* [PULL] IIO: new device support, features and cleanup for the 7.1 cycle.
@ 2026-03-29 12:04 Jonathan Cameron
2026-03-29 12:41 ` Greg KH
2026-03-29 12:49 ` Greg KH
0 siblings, 2 replies; 3+ messages in thread
From: Jonathan Cameron @ 2026-03-29 12:04 UTC (permalink / raw)
To: gregkh, linux-iio
The following changes since commit f338e77383789c0cae23ca3d48adcc5e9e137e3c:
Linux 7.0-rc4 (2026-03-15 13:52:05 -0700)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-7.1a
for you to fetch changes up to d2a4ec19d2a2e54c23b5180e939994d3da4a6b91:
Docs: iio: ad7191 Correct clock configuration (2026-03-27 07:31:19 +0000)
----------------------------------------------------------------
IIO: New devices support, features and cleanup for 7.1
Includes merge of v7.0-rc4 to pull in a fix and a merge of
ib-iio-thermal-qcom-pmic5 immutable branch (provided from the IIO tree so
thermal could also pick this up and add thermal specific remainder
of the series on top.
New device support
------------------
adi,ad4030
- Add support for ADA4316 and ADAQ4224 ADCs with PGAs.
adi,ad4080
- Add support for AD4082, AD4085 and AD4088 ADCs.
adi,ad8366
- Add ADRF5702 and ADRF5703 digital step attenuators.
adi,adxl372
- Add support for the ADXL371 accelerometer after refactors to allow multiple
device variants to be supported by the driver. In particular a silicon
issue means the hardware FIFO doesn't work on the ADXL371
bosch,bma255/bmg160
- Add support for BMX055 gyroscope and magnetometer (effectively separate
devices from point of view of interface).
lltc,ltc2309
- Add support for LTC2305 2 channel 12-bit ADC.
lltc,ltc2532
- Add support for 4 variants of the LTC2654 quad DAC.
maxim,ds4424
- Add IDs for DS4402 and DS4404 parts. Initially patch is ID only but additional
features also added that are device dependent.
qcom,spmi-adc-gen3
- New driver supporting this generation of Qualcomm's SoC ADC.
st,vl53l1
- New driver for this Time Of Flight (TOF) sensor.
ti,ina2xx
- Support the INA236 digital power monitor.
vishay,vcnl4000
- Add support for CM36686 ambient light and proximity sensor.
- Add support for CM36672P proximity sensors.
ID only additions.
amlogic,meson-adc
- Support the Meson S4.
Features
--------
iio-backend framework
- Add capability discovery so front end drivers can know what features are
available from the backend and adjust how they operate.
adi,ad4030
- Add SPI offload support requiring a non trivial PWM setup.
adi,ad7380
- Add support for multiple SPI lanes to improve throughput.
adi,ad7768-1
- Support SPI offload and always use continuous mode, enabling more
filter options.
adi,ad8366
- Device tree bindings and support.
aspeed,adc
- Handle battery channel.
maxim,ds4424
- Add external resistor controlled scale and per-variant limits.
- Handle per variant range limits.
- Move it to regmap.
motorola,cpcap-adc
- Support for the ADC found on the Motorola Mot board. Effectively some board
specific configuration handled in the driver.
vishay,vcnl4000
- Support explicit power supply regulators.
tyhx,hx9023s
- Allow device tree specification of firmware file name.
Cleanup and minor fixes
-----------------------
treewide
- Remove a bunch of unused structure elements.
- Replaces standard fixed width integers with kernel types.
- Replace some other error values that were returned on allocation failure
with -ENOMEM
iio-core
- Replace a few custom devm implementations for devm_add_action_or_reset()
iio-trigger
- Use put_device() to cleanup on error.
iio-backend
- Use __free(fwmode_handle) to simplify some code.
hw-consumer
- Use separate allocation for scan mask bitmap to simplify code.
acpi-als
- Switch from ACPI driver to platform driver.
adi,ad4030
- Use BIT() to replace values that are always a power of 2 to slightly
improve readability.
adi,ad4062
- Add a missing check for error form iio_get_current_scan_type()
adi,ad5933
- Use div64_ul() rather than do_div() as remainder was not used.
adi,ad7191
- Documentation fixes related to clocks
adi,ad7816
- Use sysfs_emit()
adi,ad8366
- General driver modernization
adi,adf4350
- Change a TOOD to NOTE in a comment to avoid anyone from walking into
a tricky to improve corner case.
