV_TYPE_MAG,
+ .dir = IIO_EV_DIR_FALLING,
+ .mask_separate = BIT(IIO_EV_INFO_ENABLE),
+ .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_PERIOD),
+ },
+};
+
enum adxl313_chans {
chan_x, chan_y, chan_z,
};
@@ -269,6 +283,14 @@ static const struct iio_chan_spec adxl313_channels[] = {
.event_spec = adxl313_activity_events,
.num_event_specs = ARRAY_SIZE(adxl313_activity_events),
},
+ {
+ .type = IIO_ACCEL,
+ .modified = 1,
+ .channel2 = IIO_MOD_X_AND_Y_AND_Z,
+ .scan_index = -1, /* Fake channel for axis AND'ing */
+ .event_spec = adxl313_inactivity_events,
+ .num_event_specs = ARRAY_SIZE(adxl313_inactivity_events),
+ },
};
static const unsigned long adxl313_scan_masks[] = {
@@ -331,6 +353,15 @@ static int adxl313_read_freq_avail(struct iio_dev *indio_dev,
}
}
+static int adxl313_set_inact_time_s(struct adxl313_data *data,
+ unsigned int val_s)
+{
+ unsigned int max_boundary = 255;
+ unsigned int val = min(val_s, max_boundary);
+
+ return regmap_write(data->regmap, ADXL313_REG_TIME_INACT, val);
+}
+
static int adxl313_is_act_inact_en(struct adxl313_data *data,
enum adxl313_activity_type type)
{
@@ -343,10 +374,10 @@ static int adxl313_is_act_inact_en(struct adxl313_data *data,
return ret;
/* Check if axis for activity are enabled */
- if (type != ADXL313_ACTIVITY)
- return 0;
-
- axis_en = FIELD_GET(ADXL313_ACT_XYZ_EN, axis_ctrl);
+ if (type == ADXL313_ACTIVITY)
+ axis_en = FIELD_GET(ADXL313_ACT_XYZ_EN, axis_ctrl);
+ else
+ axis_en = FIELD_GET(ADXL313_INACT_XYZ_EN, axis_ctrl);
/* The axis are enabled, now check if specific interrupt is enabled */
ret = regmap_read(data->regmap, ADXL313_REG_INT_ENABLE, ®val);
@@ -364,12 +395,14 @@ static int adxl313_set_act_inact_en(struct adxl313_data *data,
{
unsigned int axis_ctrl;
unsigned int threshold;
+ unsigned int inact_time_s;
+ bool en;
int ret;
- if (type != ADXL313_ACTIVITY)
- return 0;
-
- axis_ctrl = ADXL313_ACT_XYZ_EN;
+ if (type == ADXL313_ACTIVITY)
+ axis_ctrl = ADXL313_ACT_XYZ_EN;
+ else
+ axis_ctrl = ADXL313_INACT_XYZ_EN;
ret = adxl313_set_measure_en(data, false);
if (ret)
@@ -384,9 +417,17 @@ static int adxl313_set_act_inact_en(struct adxl313_data *data,
if (ret)
return ret;
+ en = cmd_en && threshold;
+ if (type == ADXL313_INACTIVITY) {
+ ret = regmap_read(data->regmap, ADXL313_REG_TIME_INACT, &inact_time_s);
+ if (ret)
+ return ret;
+
+ en = en && inact_time_s;
+ }
+
ret = regmap_assign_bits(data->regmap, ADXL313_REG_INT_ENABLE,
- adxl313_act_int_reg[type],
- cmd_en && threshold);
+ adxl313_act_int_reg[type], en);
if (ret)
return ret;
@@ -479,6 +520,8 @@ static int adxl313_read_event_config(struct iio_dev *indio_dev,
switch (dir) {
case IIO_EV_DIR_RISING:
return adxl313_is_act_inact_en(data, ADXL313_ACTIVITY);
+ case IIO_EV_DIR_FALLING:
+ return adxl313_is_act_inact_en(data, ADXL313_INACTIVITY);
default:
return -EINVAL;
}
@@ -498,6 +541,8 @@ static int adxl313_write_event_config(struct iio_dev *indio_dev,
switch (dir) {
case IIO_EV_DIR_RISING:
return adxl313_set_act_inact_en(data, ADXL313_ACTIVITY, state);
+ case IIO_EV_DIR_FALLING:
+ return adxl313_set_act_inact_en(data, ADXL313_INACTIVITY, state);
default:
return -EINVAL;
}
@@ -512,6 +557,8 @@ static int adxl313_read_event_value(struct iio_dev *indio_dev,
{
