[PATCH v5 2/8] iio: accel: adxl313: add function to enable measurement

[Lothar Rubusch <l.rubusch@gmail.com>]

Refactor the control of measurement and standby modes for the sensor.
Instead of directly writing to the register, encapsulate this operation
in a dedicated function that handles enabling and disabling measurement.
This approach will reduce code duplication wherever sensor configuration
changes are required. In subsequent patches, measurement mode will be
set to standby as part of this process.

Additionally, simplify the control mask to include only the measurement
bit. The sleep bit governs a different behavior—putting the sensor into
sleep mode, not just standby for configuration—and is currently unused.
Therefore, there's no need to include both the sleep and measurement
bits in the same mask.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
---
 drivers/iio/accel/adxl313.h      |  3 +--
 drivers/iio/accel/adxl313_core.c | 10 +++++++---
 2 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/accel/adxl313.h b/drivers/iio/accel/adxl313.h
index 2bc86ac8ffd4..6958a00f5e8f 100644
--- a/drivers/iio/accel/adxl313.h
+++ b/drivers/iio/accel/adxl313.h
@@ -37,8 +37,7 @@
 #define ADXL313_RATE_MSK		GENMASK(3, 0)
 #define ADXL313_RATE_BASE		6
 
-#define ADXL313_POWER_CTL_MSK		GENMASK(3, 2)
-#define ADXL313_MEASUREMENT_MODE	BIT(3)
+#define ADXL313_POWER_CTL_MSK		BIT(3)
 
 #define ADXL313_RANGE_MSK		GENMASK(1, 0)
 #define ADXL313_RANGE_MAX		3
diff --git a/drivers/iio/accel/adxl313_core.c b/drivers/iio/accel/adxl313_core.c
index 39f16f97bb4a..99a7f3755031 100644
--- a/drivers/iio/accel/adxl313_core.c
+++ b/drivers/iio/accel/adxl313_core.c
@@ -64,6 +64,12 @@ bool adxl313_is_volatile_reg(struct device *dev, unsigned int reg)
 }
 EXPORT_SYMBOL_NS_GPL(adxl313_is_volatile_reg, "IIO_ADXL313");
 
+static int adxl313_set_measure_en(struct adxl313_data *data, bool en)
+{
+	return regmap_assign_bits(data->regmap, ADXL313_REG_POWER_CTL,
+				  ADXL313_POWER_CTL_MSK, en);
+}
+
 static int adxl312_check_id(struct device *dev,
 			    struct adxl313_data *data)
 {
@@ -398,9 +404,7 @@ static int adxl313_setup(struct device *dev, struct adxl313_data *data,
 	}
 
 	/* Enables measurement mode */
-	return regmap_update_bits(data->regmap, ADXL313_REG_POWER_CTL,
-				  ADXL313_POWER_CTL_MSK,
-				  ADXL313_MEASUREMENT_MODE);
+	return adxl313_set_measure_en(data, true);
 }
 
 /**
-- 
2.39.5