adi,admv1013
- Avoid a null pointer dereference if device_property_read_string() fails.
adi,admv4420
- Return error code rather than -1..
adi,adxl345
- Add separate scaling for events from that of raw channels.
amlogic,meson-adc
- Don't bother keeping nvmem cell access around when only used in probe.
atmel,at91-sama5d
- Don't bother keeping nvmem cell access around when only used in probe.
bosch,bmc150
- Use sysfs_emit() in a few places.
honeywell,hsc030pa
- Improve handling of return values from i2c_transfer.
liteon,ltr501
- Return error values rather than -1 replaced by -EINVAL at higher
levels of the callstack.
maxim,ds4424
- A bunch of general minor improvements prior to adding new features.
maxim,max11410
- Make some const string arrays static.
maxim,max5522
- Use devm_regulator_get_enable_read_voltage() at probe to cache the
voltage rather than keeping the regulator around to access and query
later.
vishay,vcnl4000
- Various code improvements.
sharp,gp2ap020a00f
- General driver modernization.
silabs,si7210
- Use devm_regulator_get_enable_read_voltage() at probe to cache the
voltage rather than keeping the regulator around to access and query
later.
st,lsm6dsx
- Add SMOCF00 ACPI ID seen on products by SHIFT.
st,st_sensors
- Fix up various kernel-doc issues.
- Avoid kmalloc of a single use buffer and instead reused existing
buffer_data.
taos,tsl2772
- Fix some kernel-doc warnings due to missing :
ti,ads7950
- Use iio_push_to_buffers_with_ts_unaligned() as first few elements of
array are not the data that is pushed.
- Move from array of chip_info structures to individual named ones. This
is part of slowly replacing use of a code pattern that we don't want
replicated in new drivers.
vti,sca3000
- General driver modernization included use of devm and guard().
Various other more minor stuff not called out explicitly.
Includes things like typo fixes, use of dev_err_probe() and local
variables to avoid repeated dereferencing of the same member as well as
increasing use of guard() to simplify release of locks.
Another slow improvement to code quality is both standardizing on
header order and ensure all appropriate headers are included.
----------------------------------------------------------------
Ammar Mustafa (1):
Docs: iio: ad7191 Correct clock configuration
Andy Shevchenko (10):
iio: adc: ad7192: Revert "properly check spi_get_device_match_data()"
iio: core: Simplify IIO core managed APIs
iio: light: gp2ap020a00f: Use correct types for 16-bit LE data
iio: light: gp2ap020a00f: Return directly from the switch cases
iio: light: gp2ap020a00f: Replace custom implementation of min()
iio: light: gp2ap020a00f: Use temporary variable for struct device
iio: light: gp2ap020a00f: Explicitly use string literal for driver name
iio: light: gp2ap020a00f: Remove trailing comma in termination entry
iio: light: gp2ap020a00f: Join some lines of code to be a single line
iio: imu: inv_icm42600: Convert to uXX and sXX integer types
Antoniu Miclaus (50):
iio: adc: pac1934: Return -ENOMEM on memory allocation failure
iio: frequency: adf4350: Return -ENOMEM on memory allocation failure
iio: magnetometer: si7210: simplify probe with devm_regulator_get_enable_read_voltage()
iio: dac: max5522: simplify probe with devm_regulator_get_enable_read_voltage()
dt-bindings: iio: adc: adi,ad4080: add support for AD4082, AD4085 and AD4088
iio: adc: ad4080: add support for AD4082, AD4085 and AD4088
iio: filter: admv8818: remove redundant else after return
