From: Petre Rodan <petre.rodan@subdimension.ro>
To: "Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Petre Rodan <petre.rodan@subdimension.ro>
Subject: [PATCH v2 11/14] iio: accel: bma220: add interrupt trigger
Date: Wed, 10 Sep 2025 10:57:16 +0300 [thread overview]
Message-ID: <20250910-bma220_improvements-v2-11-e23f4f2b9745@subdimension.ro> (raw)
In-Reply-To: <20250910-bma220_improvements-v2-0-e23f4f2b9745@subdimension.ro>
Add interrupt trigger.
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
---
no change, just patch split
---
drivers/iio/accel/bma220_core.c | 62 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 62 insertions(+)
diff --git a/drivers/iio/accel/bma220_core.c b/drivers/iio/accel/bma220_core.c
index b619f5a0bf713b4d386a5d4fc1d919e144798f02..69bfd7f9f2b35e67835c6e1e41e02258e6741e7b 100644
--- a/drivers/iio/accel/bma220_core.c
+++ b/drivers/iio/accel/bma220_core.c
@@ -23,6 +23,7 @@
#include <linux/iio/buffer.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
@@ -126,6 +127,7 @@ struct bma220_data {
struct regmap *regmap;
struct mutex lock;
u8 range_idx;
+ struct iio_trigger *trig;
struct {
s8 chans[3];
/* Ensure timestamp is naturally aligned. */
@@ -194,6 +196,23 @@ const struct regmap_config bma220_i2c_regmap_config = {
};
EXPORT_SYMBOL_NS_GPL(bma220_i2c_regmap_config, "IIO_BOSCH_BMA220");
+static int bma220_data_rdy_trigger_set_state(struct iio_trigger *trig,
+ bool state)
+{
+ struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+ struct bma220_data *data = iio_priv(indio_dev);
+
+ guard(mutex)(&data->lock);
+ return regmap_update_bits(data->regmap, BMA220_REG_IE0,
+ BMA220_INT_EN_DRDY_MSK,
+ FIELD_PREP(BMA220_INT_EN_DRDY_MSK, state));
+}
+
+static const struct iio_trigger_ops bma220_trigger_ops = {
+ .set_trigger_state = &bma220_data_rdy_trigger_set_state,
+ .validate_device = &iio_trigger_validate_own_device,
+};
+
static irqreturn_t bma220_trigger_handler(int irq, void *p)
{
int ret;
@@ -418,6 +437,25 @@ static void bma220_deinit(void *data_ptr)
ERR_PTR(ret));
}
+static irqreturn_t bma220_irq_handler(int irq, void *private)
+{
+ struct iio_dev *indio_dev = private;
+ struct bma220_data *data = iio_priv(indio_dev);
+ int rv;
+ u8 bma220_reg_if[2];
+
+ guard(mutex)(&data->lock);
+ rv = regmap_bulk_read(data->regmap, BMA220_REG_IF0, bma220_reg_if,
+ sizeof(bma220_reg_if));
+ if (rv)
+ return IRQ_NONE;
+
+ if (FIELD_GET(BMA220_IF_DRDY, bma220_reg_if[1]))
+ iio_trigger_poll_nested(data->trig);
+
+ return IRQ_HANDLED;
+}
+
int bma220_common_probe(struct device *dev, struct regmap *regmap, int irq)
{
int ret;
@@ -447,6 +485,30 @@ int bma220_common_probe(struct device *dev, struct regmap *regmap, int irq)
indio_dev->num_channels = ARRAY_SIZE(bma220_channels);
indio_dev->available_scan_masks = bma220_accel_scan_masks;
+ if (irq > 0) {
+ data->trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
+ indio_dev->name,
+ iio_device_id(indio_dev));
+ if (!data->trig)
+ return -ENOMEM;
+
+ data->trig->ops = &bma220_trigger_ops;
+ iio_trigger_set_drvdata(data->trig, indio_dev);
+
