[PATCH v6 1/2] dt-bindings: iio: amplifiers: add adl8113

[Antoniu Miclaus <antoniu.miclaus@analog.com>]

Add devicetree bindings for adl8113.

Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
---
changes in v6:
 - Use items list for ctrl-gpios instead of minItems/maxItems
 - Simplify ctrl-gpios item descriptions (remove GPIO_ACTIVE_HIGH mentions)
 - Remove maxItems (implied by items list)

 .../bindings/iio/amplifiers/adi,adl8113.yaml  | 87 +++++++++++++++++++
 1 file changed, 87 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/amplifiers/adi,adl8113.yaml

diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,adl8113.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,adl8113.yaml
new file mode 100644
index 000000000000..28b3738cb675
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,adl8113.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/amplifiers/adi,adl8113.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADL8113 Low Noise Amplifier with integrated bypass switches
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+  The ADL8113 is a 10MHz to 12GHz Low Noise Amplifier with integrated bypass
+  switches controlled by two GPIO pins (VA and VB). The device supports four
+  operation modes:
+    - Internal Amplifier: VA=0, VB=0 - Signal passes through the internal LNA
+    - Internal Bypass: VA=1, VB=1 - Signal bypasses through internal path
+    - External Bypass A: VA=0, VB=1 - Signal routes from RFIN to OUT_A and from IN_A to RFOUT
+    - External Bypass B: VA=1, VB=0 - Signal routes from RFIN to OUT_B and from IN_B to RFOUT
+
+    https://www.analog.com/en/products/adl8113.html
+
+properties:
+  compatible:
+    const: adi,adl8113
+
+  vdd1-supply: true
+
+  vdd2-supply: true
+
+  vss2-supply: true
+
+  ctrl-gpios:
+    items:
+      - description: VA control pin
+      - description: VB control pin
+
+  adi,external-bypass-a-gain-db:
+    description:
+      Gain in dB of external amplifier connected to bypass path A (OUT_A/IN_A).
+      When specified, this gain value becomes selectable via the hardwaregain
+      attribute and automatically routes through the external A path.
+
+  adi,external-bypass-b-gain-db:
+    description:
+      Gain in dB of external amplifier connected to bypass path B (OUT_B/IN_B).
+      When specified, this gain value becomes selectable via the hardwaregain
+      attribute and automatically routes through the external B path.
+
+required:
+  - compatible
+  - ctrl-gpios
+  - vdd1-supply
+  - vdd2-supply
+  - vss2-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    /* Basic configuration with only internal paths */
+    amplifier {
+        compatible = "adi,adl8113";
+        ctrl-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>,
+                     <&gpio 23 GPIO_ACTIVE_HIGH>;
+        vdd1-supply = <&vdd1_5v>;
+        vdd2-supply = <&vdd2_3v3>;
+        vss2-supply = <&vss2_neg>;
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    /* Configuration with external bypass amplifiers */
+    amplifier {
+        compatible = "adi,adl8113";
+        ctrl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>,
+                     <&gpio 25 GPIO_ACTIVE_HIGH>;
+        vdd1-supply = <&vdd1_5v>;
+        vdd2-supply = <&vdd2_3v3>;
+        vss2-supply = <&vss2_neg>;
+        adi,external-bypass-a-gain-db = <20>;  /* 20dB external amp on path A */
+        adi,external-bypass-b-gain-db = <6>;   /* 6dB external amp on path B */
+    };
+...
-- 
2.43.0