iio: adc: ad7266: simplify error return
iio: adc: ade9000: use dev_err_probe() in probe path
iio: adc: at91_adc: change at91_ts_sample to return void
iio: addac: ad74413r: simplify timeout return
iio: frequency: adrf6780: add dev variable
iio: frequency: adrf6780: use dev_err_probe()
iio: frequency: admv1014: add dev variable
iio: frequency: admv1014: use dev_err_probe()
iio: frequency: admv1013: add dev variable
iio: frequency: admv1013: use dev_err_probe()
iio: frequency: adf4377: add dev variable
iio: frequency: adf4377: use dev_err_probe()
iio: dac: ad7293: add dev variable
iio: dac: ad7293: use dev_err_probe()
iio: filter: admv8818: add dev variable
iio: filter: admv8818: use dev_err_probe()
iio: frequency: admv4420: return proper error code from admv4420_calc_parameters()
MAINTAINERS: add entry for ADL8113 driver
iio: pressure: hsc030pa: Improve i2c_transfer return value handling
iio: adc: ad4080: remove unused dec_rate field
iio: adc: ad7768-1: remove unused mclk_div field
iio: adc: ad7793: remove unused int_vref_mv field
iio: adc: ad9467: remove unused output_mode field
iio: adc: max1363: remove unused requestedmask field
iio: adc: nau7802: remove unused min_conversions field
iio: adc: ti-ads1015: remove unused enabled field
iio: dac: adi-axi-dac: remove unused int_tone field
iio: dac: ti-dac5571: remove unused id field
iio: humidity: hdc2010: remove unused interrupt_config
iio: imu: bmi323: remove unused drdy_trigger_enabled
iio: light: apds9306: remove unused nlux_per_count
iio: light: gp2ap020a00f: remove unused debug_reg_addr
iio: light: ltr501: return proper error code from ltr501_get_gain_index()
iio: frequency: admv1013: fix NULL pointer dereference on str
iio: accel: adxl372: introduce chip_info structure
dt-bindings: iio: accel: adi,adxl372: add ADXL371 compatible
iio: accel: adxl372: factor out buffer and trigger setup
iio: accel: adxl372: add support for ADXL371
iio: backend: use __free(fwnode_handle) for automatic cleanup
iio: frequency: admv4420: add dev variable
iio: frequency: admv4420: use dev_err_probe
iio: frequency: ad9523: add dev variable
iio: frequency: ad9523: use dev_err_probe
Archit Anant (1):
staging: iio: impedance-analyzer: ad5933: use div64_ul() instead of do_div()
Bhargav Joshi (4):
iio: frequency: ad9523: fix implicit variable macros
iio: frequency: ad9523: fix multi-line dereferences
iio: frequency: ad9523: use octal permissions
iio: hid-sensor-gyro-3d: fix typo in array name
Billy Tsai (4):
iio: adc: Add battery channel definition for ADC
iio: adc: Enable multiple consecutive channels based on model data
iio: adc: aspeed: Replace mdelay() with fsleep() for ADC stabilization delay
iio: adc: aspeed: Reserve battery sensing channel for on-demand use
Bruno Martins (1):
staging: iio: ad7816: Replace sprintf() with sysfs_emit()
Chuang Zhu (1):
iio: adc: ina2xx: add INA236 support
Cosmin Tanislav (1):
iio: ABI: fix current_trigger description
David Jander (1):
iio: dac: ds4424: add DS4402/DS4404 device IDs
David Lechner (5):
dt-bindings: iio: adc: adi,ad7380: add spi-rx-bus-width property
iio: adc: ad7380: add support for multiple SPI lanes
iio: adc: ti-ads7950: remove chip_info[]
iio: light: as73211: remove duplicate zero init of scan.chan[3]
iio: adc: ti-ads7950: use iio_push_to_buffers_with_ts_unaligned()
David Marinovic (3):
iio: dac: ltc2632: drop enum and use individual chip_info objects
dt-bindings: iio: dac: ltc2632: add LTC2654 compatible strings
iio: dac: ltc2632: add support for LTC2654 DAC family
