[PATCH 2/2] iio: adc: ltc2309: add support for ltc2305

[Kyle Hsieh <kylehsieh1995@gmail.com>]

Add support for the 2-channel LTC2305 ADC in the existing LTC2309 driver.
The LTC2305 and LTC2309 share similar features: both are 12-bit,
low-noise, low-power SAR ADCs with an I2C interface.
The main difference is the number of channels: LTC2305 has 2 channels,
while LTC2309 has 8 channels.

Signed-off-by: Kyle Hsieh <kylehsieh1995@gmail.com>
---
 drivers/iio/adc/ltc2309.c | 50 +++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 46 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/adc/ltc2309.c b/drivers/iio/adc/ltc2309.c
index 5f0d947d0615..7a611ddd00d2 100644
--- a/drivers/iio/adc/ltc2309.c
+++ b/drivers/iio/adc/ltc2309.c
@@ -1,9 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
  * The LTC2309 is an 8-Channel, 12-Bit SAR ADC with an I2C Interface.
+ * The LTC2305 is a  2-Channel, 12-Bit SAR ADC with an I2C Interface.
  *
  * Datasheet:
  * https://www.analog.com/media/en/technical-documentation/data-sheets/2309fd.pdf
+ * https://www.analog.com/media/en/technical-documentation/data-sheets/23015fb.pdf
  *
  * Copyright (c) 2023, Liam Beguin <liambeguin@gmail.com>
  */
@@ -60,6 +62,13 @@ enum ltc2309_channels {
 	LTC2309_CH7,
 };
 
+enum ltc2305_channels {
+	LTC2305_CH0_CH1 = 0,
+	LTC2305_CH1_CH0,
+	LTC2305_CH0,
+	LTC2305_CH1,
+};
+
 #define LTC2309_CHAN(_chan, _addr) {				\
 	.type = IIO_VOLTAGE,					\
 	.indexed = 1,						\
@@ -99,6 +108,31 @@ static const struct iio_chan_spec ltc2309_channels[] = {
 	LTC2309_DIFF_CHAN(7, 6, LTC2309_CH7_CH6),
 };
 
+static const struct iio_chan_spec ltc2305_channels[] = {
+	LTC2309_CHAN(0, LTC2305_CH0),
+	LTC2309_CHAN(1, LTC2305_CH1),
+	LTC2309_DIFF_CHAN(0, 1, LTC2305_CH0_CH1),
+	LTC2309_DIFF_CHAN(1, 0, LTC2305_CH1_CH0),
+};
+
+struct ltc230x_chip_info {
+	const char *name;
+	const struct iio_chan_spec *channels;
+	int num_channels;
+};
+
+static const struct ltc230x_chip_info ltc2309_chip_info = {
+	.name = "ltc2309",
+	.channels = ltc2309_channels,
+	.num_channels = ARRAY_SIZE(ltc2309_channels),
+};
+
+static const struct ltc230x_chip_info ltc2305_chip_info = {
+	.name = "ltc2305",
+	.channels = ltc2305_channels,
+	.num_channels = ARRAY_SIZE(ltc2305_channels),
+};
+
 static int ltc2309_read_raw_channel(struct ltc2309 *ltc2309,
 				    unsigned long address, int *val)
 {
@@ -158,6 +192,8 @@ static const struct iio_info ltc2309_info = {
 
 static int ltc2309_probe(struct i2c_client *client)
 {
+	const struct of_device_id *match;
+	const struct ltc230x_chip_info *chip_info;
 	struct iio_dev *indio_dev;
 	struct ltc2309 *ltc2309;
 	int ret;
@@ -167,13 +203,17 @@ static int ltc2309_probe(struct i2c_client *client)
 		return -ENOMEM;
 
 	ltc2309 = iio_priv(indio_dev);
+	chip_info = device_get_match_data(&client->dev);
+	if (!chip_info)
+		return -EINVAL;
+
 	ltc2309->dev = &indio_dev->dev;
 	ltc2309->client = client;
 
-	indio_dev->name = "ltc2309";
+	indio_dev->name = chip_info->name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
-	indio_dev->channels = ltc2309_channels;
-	indio_dev->num_channels = ARRAY_SIZE(ltc2309_channels);
+	indio_dev->channels = chip_info->channels;
+	indio_dev->num_channels = chip_info->num_channels;
 	indio_dev->info = &ltc2309_info;
 
 	ret = devm_regulator_get_enable_read_voltage(&client->dev, "vref");
@@ -189,13 +229,15 @@ static int ltc2309_probe(struct i2c_client *client)
 }
 
 static const struct of_device_id ltc2309_of_match[] = {
-	{ .compatible = "lltc,ltc2309" },
+	{ .compatible = "lltc,ltc2309", .data = &ltc2309_chip_info },
+	{ .compatible = "lltc,ltc2305", .data = &ltc2305_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ltc2309_of_match);
 
 static const struct i2c_device_id ltc2309_id[] = {
 	{ "ltc2309" },
+	{ "ltc2305" },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, ltc2309_id);

-- 
2.34.1