linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ariana Lazar <ariana.lazar@microchip.com>
To: "Jonathan Cameron" <jic23@kernel.org>,
	"David Lechner" <dlechner@baylibre.com>,
	"Nuno Sá" <nuno.sa@analog.com>,
	"Andy Shevchenko" <andy@kernel.org>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>
Cc: <linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	Ariana Lazar <ariana.lazar@microchip.com>
Subject: [PATCH 1/2] dt-bindings: iio: dac: adding support for Microchip MCP47FEB02
Date: Mon, 22 Sep 2025 14:30:53 +0300	[thread overview]
Message-ID: <20250922-mcp47feb02-v1-1-06cb4acaa347@microchip.com> (raw)
In-Reply-To: <20250922-mcp47feb02-v1-0-06cb4acaa347@microchip.com>

This is the device tree schema for iio driver for Microchip
MCP47F(E/V)B(0/1/2)1, MCP47F(E/V)B(0/1/2)2, MCP47F(E/V)B(0/1/2)4 and
MCP47F(E/V)B(0/1/2)8 series of buffered voltage output Digital-to-Analog
Converters with nonvolatile or volatile memory and an I2C Interface.

The families support up to 8 output channels.

The devices can be 8-bit, 10-bit and 12-bit.

Signed-off-by: Ariana Lazar <ariana.lazar@microchip.com>
---
 .../bindings/iio/dac/microchip,mcp47feb02.yaml     | 305 +++++++++++++++++++++
 MAINTAINERS                                        |   6 +
 2 files changed, 311 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/dac/microchip,mcp47feb02.yaml b/Documentation/devicetree/bindings/iio/dac/microchip,mcp47feb02.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..d05ddafa37540bc1f6b6ce65a466b95913925c10
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/microchip,mcp47feb02.yaml
@@ -0,0 +1,305 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/microchip,mcp47feb02.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP47F(E/V)B(0/1/2)(1/2/4/8) DAC with I2C Interface Families
+
+maintainers:
+  - Ariana Lazar <ariana.lazar@microchip.com>
+
+description: |
+  Datasheet for MCP47FEB01, MCP47FEB11, MCP47FEB21, MCP47FEB02, MCP47FEB12,
+  MCP47FEB22 can be found here:
+    https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/20005375A.pdf
+  Datasheet for MCP47FVBXX can be found here:
+    https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/20005405A.pdf
+  Datasheet for MCP47FEB04, MCP47FEB14, MCP47FEB24, MCP47FEB08, MCP47FEB18,
+  MCP47FEB28, MCP47FVB04, MCP47FVB14, MCP47FVB24, MCP47FVB08, MCP47FVB18,
+  MCP47FVB28 can be found here:
+    https://ww1.microchip.com/downloads/aemDocuments/documents/MSLD/ProductDocuments/DataSheets/MCP47FXBX48-Data-Sheet-DS200006368A.pdf
+
+  +------------+--------------+-------------+-------------+------------+
+  | Device     |  Resolution  |   Channels  | Vref number | Memory     |
+  |------------|--------------|-------------|-------------|------------|
+  | MCP47FEB01 |     8-bit    |      1      |      1      |   EEPROM   |
+  | MCP47FEB11 |    10-bit    |      1      |      1      |   EEPROM   |
+  | MCP47FEB21 |    12-bit    |      1      |      1      |   EEPROM   |
+  |------------|--------------|-------------|-------------|------------|
+  | MCP47FEB02 |     8-bit    |      2      |      1      |   EEPROM   |
+  | MCP47FEB12 |    10-bit    |      2      |      1      |   EEPROM   |
+  | MCP47FEB22 |    12-bit    |      2      |      1      |   EEPROM   |
+  |------------|--------------|-------------|-------------|------------|
+  | MCP47FVB01 |     8-bit    |      1      |      1      |      RAM   |
+  | MCP47FVB11 |    10-bit    |      1      |      1      |      RAM   |
+  | MCP47FVB21 |    12-bit    |      1      |      1      |      RAM   |
+  |------------|--------------|-------------|-------------|------------|
+  | MCP47FVB02 |     8-bit    |      2      |      1      |      RAM   |
+  | MCP47FVB12 |    10-bit    |      2      |      1      |      RAM   |
+  | MCP47FVB22 |    12-bit    |      2      |      1      |      RAM   |
+  |------------|--------------|-------------|-------------|------------|
+  | MCP47FVB04 |     8-bit    |      4      |      2      |      RAM   |
+  | MCP47FVB14 |    10-bit    |      4      |      2      |      RAM   |
+  | MCP47FVB24 |    12-bit    |      4      |      2      |      RAM   |
+  |------------|--------------|-------------|-------------|------------|
+  | MCP47FVB08 |     8-bit    |      8      |      2      |      RAM   |
+  | MCP47FVB18 |    10-bit    |      8      |      2      |      RAM   |
+  | MCP47FVB28 |    12-bit    |      8      |      2      |      RAM   |
+  |------------|--------------|-------------|-------------|------------|
+  | MCP47FEB04 |     8-bit    |      4      |      2      |   EEPROM   |
+  | MCP47FEB14 |    10-bit    |      4      |      2      |   EEPROM   |
+  | MCP47FEB24 |    12-bit    |      4      |      2      |   EEPROM   |
+  |------------|--------------|-------------|-------------|------------|
+  | MCP47FEB08 |     8-bit    |      8      |      2      |   EEPROM   |
+  | MCP47FEB18 |    10-bit    |      8      |      2      |   EEPROM   |
+  | MCP47FEB28 |    12-bit    |      8      |      2      |   EEPROM   |
+  +------------+--------------+-------------+-------------+------------+
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp47feb01
+      - microchip,mcp47feb11
+      - microchip,mcp47feb21
+      - microchip,mcp47feb02
+      - microchip,mcp47feb12
+      - microchip,mcp47feb22
+      - microchip,mcp47fvb01
+      - microchip,mcp47fvb11
+      - microchip,mcp47fvb21
+      - microchip,mcp47fvb02
+      - microchip,mcp47fvb12
+      - microchip,mcp47fvb22
+      - microchip,mcp47fvb04
+      - microchip,mcp47fvb14
+      - microchip,mcp47fvb24
+      - microchip,mcp47fvb08
+      - microchip,mcp47fvb18
+      - microchip,mcp47fvb28
+      - microchip,mcp47feb04
+      - microchip,mcp47feb14
+      - microchip,mcp47feb24
+      - microchip,mcp47feb08
+      - microchip,mcp47feb18
+      - microchip,mcp47feb28