Erikas Bitovtas (10):
dt-bindings: iio: light: vcnl4000: add Capella CM36686 and CM36672P
iio: light: vcnl4000: add support for Capella CM36686 and CM36672P
dt-bindings: iio: light: vcnl4000: add regulators
iio: light: vcnl4000: sort includes by their name
iio: light: vcnl4000: move power enablement from init to probe
iio: light: vcnl4000: replace mutex_init() with devm_mutex_init()
iio: light: vcnl4000: remove error messages for trigger and irq
iio: light: vcnl4000: use variables for I2C client and device instances
iio: light: vcnl4000: remove redundant check for proximity-near-level
iio: light: vcnl4000: add support for regulators
Ethan Tidmore (4):
iio: adc: ad4062: Add missing IS_ERR() check
iio: light: gp2ap020a00f: simplify locking with guard()
iio: light: gp2ap020a00f: correct return type to int
iio: light: gp2ap020a00f: Fix possible error swallow
Felix Gu (2):
iio: adc: nxp-sar-adc: Remove unnecessary type casting
iio: adc: ti-ads1119: Drop redundant error message
Gabriel Almeida (2):
iio: light: zopt2201: Reorder header includes
iio: light: zopt2201: use lock guards
Gabriel Rondon (3):
staging: iio: ad5933: use sysfs_emit() in show functions
staging: iio: ad9834: use sysfs_emit() and simplify show functions
iio: accel: bmc150-accel-core: use sysfs_emit() in show functions
Giorgi Tchankvetadze (9):
iio: adc: ad7173: move opening brace to a separate line
iio: adc: ade9000: remove unused AD9000_CHANNELS_PER_PHASE macro
iio: adc: fix typos found by codespell
iio: adc: ade9000: remove unused ADE9000_ST_ERROR macro
iio: adc: max1363: Reformat enum and array initializers
iio: adc: palmas_gpadc: Replace leading space indentation with tabs
iio: adc: mt6359-auxadc: Fix comma spacing
iio: adc: ad_sigma_delta: Format block comments
iio: adc: max11410: make vref register name arrays static const
Harshit Mogalapalli (8):
iio: sca3000: simplify with spi_get_device_match_data()
iio: sca3000: reuse device pointer for devm helpers
iio: sca3000: switch IRQ handling to devm helpers
iio: sca3000: Move sca3000_stop_all_interrupts() above sca3000_probe()
iio: sca3000: make stop_all_interrupts() return void
iio: sca3000: use guard(mutex) to simplify return paths
iio: sca3000: stop interrupts via devm_add_action_or_reset()
iio: sca3000: manage device registration with devm helper
Jishnu Prakash (3):
dt-bindings: iio: adc: Split out QCOM VADC channel properties
dt-bindings: iio: adc: Add support for QCOM PMIC5 Gen3 ADC
iio: adc: Add support for QCOM PMIC5 Gen3 ADC
Jonathan Cameron (2):
Merge branch 'ib-iio-thermal-qcom-pmic5' into togreg Immutable branch to allow this base work to be merged into thermal.
Merge tag 'v7.0-rc4' into togreg
Jonathan Santos (4):
iio: adc: ad7768-1: fix one-shot mode data acquisition
iio: adc: ad7768-1: remove switch to one-shot mode
iio: adc: ad7768-1: disable IRQ autoenable
iio: adc: ad7768-1: add support for SPI offload
Jun Yan (3):
dt-bindings: iio: accel: bosch,bma255: add bmx055 accel binding
dt-bindings: iio: magnetometer: bosch,bmc150_magn: add bmx055 magnetometer binding
dt-bindings: iio: gyroscope: bosch,bmg160: add bmx055 gyroscope binding
Kyle Hsieh (3):
dt-bindings: adc: ltc2497: add support for ltc2305
iio: adc: ltc2309: explicitly assign hex values to channel enums
iio: adc: ltc2309: add support for ltc2305
Marcelo Schmitt (7):
dt-bindings: iio: adc: adi,ad4030: Reference spi-peripheral-props
iio: adc: ad4030: Use BIT macro to improve code readability
Docs: iio: ad4030: Add double PWM SPI offload doc