struct adxl313_data *data = iio_priv(indio_dev);
unsigned int act_threshold;
+ unsigned int inact_threshold;
+ unsigned int inact_time_s;
int ret;
/* Measurement stays enabled, reading from regmap cache */
@@ -519,19 +566,38 @@ static int adxl313_read_event_value(struct iio_dev *indio_dev,
if (type != IIO_EV_TYPE_MAG)
return -EINVAL;
- if (info != IIO_EV_INFO_VALUE)
- return -EINVAL;
-
- switch (dir) {
- case IIO_EV_DIR_RISING:
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ switch (dir) {
+ case IIO_EV_DIR_RISING:
+ ret = regmap_read(data->regmap,
+ adxl313_act_thresh_reg[ADXL313_ACTIVITY],
+ &act_threshold);
+ if (ret)
+ return ret;
+ *val = act_threshold * 15625;
+ *val2 = MICRO;
+ return IIO_VAL_FRACTIONAL;
+ case IIO_EV_DIR_FALLING:
+ ret = regmap_read(data->regmap,
+ adxl313_act_thresh_reg[ADXL313_INACTIVITY],
+ &inact_threshold);
+ if (ret)
+ return ret;
+ *val = inact_threshold * 15625;
+ *val2 = MICRO;
+ return IIO_VAL_FRACTIONAL;
+ default:
+ return -EINVAL;
+ }
+ case IIO_EV_INFO_PERIOD:
ret = regmap_read(data->regmap,
- adxl313_act_thresh_reg[ADXL313_ACTIVITY],
- &act_threshold);
+ ADXL313_REG_TIME_INACT,
+ &inact_time_s);
if (ret)
return ret;
- *val = act_threshold * 15625;
- *val2 = MICRO;
- return IIO_VAL_FRACTIONAL;
+ *val = inact_time_s;
+ return IIO_VAL_INT;
default:
return -EINVAL;
}
@@ -555,16 +621,30 @@ static int adxl313_write_event_value(struct iio_dev *indio_dev,
if (type != IIO_EV_TYPE_MAG)
return -EINVAL;
- if (info != IIO_EV_INFO_VALUE)
- return -EINVAL;
-
- /* Scale factor 15.625 mg/LSB */
- regval = DIV_ROUND_CLOSEST(MICRO * val + val2, 15625);
- switch (dir) {
- case IIO_EV_DIR_RISING:
- ret = regmap_write(data->regmap,
- adxl313_act_thresh_reg[ADXL313_ACTIVITY],
- regval);
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ /* Scale factor 15.625 mg/LSB */
+ regval = DIV_ROUND_CLOSEST(MICRO * val + val2, 15625);
+ switch (dir) {
+ case IIO_EV_DIR_RISING:
+ ret = regmap_write(data->regmap,
+ adxl313_act_thresh_reg[ADXL313_ACTIVITY],
+ regval);
+ if (ret)
+ return ret;
+ return adxl313_set_measure_en(data, true);
+ case IIO_EV_DIR_FALLING:
+ ret = regmap_write(data->regmap,
+ adxl313_act_thresh_reg[ADXL313_INACTIVITY],
+ regval);
+ if (ret)
+ return ret;
+ return adxl313_set_measure_en(data, true);
+ default:
+ return -EINVAL;
+ }
+ case IIO_EV_INFO_PERIOD:
+ ret = adxl313_set_inact_time_s(data, val);
if (ret)
return ret;
return adxl313_set_measure_en(data, true);
@@ -721,6 +801,17 @@ static int adxl313_push_event(struct iio_dev *indio_dev, int int_stat)
return ret;
}
+ if (FIELD_GET(ADXL313_INT_INACTIVITY, int_stat)) {
+ ret = iio_push_event(indio_dev,
+ IIO_MOD_EVENT_CODE(IIO_ACCEL, 0,
+ IIO_MOD_X_AND_Y_AND_Z,
+ IIO_EV_TYPE_MAG,
+ IIO_EV_DIR_FALLING),
+ ts);
+ if (ret)
+ return ret;
+ }
+
if (FIELD_GET(ADXL313_INT_WATERMARK, int_stat)) {
samples = adxl313_get_samples(data);
if (samples < 0)
@@ -895,6 +986,14 @@ int adxl313_core_probe(struct device *dev,
if (ret)
return ret;
+ ret = regmap_write(data->regmap, ADXL313_REG_TIME_INACT, 5);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(data->regmap, ADXL313_REG_THRESH_INACT, 0x4f);
+ if (ret)
+ return ret;
+
ret = regmap_write(data->regmap, ADXL313_REG_THRESH_ACT, 0x52);
if (ret)
return ret;
--
2.39.5