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  vdd-supply:
+    description: |
+      Provides power and it will be used as the reference voltage if vref-supply
+      is not provided.
+
+  vref-supply:
+    description: |
+      Vref pin is used as a voltage reference when this supply is specified.
+      Into the datasheet it could be found as a Vref0.
+      If it does not exists the internal reference will be used.
+      This will be used as a reference voltage for the following outputs:
+        - for single-channel device: Vout0;
+        - for dual-channel device: Vout0, Vout1;
+        - for quad-channel device: Vout0, Vout2;
+        - for octal-channel device: Vout0, Vout2, Vout6, Vout8;
+
+  vref1-supply:
+    description: |
+      Vref1 pin is used as a voltage reference when this supply is specified.
+      If it does not exists the internal reference will be used.
+      This will be used as a reference voltage for the following outputs:
+        - for quad-channel device: Vout1, Vout3;
+        - for octal-channel device: Vout1, Vout3, Vout5, Vout7;
+
+  lat-gpios:
+    description: |
+      LAT pin to be used as a hardware trigger to synchronously update the DAC
+      channels and the pin is active Low. It could be also found as lat0 in
+      datasheet.
+    maxItems: 1
+
+  lat1-gpios:
+    description: |
+     LAT1 pin to be used as a hardware trigger to synchronously update the odd
+     DAC channels on devices with 4 and 8 channels. The pin is active Low.
+    maxItems: 1
+
+  microchip,vref-buffered:
+    type: boolean
+    description: |
+      Enable buffering of the external Vref/Vref0 pin in cases where the
+      external reference voltage does not have sufficient current capability in
+      order not to drop it’s voltage when connected to the internal resistor
+      ladder circuit.
+
+  microchip,vref1-buffered:
+    type: boolean
+    description: |
+      Enable buffering of the external Vref1 pin in cases where the external
+      reference voltage does not have sufficient current capability in order not
+      to drop it’s voltage when connected to the internal resistor ladder
+      circuit.
+
+  microchip,output-gain-2x:
+    type: boolean
+    description: |
+
+patternProperties:
+  "^channel@[0-7]$":
+    $ref: dac.yaml
+    type: object
+    description: Voltage output channel.
+
+    properties:
+      reg:
+        description: The channel number.
+        minimum: 1
+        maximum: 7
+
+      label:
+        description: Unique name to identify which channel this is.
+
+    required:
+      - reg
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,mcp47feb01
+              - microchip,mcp47feb11
+              - microchip,mcp47feb21
+              - microchip,mcp47fvb01
+              - microchip,mcp47fvb11
+              - microchip,mcp47fvb21
+    then:
+      properties:
+        lat-gpios: true
+        lat1-gpios: false
+        vref-supply: true
+        vref1-supply: false
+        microchip,vref-buffered: true
+        microchip,vref1-buffered: false
+      patternProperties:
+       "^channel@[1]$":
+        properties:
+         reg:
+          items:
+            maximum: 1
+        "^channel@[2-7]$": false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,mcp47feb02
+              - microchip,mcp47feb12
+              - microchip,mcp47feb22
+              - microchip,mcp47fvb02
+              - microchip,mcp47fvb12
+              - microchip,mcp47fvb22
+    then:
+      properties:
+        lat-gpios: true
+        lat1-gpios: false
+        vref-supply: true
+        vref1-supply: false
+        microchip,vref-buffered: true
+        microchip,vref1-buffered: false
+      patternProperties:
+       "^channel@[1-2]$":
+        properties:
+         reg:
+          items:
+            maximum: 1
+        "^channel@[3-7]$": false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,mcp47fvb04
+              - microchip,mcp47fvb14
+              - microchip,mcp47fvb24
+              - microchip,mcp47fvb08
+              - microchip,mcp47fvb18
+              - microchip,mcp47fvb28
+              - microchip,mcp47feb04
+              - microchip,mcp47feb14
+              - microchip,mcp47feb24
+              - microchip,mcp47feb08
+              - microchip,mcp47feb18
+              - microchip,mcp47feb28
+    then:
+      properties:
+        lat-gpios: true
+        lat1-gpios: true
+        vref-supply: true
+        vref1-supply: true
+        microchip,vref-buffered: true
+        microchip,vref1-buffered: true
+      patternProperties:
+       "^channel@[1-4]$":
+        properties:
+         reg:
+          items:
+            maximum: 1
+       "^channel@[5-7]$": false
+  - if:
+      not:
+        required:
+          - vref-supply
+    then:
+      properties:
+        microchip,vref-buffered: false
+  - if:
+      not:
+        required:
+          - vref1-supply
+    then:
+      properties:
+        microchip,vref1-buffered: false
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+          compatible = "microchip,mcp47feb02";
+          reg = <0>;
+          vdd-supply = <&vdac_vdd>;
+          vref-supply = <&vref_reg>;
+
+          #address-cells = <1>;
+          #size-cells = <0>;
+          channel@0 {
+            reg = <0>;
+            label = "DAC_OUTPUT_0";
+          };
+
+          channel@1 {
+            reg = <0x1>;
+            label = "DAC_OUTPUT_1";
+          };
+      };
+    };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index a92290fffa163f9fe8fe3f04bf66426f9a894409..6f51890cfc3081bc49c08fddc8af526c1ecc8d72 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14938,6 +14938,12 @@ F:	Documentation/ABI/testing/sysfs-bus-iio-potentiometer-mcp4531
 F:	drivers/iio/potentiometer/mcp4018.c
 F:	drivers/iio/potentiometer/mcp4531.c
 
