[PATCH v9 05/11] iio: accel: adxl345: simplify reading the FIFO

[Lothar Rubusch <l.rubusch@gmail.com>]

Bulk reading from the FIFO can be simplified. Remove unnecessary
variables and simplify reading sets of x-, y- and z-axis measurements.

This is a refactoring change and should not impact functionality.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
---
 drivers/iio/accel/adxl345_core.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c
index 18c625d323ba..dcfbfe4cac0f 100644
--- a/drivers/iio/accel/adxl345_core.c
+++ b/drivers/iio/accel/adxl345_core.c
@@ -884,15 +884,13 @@ static int adxl345_get_samples(struct adxl345_state *st)
  */
 static int adxl345_fifo_transfer(struct adxl345_state *st, int samples)
 {
-	size_t count;
 	int i, ret = 0;
 
-	/* count is the 3x the fifo_buf element size, hence 6B */
-	count = sizeof(st->fifo_buf[0]) * ADXL345_DIRS;
 	for (i = 0; i < samples; i++) {
 		/* read 3x 2 byte elements from base address into next fifo_buf position */
 		ret = regmap_bulk_read(st->regmap, ADXL345_REG_XYZ_BASE,
-				       st->fifo_buf + (i * count / 2), count);
+				       st->fifo_buf + (i * ADXL345_DIRS),
+				       2 * ADXL345_DIRS);
 		if (ret)
 			return ret;
 
-- 
2.39.5