dt-bindings: iio: adc: adi,ad4030: Add PWM
iio: adc: ad4030: Add SPI offload support
dt-bindings: iio: adc: adi,ad4030: Add ADAQ4216 and ADAQ4224
iio: adc: ad4030: Add support for ADAQ4216 and ADAQ4224
Menderes Sabaz (1):
iio: dac: ad5360: converting to guard(mutex)
Milan Misic (1):
iio: imu: st_lsm6dsx: Add ACPI ID for SHIFT13mi gyroscope
Neel Bullywon (4):
iio: magnetometer: bmc150_magn: replace msleep with fsleep
iio: magnetometer: bmc150_magn: minor formatting cleanup
iio: magnetometer: bmc150_magn: use automated cleanup for mutex
iio: frequency: adf4350: replace TODO with NOTE in adf4350_set_freq()
Nick Xie (2):
dt-bindings: iio: adc: amlogic,meson-saradc: add S4 compatible
iio: adc: meson-saradc: add support for Meson S4
Nikhil Gautam (1):
iio: accel: adxl380: fix typo in PART_ID register macro
Nuno Sá (1):
iio: buffer: hw-consumer: remove redundant scan_mask flexible array
Oleksij Rempel (11):
iio: dac: ds4424: refactor raw access to use bitwise operations
iio: dac: ds4424: ratelimit read errors and use device context
iio: dac: ds4424: sort headers alphabetically
iio: dac: ds4424: rename iio_info struct to avoid ambiguity
iio: dac: ds4424: use device match data for chip info
iio: dac: ds4424: use fsleep() instead of usleep_range()
dt-bindings: iio: dac: maxim,ds4424: add ds4402/ds4404
iio: dac: ds4424: support per-variant output range limits
iio: dac: ds4424: convert to regmap
dt-bindings: iio: dac: maxim,ds4424: add maxim,rfs-ohms property
iio: dac: ds4424: add Rfs-based scale and per-variant limits
Pranav Kharche (1):
dt-bindings: iio: dac: Fix typo in ti,dac7612.yaml
Rafael J. Wysocki (2):
iio: light: acpi-als: Register ACPI notify handler directly
iio: light: acpi-als: Convert ACPI driver to a platform one
Rajveer Chaudhari (2):
iio: accel: adxl313: convert to guard(mutex)
iio: accel: adxl372: convert to guard(mutex)
Randy Dunlap (2):
iio: tsl2772: fix all kernel-doc warnings
iio: st_sensors: correct kernel-doc issues
Rodrigo Alencar (13):
MAINTAINERS: Add missing maintainer entry for AD8366 driver
dt-bindings: iio: amplifiers: Add AD8366 support
iio: amplifiers: ad8366: refactor include headers
iio: amplifiers: ad8366: add local dev pointer to the probe function
iio: amplifiers: ad8366: use devm_mutex_init() and drop mutex_init()
iio: amplifiers: ad8366: refactor device resource management
iio: amplifiers: ad8366: replace reset-gpio with reset controller
iio: amplifiers: ad8366: prepare for device-tree support
iio: amplifiers: ad8366: add device tree support
iio: amplifiers: ad8366: consume enable gpio
iio: amplifiers: ad8366: update device support
dt-bindings: iio: amplifiers: ad8366: add adrf5702/3 support
iio: amplifiers: ad8366: add support for adrf5702/3
Rosen Penev (2):
iio: adc: at91-sama5d2_adc: no devm for nvmem_cell_get
iio: adc: meson: no devm for nvmem_cell_get
SAJJA EASWAR SAI (1):
iio: light: apds9306: remove redundant explicit pointer cast
Salah Triki (1):
iio: core: Clean up device correctly on viio_trigger_alloc() failure
Sanjay Chitroda (1):
iio: st_sensors: drop temporary kmalloc buffer and reuse buffer_data
Shi Hao (14):
iio: accel: fix typo celcius to Celsius
iio: light: fix several incorrect spellings
iio: adc: add an article and use digitize instead of digitalize
iio: imu: fix typo from adjustement to adjustment
iio: magnetometer: fix various spelling mistakes
iio: pressure: fix spelling mistakes in comments
iio: proximity: fix typo from currenly to currently