+MCP47FEB02 MICROCHIP DAC DRIVER
+M:	Ariana Lazar <ariana.lazar@microchip.com>
+L:	linux-iio@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/iio/dac/microchip,mcp47feb02.yaml
+
 MCP4821 DAC DRIVER
 M:	Anshul Dalal <anshulusr@gmail.com>
 L:	linux-iio@vger.kernel.org

-- 
2.43.0


  reply	other threads:[~2025-09-22 11:31 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-22 11:30 [PATCH 0/2] Adding support for Microchip MCP47FEB02 Ariana Lazar
2025-09-22 11:30 ` Ariana Lazar [this message]
2025-09-22 16:38   ` [PATCH 1/2] dt-bindings: iio: dac: adding " Rob Herring (Arm)
2025-09-22 21:59   ` David Lechner
2025-09-27 17:00     ` Jonathan Cameron
2025-09-22 22:00   ` Rob Herring
2025-09-22 11:30 ` [PATCH 2/2] " Ariana Lazar
2025-09-22 20:10   ` Nuno Sá
2025-09-22 22:15     ` David Lechner
2025-09-23  8:21       ` Nuno Sá
2025-09-27 17:13         ` Jonathan Cameron
2025-09-29  5:44           ` Nuno Sá
2025-09-26 15:38   ` Dan Carpenter
2025-09-27 17:53   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250922-mcp47feb02-v1-1-06cb4acaa347@microchip.com \
    --to=ariana.lazar@microchip.com \
    --cc=andy@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=jic23@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nuno.sa@analog.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).