next prev parent reply other threads:[~2025-06-01 17:22 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-01 17:21 [PATCH v4 00/11] iio: accel: adxl313: add power-save on activity/inactivity Lothar Rubusch
2025-06-01 17:21 ` [PATCH v4 01/11] iio: accel: adxl313: add debug register Lothar Rubusch
2025-06-01 19:06 ` Andy Shevchenko
2025-06-08 15:14 ` Jonathan Cameron
2025-06-01 17:21 ` [PATCH v4 02/11] iio: accel: adxl313: introduce channel buffer Lothar Rubusch
2025-06-01 19:08 ` Andy Shevchenko
2025-06-11 8:01 ` Lothar Rubusch
2025-06-11 8:42 ` Andy Shevchenko
2025-06-08 15:17 ` Jonathan Cameron
2025-06-01 17:21 ` [PATCH v4 03/11] iio: accel: adxl313: make use of regmap cache Lothar Rubusch
2025-06-01 19:09 ` Andy Shevchenko
2025-06-08 15:22 ` Jonathan Cameron
2025-06-08 15:38 ` Jonathan Cameron
2025-06-11 13:48 ` Lothar Rubusch
2025-06-11 15:04 ` Jonathan Cameron
2025-06-01 17:21 ` [PATCH v4 04/11] iio: accel: adxl313: add function to enable measurement Lothar Rubusch
2025-06-01 19:12 ` Andy Shevchenko
2025-06-08 15:27 ` Jonathan Cameron
2025-06-11 8:55 ` Lothar Rubusch
2025-06-11 15:05 ` Jonathan Cameron
2025-06-01 17:21 ` [PATCH v4 05/11] iio: accel: adxl313: prepare interrupt handling Lothar Rubusch
2025-06-01 19:21 ` Andy Shevchenko
2025-06-11 8:26 ` Lothar Rubusch
2025-06-01 17:21 ` [PATCH v4 06/11] iio: accel: adxl313: add basic interrupt handling for FIFO watermark Lothar Rubusch
2025-06-01 19:26 ` Andy Shevchenko
2025-06-08 15:30 ` Jonathan Cameron
2025-06-08 15:44 ` Jonathan Cameron
2025-06-01 17:21 ` [PATCH v4 07/11] iio: accel: adxl313: add activity sensing Lothar Rubusch
2025-06-01 19:38 ` Andy Shevchenko
2025-06-11 14:49 ` Lothar Rubusch
2025-06-11 15:05 ` Andy Shevchenko
2025-06-11 15:15 ` Jonathan Cameron
2025-06-11 15:23 ` Andy Shevchenko
2025-06-08 16:08 ` Jonathan Cameron
2025-06-11 15:06 ` Lothar Rubusch
2025-06-11 16:47 ` Jonathan Cameron
2025-06-01 17:21 ` Lothar Rubusch [this message]
2025-06-01 19:45 ` [PATCH v4 08/11] iio: accel: adxl313: add inactivity sensing Andy Shevchenko
2025-06-11 15:36 ` Lothar Rubusch
2025-06-11 16:52 ` Jonathan Cameron
2025-06-08 16:14 ` Jonathan Cameron
2025-06-01 17:21 ` [PATCH v4 09/11] iio: accel: adxl313: implement power-save on inactivity Lothar Rubusch
2025-06-08 16:15 ` Jonathan Cameron
2025-06-01 17:21 ` [PATCH v4 10/11] iio: accel: adxl313: add AC coupled activity/inactivity events Lothar Rubusch
2025-06-01 19:53 ` Andy Shevchenko
2025-06-11 17:12 ` Lothar Rubusch
2025-06-08 16:23 ` Jonathan Cameron
2025-06-11 19:58 ` Lothar Rubusch
2025-06-14 13:33 ` Jonathan Cameron
2025-06-01 17:21 ` [PATCH v4 11/11] docs: iio: add ADXL313 accelerometer Lothar Rubusch
2025-06-02 1:07 ` [PATCH v4 00/11] iio: accel: adxl313: add power-save on activity/inactivity Bagas Sanjaya
2025-06-11 20:04 ` Lothar Rubusch
2025-06-12 12:41 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250601172139.59156-9-l.rubusch@gmail.com \
--to=l.rubusch@gmail.com \
--cc=Michael.Hennerich@analog.com \
--cc=andy@kernel.org \
--cc=bagasdotme@gmail.com \
--cc=corbet@lwn.net \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-doc@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lucas.p.stankus@gmail.com \
--cc=nuno.sa@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).