iio: resolver: fix typo from degredation to degradation
iio: temp: fix spelling mistakes in comments
iio: test: fix typo from neeeds to needs in comment
iio: common: fix spelling mistakes in comments
iio: chemical: rephrase comment and fix a typo
iio: cdc: fix spelling mistakes in comments
iio: amplifiers: fix typo from Curren to Current
Siratul Islam (2):
dt-bindings: iio: proximity: add ST VL53L1X ToF sensor
iio: proximity: add driver for ST VL53L1X ToF sensor
Svyatoslav Ryhel (2):
dt-bindings: iio: adc: cpcap-adc: document Mot ADC
iio: adc: cpcap-adc: add support for Mot ADC
Taha Ed-Dafili (5):
docs: iio: adxl345: grammar and formatting cleanups
iio: core: Add IIO_EV_INFO_SCALE to event info
iio: accel: adxl345: Expose IIO_EV_INFO_VALUE for double tap
iio: accel: adxl345: Implement event scaling for ABI compliance
docs: iio: adxl345: update event attributes and scaling math
Tomas Melin (6):
iio: industrialio-backend: support backend capabilities
iio: adc: adi-axi-adc: define supported iio-backend capabilities
iio: dac: adi-axi-dac: define supported iio-backend capabilities
iio: adc: sd_adc_modulator: define supported iio-backend capabilities
iio: adc: ad9467: simplify device pointer in probe
iio: adc: ad9467: check for backend capabilities
Yasin Lee (2):
dt-bindings: iio: proximity: hx9023s: support firmware-name property
iio: proximity: hx9023s: support firmware-name property
Documentation/ABI/testing/sysfs-bus-iio | 2 +-
.../devicetree/bindings/iio/accel/adi,adxl372.yaml | 9 +-
.../bindings/iio/accel/bosch,bma255.yaml | 40 +-
.../devicetree/bindings/iio/adc/adi,ad4030.yaml | 64 ++
.../devicetree/bindings/iio/adc/adi,ad4080.yaml | 3 +
.../devicetree/bindings/iio/adc/adi,ad7380.yaml | 23 +
.../bindings/iio/adc/amlogic,meson-saradc.yaml | 4 +
.../devicetree/bindings/iio/adc/lltc,ltc2497.yaml | 7 +
.../bindings/iio/adc/motorola,cpcap-adc.yaml | 1 +
.../bindings/iio/adc/qcom,spmi-adc5-gen3.yaml | 151 ++++
.../bindings/iio/adc/qcom,spmi-vadc-common.yaml | 84 ++
.../bindings/iio/adc/qcom,spmi-vadc.yaml | 78 +-
.../bindings/iio/amplifiers/adi,ad8366.yaml | 101 +++
.../devicetree/bindings/iio/dac/lltc,ltc2632.yaml | 57 +-
.../devicetree/bindings/iio/dac/maxim,ds4424.yaml | 42 +-
.../devicetree/bindings/iio/dac/ti,dac7612.yaml | 2 +-
.../bindings/iio/gyroscope/bosch,bmg160.yaml | 12 +-
.../bindings/iio/light/vishay,vcnl4000.yaml | 31 +-
.../iio/magnetometer/bosch,bmc150_magn.yaml | 14 +-
.../bindings/iio/proximity/st,vl53l0x.yaml | 22 +-
.../bindings/iio/proximity/tyhx,hx9023s.yaml | 4 +
.../devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 1 +
Documentation/iio/ad4030.rst | 39 +
Documentation/iio/ad7191.rst | 6 +-
Documentation/iio/adxl345.rst | 81 +-
MAINTAINERS | 29 +-
drivers/iio/accel/Kconfig | 12 +-
drivers/iio/accel/adis16201.c | 2 +-
drivers/iio/accel/adis16209.c | 2 +-
drivers/iio/accel/adxl313_core.c | 11 +-
drivers/iio/accel/adxl345_core.c | 32 +-
drivers/iio/accel/adxl372.c | 314 +++++---
drivers/iio/accel/adxl372.h | 20 +-
drivers/iio/accel/adxl372_i2c.c | 17 +-
drivers/iio/accel/adxl372_spi.c | 17 +-
drivers/iio/accel/adxl380.c | 4 +-
drivers/iio/accel/bmc150-accel-core.c | 4 +-
drivers/iio/accel/sca3000.c | 215 +++---
drivers/iio/adc/Kconfig | 33 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/ad4030.c | 618 ++++++++++++++-
drivers/iio/adc/ad4062.c | 12 +-
drivers/iio/adc/ad4080.c | 46 +-
drivers/iio/adc/ad4170-4.c | 6 +-
drivers/iio/adc/ad7173.c | 3 +-
drivers/iio/adc/ad7192.c | 3 -
drivers/iio/adc/ad7266.c | 6 +-