+ ret = devm_iio_trigger_register(dev, data->trig);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "iio trigger register fail\n");
+ indio_dev->trig = iio_trigger_get(data->trig);
+ ret = devm_request_threaded_irq(dev, irq, NULL,
+ &bma220_irq_handler,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ indio_dev->name, indio_dev);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "request irq %d failed\n", irq);
+ }
+
ret = devm_add_action_or_reset(dev, bma220_deinit, data);
if (ret)
return ret;
--
2.49.1
next prev parent reply other threads:[~2025-09-10 7:58 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-10 7:57 [PATCH v2 00/14] iio: accel: bma220 improvements Petre Rodan
2025-09-10 7:57 ` [PATCH v2 01/14] dt-bindings: iio: accel: bosch,bma220 cleanup typo Petre Rodan
2025-09-11 7:31 ` Krzysztof Kozlowski
2025-09-10 7:57 ` [PATCH v2 02/14] dt-bindings: iio: accel: bosch,bma220 setup SPI clock mode Petre Rodan
2025-09-10 17:48 ` Jonathan Cameron
2025-09-11 7:31 ` Krzysztof Kozlowski
2025-09-10 7:57 ` [PATCH v2 03/14] dt-bindings: iio: accel: bosch,bma220 change irq type Petre Rodan
2025-09-11 7:33 ` Krzysztof Kozlowski
2025-09-11 9:53 ` Petre Rodan
2025-09-10 7:57 ` [PATCH v2 04/14] iio: accel: bma220: split original driver Petre Rodan
2025-09-10 17:56 ` Jonathan Cameron
2025-09-11 19:01 ` David Lechner
2025-09-10 7:57 ` [PATCH v2 05/14] iio: accel: bma220: add open firmware table Petre Rodan
2025-09-10 7:57 ` [PATCH v2 06/14] iio: accel: bma220: add get regulator check Petre Rodan
2025-09-10 17:58 ` Jonathan Cameron
2025-09-10 18:51 ` Petre Rodan
2025-09-10 20:28 ` Andy Shevchenko
2025-09-10 7:57 ` [PATCH v2 07/14] iio: accel: bma220: reset registers during init stage Petre Rodan
2025-09-10 18:01 ` Jonathan Cameron
2025-09-11 7:35 ` Krzysztof Kozlowski
2025-09-11 12:36 ` Petre Rodan
2025-09-11 13:07 ` Krzysztof Kozlowski
2025-09-11 13:52 ` Petre Rodan
2025-09-11 13:59 ` Andy Shevchenko
2025-09-11 13:44 ` David Lechner
2025-09-12 14:24 ` Jonathan Cameron
2025-09-11 19:14 ` David Lechner
2025-09-10 7:57 ` [PATCH v2 08/14] iio: accel: bma220: migrate to regmap API Petre Rodan
2025-09-10 18:12 ` Jonathan Cameron
2025-09-12 14:54 ` Petre Rodan
2025-09-13 12:22 ` Jonathan Cameron
2025-09-10 7:57 ` [PATCH v2 09/14] iio: accel: bma220: add i2c module Petre Rodan
2025-09-11 19:23 ` David Lechner
2025-09-10 7:57 ` [PATCH v2 10/14] iio: accel: bma220: add i2c watchdog feature Petre Rodan
2025-09-10 7:57 ` Petre Rodan [this message]
2025-09-10 18:15 ` [PATCH v2 11/14] iio: accel: bma220: add interrupt trigger Jonathan Cameron
2025-09-10 7:57 ` [PATCH v2 12/14] iio: accel: bma220: add LPF cut-off frequency mapping Petre Rodan
2025-09-10 18:16 ` Jonathan Cameron
2025-09-10 7:57 ` [PATCH v2 13/14] iio: accel: bma220: add debugfs reg access Petre Rodan
2025-09-10 7:57 ` [PATCH v2 14/14] iio: accel: bma220: add maintainer Petre Rodan
2025-09-10 18:18 ` [PATCH v2 00/14] iio: accel: bma220 improvements Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250910-bma220_improvements-v2-11-e23f4f2b9745@subdimension.ro \
--to=petre.rodan@subdimension.ro \
--cc=Jonathan.Cameron@huawei.com \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox