linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Lothar Rubusch <l.rubusch@gmail.com>
Cc: dlechner@baylibre.com, nuno.sa@analog.com, andy@kernel.org,
	corbet@lwn.net, lucas.p.stankus@gmail.com, lars@metafoo.de,
	Michael.Hennerich@analog.com, bagasdotme@gmail.com,
	linux-iio@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 1/8] iio: accel: adxl313: make use of regmap cache
Date: Sun, 22 Jun 2025 12:12:52 +0100	[thread overview]
Message-ID: <20250622121252.56c80b35@jic23-huawei> (raw)
In-Reply-To: <20250615222258.117771-2-l.rubusch@gmail.com>

On Sun, 15 Jun 2025 22:22:51 +0000
Lothar Rubusch <l.rubusch@gmail.com> wrote:

> Setup regmap cache to cache register configuration, reducing bus traffic
> for repeated accesses to non volatile registers.
> 
> Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Applied but there was some fuzz. That makes me wonder what
is different between our trees.

Maybe it will become clear later in the patch set.

Thanks

Jonathan

> ---
>  drivers/iio/accel/adxl313.h      |  3 +++
>  drivers/iio/accel/adxl313_core.c | 18 ++++++++++++++++++
>  drivers/iio/accel/adxl313_i2c.c  |  6 ++++++
>  drivers/iio/accel/adxl313_spi.c  |  6 ++++++
>  4 files changed, 33 insertions(+)
> 
> diff --git a/drivers/iio/accel/adxl313.h b/drivers/iio/accel/adxl313.h
> index 72f624af4686..2bc86ac8ffd4 100644
> --- a/drivers/iio/accel/adxl313.h
> +++ b/drivers/iio/accel/adxl313.h
> @@ -22,6 +22,7 @@
>  #define ADXL313_REG_BW_RATE		0x2C
>  #define ADXL313_REG_POWER_CTL		0x2D
>  #define ADXL313_REG_INT_MAP		0x2F
> +#define ADXL313_REG_INT_SOURCE		0x30
>  #define ADXL313_REG_DATA_FORMAT		0x31
>  #define ADXL313_REG_DATA_AXIS(index)	(0x32 + ((index) * 2))
>  #define ADXL313_REG_FIFO_CTL		0x38
> @@ -54,6 +55,8 @@ extern const struct regmap_access_table adxl312_writable_regs_table;
>  extern const struct regmap_access_table adxl313_writable_regs_table;
>  extern const struct regmap_access_table adxl314_writable_regs_table;
>  
> +bool adxl313_is_volatile_reg(struct device *dev, unsigned int reg);
> +
>  enum adxl313_device_type {
>  	ADXL312,
>  	ADXL313,
> diff --git a/drivers/iio/accel/adxl313_core.c b/drivers/iio/accel/adxl313_core.c
> index 2f26da5857d4..39f16f97bb4a 100644
> --- a/drivers/iio/accel/adxl313_core.c
> +++ b/drivers/iio/accel/adxl313_core.c
> @@ -46,6 +46,24 @@ const struct regmap_access_table adxl314_readable_regs_table = {
>  };
>  EXPORT_SYMBOL_NS_GPL(adxl314_readable_regs_table, IIO_ADXL313);
>  
> +bool adxl313_is_volatile_reg(struct device *dev, unsigned int reg)
> +{
> +	switch (reg) {
> +	case ADXL313_REG_DATA_AXIS(0):
> +	case ADXL313_REG_DATA_AXIS(1):
> +	case ADXL313_REG_DATA_AXIS(2):
> +	case ADXL313_REG_DATA_AXIS(3):
> +	case ADXL313_REG_DATA_AXIS(4):
> +	case ADXL313_REG_DATA_AXIS(5):
> +	case ADXL313_REG_FIFO_STATUS:
> +	case ADXL313_REG_INT_SOURCE:
> +		return true;
> +	default:
> +		return false;
> +	}
> +}
> +EXPORT_SYMBOL_NS_GPL(adxl313_is_volatile_reg, "IIO_ADXL313");
> +
>  static int adxl312_check_id(struct device *dev,
>  			    struct adxl313_data *data)
>  {
> diff --git a/drivers/iio/accel/adxl313_i2c.c b/drivers/iio/accel/adxl313_i2c.c
> index a4cf0cf2c5aa..e8636e8ab14f 100644
> --- a/drivers/iio/accel/adxl313_i2c.c
> +++ b/drivers/iio/accel/adxl313_i2c.c
> @@ -21,6 +21,8 @@ static const struct regmap_config adxl31x_i2c_regmap_config[] = {
>  		.rd_table	= &adxl312_readable_regs_table,
>  		.wr_table	= &adxl312_writable_regs_table,
>  		.max_register	= 0x39,
> +		.volatile_reg	= adxl313_is_volatile_reg,
> +		.cache_type	= REGCACHE_MAPLE,
>  	},
>  	[ADXL313] = {
>  		.reg_bits	= 8,
> @@ -28,6 +30,8 @@ static const struct regmap_config adxl31x_i2c_regmap_config[] = {
>  		.rd_table	= &adxl313_readable_regs_table,
>  		.wr_table	= &adxl313_writable_regs_table,
>  		.max_register	= 0x39,
> +		.volatile_reg	= adxl313_is_volatile_reg,
> +		.cache_type	= REGCACHE_MAPLE,
>  	},
>  	[ADXL314] = {
>  		.reg_bits	= 8,
> @@ -35,6 +39,8 @@ static const struct regmap_config adxl31x_i2c_regmap_config[] = {
>  		.rd_table	= &adxl314_readable_regs_table,
>  		.wr_table	= &adxl314_writable_regs_table,
>  		.max_register	= 0x39,
> +		.volatile_reg	= adxl313_is_volatile_reg,
> +		.cache_type	= REGCACHE_MAPLE,
>  	},
>  };
>  
> diff --git a/drivers/iio/accel/adxl313_spi.c b/drivers/iio/accel/adxl313_spi.c
> index 9a16b40bff34..68e323e81aeb 100644
> --- a/drivers/iio/accel/adxl313_spi.c
> +++ b/drivers/iio/accel/adxl313_spi.c
> @@ -24,6 +24,8 @@ static const struct regmap_config adxl31x_spi_regmap_config[] = {
>  		.max_register	= 0x39,
>  		/* Setting bits 7 and 6 enables multiple-byte read */
>  		.read_flag_mask	= BIT(7) | BIT(6),
> +		.volatile_reg	= adxl313_is_volatile_reg,
> +		.cache_type	= REGCACHE_MAPLE,
>  	},
>  	[ADXL313] = {
>  		.reg_bits	= 8,
> @@ -33,6 +35,8 @@ static const struct regmap_config adxl31x_spi_regmap_config[] = {
>  		.max_register	= 0x39,
>  		/* Setting bits 7 and 6 enables multiple-byte read */
>  		.read_flag_mask	= BIT(7) | BIT(6),
> +		.volatile_reg	= adxl313_is_volatile_reg,
> +		.cache_type	= REGCACHE_MAPLE,
>  	},
>  	[ADXL314] = {
>  		.reg_bits	= 8,
> @@ -42,6 +46,8 @@ static const struct regmap_config adxl31x_spi_regmap_config[] = {
>  		.max_register	= 0x39,
>  		/* Setting bits 7 and 6 enables multiple-byte read */
>  		.read_flag_mask	= BIT(7) | BIT(6),
> +		.volatile_reg	= adxl313_is_volatile_reg,
> +		.cache_type	= REGCACHE_MAPLE,
>  	},
>  };
>  


  reply	other threads:[~2025-06-22 11:13 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-15 22:22 [PATCH v5 0/8] iio: accel: adxl313: add power-save on activity/inactivity Lothar Rubusch
2025-06-15 22:22 ` [PATCH v5 1/8] iio: accel: adxl313: make use of regmap cache Lothar Rubusch
2025-06-22 11:12   ` Jonathan Cameron [this message]
2025-06-15 22:22 ` [PATCH v5 2/8] iio: accel: adxl313: add function to enable measurement Lothar Rubusch
2025-06-22 11:13   ` Jonathan Cameron
2025-06-15 22:22 ` [PATCH v5 3/8] iio: accel: adxl313: add buffered FIFO watermark with interrupt handling Lothar Rubusch
2025-06-16  9:32   ` Andy Shevchenko
2025-06-17  9:27     ` Lothar Rubusch
2025-06-22 11:28   ` Jonathan Cameron
2025-06-15 22:22 ` [PATCH v5 4/8] iio: accel: adxl313: add activity sensing Lothar Rubusch
2025-06-16  9:35   ` Andy Shevchenko
2025-06-15 22:22 ` [PATCH v5 5/8] iio: accel: adxl313: add inactivity sensing Lothar Rubusch
2025-06-16 10:58   ` Andy Shevchenko
2025-06-17 10:10     ` Lothar Rubusch
2025-06-17 11:54       ` Andy Shevchenko
2025-06-15 22:22 ` [PATCH v5 6/8] iio: accel: adxl313: implement power-save on inactivity Lothar Rubusch
2025-06-15 22:22 ` [PATCH v5 7/8] iio: accel: adxl313: add AC coupled activity/inactivity events Lothar Rubusch
2025-06-16 11:08   ` Andy Shevchenko
2025-06-22 11:37   ` Jonathan Cameron
2025-06-15 22:22 ` [PATCH v5 8/8] docs: iio: add ADXL313 accelerometer Lothar Rubusch
2025-06-16 10:59 ` [PATCH v5 0/8] iio: accel: adxl313: add power-save on activity/inactivity Andy Shevchenko
2025-06-17  1:14 ` Bagas Sanjaya
2025-06-25  8:15   ` Lothar Rubusch

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250622121252.56c80b35@jic23-huawei \
    --to=jic23@kernel.org \
    --cc=Michael.Hennerich@analog.com \
    --cc=andy@kernel.org \
    --cc=bagasdotme@gmail.com \
    --cc=corbet@lwn.net \
    --cc=dlechner@baylibre.com \
    --cc=l.rubusch@gmail.com \
    --cc=lars@metafoo.de \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lucas.p.stankus@gmail.com \
    --cc=nuno.sa@analog.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).