drivers/iio/adc/ad7380.c | 53 +-
drivers/iio/adc/ad7768-1.c | 221 +++++-
drivers/iio/adc/ad7793.c | 3 +-
drivers/iio/adc/ad7887.c | 2 +-
drivers/iio/adc/ad7923.c | 4 +-
drivers/iio/adc/ad9467.c | 95 ++-
drivers/iio/adc/ad_sigma_delta.c | 6 +-
drivers/iio/adc/ade9000.c | 13 +-
drivers/iio/adc/adi-axi-adc.c | 5 +
drivers/iio/adc/aspeed_adc.c | 72 +-
drivers/iio/adc/at91-sama5d2_adc.c | 5 +-
drivers/iio/adc/at91_adc.c | 12 +-
drivers/iio/adc/cpcap-adc.c | 15 +
drivers/iio/adc/fsl-imx25-gcq.c | 2 +-
drivers/iio/adc/ina2xx-adc.c | 65 +-
drivers/iio/adc/ltc2309.c | 81 +-
drivers/iio/adc/max11410.c | 4 +-
drivers/iio/adc/max1363.c | 87 +--
drivers/iio/adc/mcp3564.c | 2 +-
drivers/iio/adc/men_z188_adc.c | 2 +-
drivers/iio/adc/meson_saradc.c | 21 +-
drivers/iio/adc/mt6359-auxadc.c | 2 +-
drivers/iio/adc/nau7802.c | 3 +-
drivers/iio/adc/npcm_adc.c | 2 +-
drivers/iio/adc/nxp-sar-adc.c | 3 +-
drivers/iio/adc/pac1921.c | 2 +-
drivers/iio/adc/pac1934.c | 2 +-
drivers/iio/adc/palmas_gpadc.c | 8 +-
drivers/iio/adc/qcom-spmi-adc5-gen3.c | 860 +++++++++++++++++++++
drivers/iio/adc/rohm-bd79124.c | 4 +-
drivers/iio/adc/sd_adc_modulator.c | 1 +
drivers/iio/adc/spear_adc.c | 2 +-
drivers/iio/adc/stm32-adc-core.c | 2 +-
drivers/iio/adc/stm32-adc.c | 2 +-
drivers/iio/adc/sun20i-gpadc-iio.c | 2 +-
drivers/iio/adc/ti-ads1015.c | 1 -
drivers/iio/adc/ti-ads1119.c | 3 +-
drivers/iio/adc/ti-ads7950.c | 183 +++--
drivers/iio/adc/ti_am335x_adc.c | 6 +-
drivers/iio/adc/twl4030-madc.c | 2 +-
drivers/iio/adc/twl6030-gpadc.c | 2 +-
drivers/iio/addac/ad74413r.c | 9 +-
drivers/iio/amplifiers/Kconfig | 8 +
drivers/iio/amplifiers/ad8366.c | 405 +++++-----
drivers/iio/amplifiers/ada4250.c | 2 +-
drivers/iio/buffer/industrialio-hw-consumer.c | 11 +-
drivers/iio/buffer/kfifo_buf.c | 41 +-
drivers/iio/cdc/ad7150.c | 2 +-
drivers/iio/cdc/ad7746.c | 2 +-
drivers/iio/chemical/bme680_core.c | 2 +-
.../iio/common/cros_ec_sensors/cros_ec_sensors.c | 2 +-
.../iio/common/hid-sensors/hid-sensor-attributes.c | 2 +-
.../iio/common/inv_sensors/inv_sensors_timestamp.c | 4 +-
drivers/iio/common/ms_sensors/ms_sensors_i2c.c | 2 +-
drivers/iio/common/st_sensors/st_sensors_core.c | 11 +-
drivers/iio/dac/Kconfig | 1 +
drivers/iio/dac/ad5360.c | 29 +-
drivers/iio/dac/ad7293.c | 31 +-
drivers/iio/dac/adi-axi-dac.c | 3 +-
drivers/iio/dac/ds4424.c | 373 ++++++---
drivers/iio/dac/ltc2632.c | 353 ++++-----
drivers/iio/dac/max5522.c | 22 +-
drivers/iio/dac/ti-dac5571.c | 1 -
drivers/iio/filter/admv8818.c | 60 +-
drivers/iio/frequency/ad9523.c | 110 ++-
drivers/iio/frequency/adf4350.c | 10 +-
drivers/iio/frequency/adf4377.c | 56 +-
drivers/iio/frequency/admv1013.c | 104 +--
drivers/iio/frequency/admv1014.c | 89 +--
drivers/iio/frequency/admv4420.c | 37 +-
drivers/iio/frequency/adrf6780.c | 60 +-
drivers/iio/gyro/hid-sensor-gyro-3d.c | 6 +-
drivers/iio/humidity/hdc2010.c | 1 -
drivers/iio/imu/bmi323/bmi323_core.c | 1 -
drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c | 2 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c | 2 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 1 +
drivers/iio/industrialio-backend.c | 22 +-
drivers/iio/industrialio-event.c | 1 +
drivers/iio/industrialio-trigger.c | 33 +-
drivers/iio/light/Kconfig | 2 +-
drivers/iio/light/acpi-als.c | 42 +-
drivers/iio/light/apds9160.c | 2 +-
drivers/iio/light/apds9306.c | 4 +-
drivers/iio/light/as73211.c | 3 -
drivers/iio/light/gp2ap020a00f.c | 310 +++-----
drivers/iio/light/ltr390.c | 2 +-
