[PATCH v4 4/8] iio: accel: mma8452: convert to guard(mutex)

[Rajveer Chaudhari <rajveer.chaudhari.linux@gmail.com>]

Replace manual mutex_lock/mutex_unlock pair with guard(mutex) in
mma8452_change_config(). This ensures the mutex is
released on all return paths and allows returning directly
without a goto label.

Signed-off-by: Rajveer Chaudhari <rajveer.chaudhari.linux@gmail.com>
---
v4: No changes

v3 : No changes

v2 : Dropped Header alignment change
---
 drivers/iio/accel/mma8452.c | 20 +++++++-------------
 1 file changed, 7 insertions(+), 13 deletions(-)

diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 79ee4dff0ff6..16d9124b844c 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -599,36 +599,30 @@ static int mma8452_change_config(struct mma8452_data *data, u8 reg, u8 val)
 	int ret;
 	int is_active;
 
-	mutex_lock(&data->lock);
+	guard(mutex)(&data->lock);
 
 	is_active = mma8452_is_active(data);
-	if (is_active < 0) {
-		ret = is_active;
-		goto fail;
-	}
+	if (is_active < 0)
+		return is_active;
 
 	/* config can only be changed when in standby */
 	if (is_active > 0) {
 		ret = mma8452_standby(data);
 		if (ret < 0)
-			goto fail;
+			return ret;
 	}
 
 	ret = i2c_smbus_write_byte_data(data->client, reg, val);
 	if (ret < 0)
-		goto fail;
+		return ret;
 
 	if (is_active > 0) {
 		ret = mma8452_active(data);
 		if (ret < 0)
-			goto fail;
+			return ret;
 	}
 
-	ret = 0;
-fail:
-	mutex_unlock(&data->lock);
-
-	return ret;
+	return 0;
 }
 
 static int mma8452_set_power_mode(struct mma8452_data *data, u8 mode)
-- 
2.53.0