drivers/iio/light/ltr501.c | 6 +-
drivers/iio/light/opt3001.c | 2 +-
drivers/iio/light/tsl2772.c | 2 +-
drivers/iio/light/vcnl4000.c | 131 +++-
drivers/iio/light/zopt2201.c | 45 +-
drivers/iio/magnetometer/ak8974.c | 2 +-
drivers/iio/magnetometer/ak8975.c | 6 +-
drivers/iio/magnetometer/bmc150_magn.c | 145 ++--
drivers/iio/magnetometer/si7210.c | 21 +-
drivers/iio/magnetometer/yamaha-yas530.c | 2 +-
drivers/iio/pressure/bmp280-spi.c | 2 +-
drivers/iio/pressure/hsc030pa.c | 2 +-
drivers/iio/pressure/hsc030pa_i2c.c | 7 +-
drivers/iio/pressure/rohm-bm1390.c | 2 +-
drivers/iio/pressure/zpa2326.c | 2 +-
drivers/iio/proximity/Kconfig | 15 +
drivers/iio/proximity/Makefile | 1 +
drivers/iio/proximity/hx9023s.c | 5 +-
drivers/iio/proximity/sx9324.c | 2 +-
drivers/iio/proximity/vl53l1x-i2c.c | 756 ++++++++++++++++++
drivers/iio/resolver/ad2s1210.c | 6 +-
drivers/iio/temperature/ltc2983.c | 4 +-
drivers/iio/test/iio-test-gts.c | 2 +-
drivers/staging/iio/adc/ad7816.c | 16 +-
drivers/staging/iio/frequency/ad9834.c | 20 +-
drivers/staging/iio/impedance-analyzer/ad5933.c | 28 +-
include/linux/iio/adc/qcom-adc5-gen3-common.h | 211 +++++
include/linux/iio/backend.h | 24 +
include/linux/iio/common/st_sensors.h | 11 +-
include/linux/iio/types.h | 1 +
include/linux/platform_data/tsl2772.h | 4 +-
165 files changed, 5740 insertions(+), 2166 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-adc5-gen3.yaml
create mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc-common.yaml
create mode 100644 Documentation/devicetree/bindings/iio/amplifiers/adi,ad8366.yaml
create mode 100644 drivers/iio/adc/qcom-spmi-adc5-gen3.c
create mode 100644 drivers/iio/proximity/vl53l1x-i2c.c
create mode 100644 include/linux/iio/adc/qcom-adc5-gen3-common.h
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PULL] IIO: new device support, features and cleanup for the 7.1 cycle.
2026-03-29 12:04 [PULL] IIO: new device support, features and cleanup for the 7.1 cycle Jonathan Cameron
@ 2026-03-29 12:41 ` Greg KH
2026-03-29 12:49 ` Greg KH
1 sibling, 0 replies; 3+ messages in thread
From: Greg KH @ 2026-03-29 12:41 UTC (permalink / raw)
To: Jonathan Cameron; +Cc: linux-iio
On Sun, Mar 29, 2026 at 01:04:22PM +0100, Jonathan Cameron wrote:
> The following changes since commit f338e77383789c0cae23ca3d48adcc5e9e137e3c:
>
> Linux 7.0-rc4 (2026-03-15 13:52:05 -0700)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-7.1a
>
Pulled and pushed out, thanks.
greg k-h
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PULL] IIO: new device support, features and cleanup for the 7.1 cycle.
2026-03-29 12:04 [PULL] IIO: new device support, features and cleanup for the 7.1 cycle Jonathan Cameron
2026-03-29 12:41 ` Greg KH
@ 2026-03-29 12:49 ` Greg KH
1 sibling, 0 replies; 3+ messages in thread
From: Greg KH @ 2026-03-29 12:49 UTC (permalink / raw)
To: Jonathan Cameron; +Cc: linux-iio
On Sun, Mar 29, 2026 at 01:04:22PM +0100, Jonathan Cameron wrote:
> The following changes since commit f338e77383789c0cae23ca3d48adcc5e9e137e3c:
>
> Linux 7.0-rc4 (2026-03-15 13:52:05 -0700)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-7.1a
Pulled and pushed out, thanks.,
greg k-h
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-03-29 13:17 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-03-29 12:04 [PULL] IIO: new device support, features and cleanup for the 7.1 cycle Jonathan Cameron
2026-03-29 12:41 ` Greg KH
2026-03-29 12:49 ` Greg KH
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox