From: Joshua Crofts via B4 Relay <devnull+joshua.crofts1.gmail.com@kernel.org>
To: "Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
"Alexander Koch" <mail@alexanderkoch.net>,
"Michael Hornung" <mhornung.linux@gmail.com>
Cc: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
Joshua Crofts <joshua.crofts1@gmail.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v2 05/10] iio: light: opt3001: ensure correct parenthesis alignment
Date: Tue, 12 May 2026 12:57:25 +0200 [thread overview]
Message-ID: <20260512-opt3001-cleanup-v2-5-8018cf3a8a0a@gmail.com> (raw)
In-Reply-To: <20260512-opt3001-cleanup-v2-0-8018cf3a8a0a@gmail.com>
From: Joshua Crofts <joshua.crofts1@gmail.com>
Ensure correct parenthesis alignment per checkpatch.pl report.
No functional change.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
---
drivers/iio/light/opt3001.c | 73 +++++++++++++++++++++++++--------------------
1 file changed, 41 insertions(+), 32 deletions(-)
diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c
index 0de8ef4f3e68e6380b47d27e35882c604563377c..ad729152bb9266a35919e3abe576e792dbc08730 100644
--- a/drivers/iio/light/opt3001.c
+++ b/drivers/iio/light/opt3001.c
@@ -224,8 +224,8 @@ static const struct opt3001_scale opt3002_scales[] = {
},
};
-static int opt3001_find_scale(const struct opt3001 *opt, int val,
- int val2, u8 *exponent)
+static int opt3001_find_scale(const struct opt3001 *opt, int val, int val2,
+ u8 *exponent)
{
int i;
for (i = 0; i < ARRAY_SIZE(*opt->chip_info->scales); i++) {
@@ -243,8 +243,8 @@ static int opt3001_find_scale(const struct opt3001 *opt, int val,
return -EINVAL;
}
-static void opt3001_to_iio_ret(struct opt3001 *opt, u8 exponent,
- u16 mantissa, int *val, int *val2)
+static void opt3001_to_iio_ret(struct opt3001 *opt, u8 exponent, u16 mantissa,
+ int *val, int *val2)
{
int ret;
int whole = opt->chip_info->factor_whole;
@@ -365,8 +365,8 @@ static int opt3001_get_processed(struct opt3001 *opt, int *val, int *val2)
if (opt->use_irq) {
/* Wait for the IRQ to indicate the conversion is complete */
ret = wait_event_timeout(opt->result_ready_queue,
- opt->result_ready,
- msecs_to_jiffies(OPT3001_RESULT_READY_LONG));
+ opt->result_ready,
+ msecs_to_jiffies(OPT3001_RESULT_READY_LONG));
if (ret == 0)
return -ETIMEDOUT;
} else {
@@ -475,8 +475,8 @@ static int opt3001_set_int_time(struct opt3001 *opt, int time)
}
static int opt3001_read_raw(struct iio_dev *iio,
- struct iio_chan_spec const *chan, int *val, int *val2,
- long mask)
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
{
struct opt3001 *opt = iio_priv(iio);
int ret;
@@ -507,8 +507,8 @@ static int opt3001_read_raw(struct iio_dev *iio,
}
static int opt3001_write_raw(struct iio_dev *iio,
- struct iio_chan_spec const *chan, int val, int val2,
- long mask)
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
{
struct opt3001 *opt = iio_priv(iio);
int ret;
@@ -533,9 +533,11 @@ static int opt3001_write_raw(struct iio_dev *iio,
}
static int opt3001_read_event_value(struct iio_dev *iio,
- const struct iio_chan_spec *chan, enum iio_event_type type,
- enum iio_event_direction dir, enum iio_event_info info,
- int *val, int *val2)
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int *val, int *val2)
{
struct opt3001 *opt = iio_priv(iio);
int ret = IIO_VAL_INT_PLUS_MICRO;
@@ -545,11 +547,13 @@ static int opt3001_read_event_value(struct iio_dev *iio,
switch (dir) {
case IIO_EV_DIR_RISING:
opt3001_to_iio_ret(opt, opt->high_thresh_exp,
- opt->high_thresh_mantissa, val, val2);
+ opt->high_thresh_mantissa,
+ val, val2);
break;
case IIO_EV_DIR_FALLING:
opt3001_to_iio_ret(opt, opt->low_thresh_exp,
- opt->low_thresh_mantissa, val, val2);
+ opt->low_thresh_mantissa,
+ val, val2);
break;
default:
ret = -EINVAL;
@@ -561,9 +565,11 @@ static int opt3001_read_event_value(struct iio_dev *iio,
}
static int opt3001_write_event_value(struct iio_dev *iio,
- const struct iio_chan_spec *chan, enum iio_event_type type,
- enum iio_event_direction dir, enum iio_event_info info,
- int val, int val2)
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int val, int val2)
{
struct opt3001 *opt = iio_priv(iio);
struct i2c_client *client = opt->client;
@@ -627,8 +633,9 @@ static int opt3001_write_event_value(struct iio_dev *iio,
}
static int opt3001_read_event_config(struct iio_dev *iio,
- const struct iio_chan_spec *chan, enum iio_event_type type,
- enum iio_event_direction dir)
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir)
{
struct opt3001 *opt = iio_priv(iio);
@@ -636,8 +643,10 @@ static int opt3001_read_event_config(struct iio_dev *iio,
}
static int opt3001_write_event_config(struct iio_dev *iio,
- const struct iio_chan_spec *chan, enum iio_event_type type,
- enum iio_event_direction dir, bool state)
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ bool state)
{
struct opt3001 *opt = iio_priv(iio);
struct i2c_client *client = opt->client;
@@ -813,16 +822,16 @@ static irqreturn_t opt3001_irq(int irq, void *_iio)
OPT3001_CONFIGURATION_M_CONTINUOUS) {
if (ret & OPT3001_CONFIGURATION_FH)
iio_push_event(iio,
- IIO_UNMOD_EVENT_CODE(chan_type, 0,
- IIO_EV_TYPE_THRESH,
- IIO_EV_DIR_RISING),
- iio_get_time_ns(iio));
+ IIO_UNMOD_EVENT_CODE(chan_type, 0,
+ IIO_EV_TYPE_THRESH,
+ IIO_EV_DIR_RISING),
+ iio_get_time_ns(iio));
if (ret & OPT3001_CONFIGURATION_FL)
iio_push_event(iio,
- IIO_UNMOD_EVENT_CODE(chan_type, 0,
- IIO_EV_TYPE_THRESH,
- IIO_EV_DIR_FALLING),
- iio_get_time_ns(iio));
+ IIO_UNMOD_EVENT_CODE(chan_type, 0,
+ IIO_EV_TYPE_THRESH,
+ IIO_EV_DIR_FALLING),
+ iio_get_time_ns(iio));
} else if (ret & OPT3001_CONFIGURATION_CRF) {
ret = i2c_smbus_read_word_swapped(client, OPT3001_RESULT);
if (ret < 0) {
@@ -886,8 +895,8 @@ static int opt3001_probe(struct i2c_client *client)
/* Make use of INT pin only if valid IRQ no. is given */
if (irq > 0) {
ret = request_threaded_irq(irq, NULL, opt3001_irq,
- IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
- "opt3001", iio);
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "opt3001", iio);
if (ret) {
dev_err(dev, "failed to request IRQ #%d\n", irq);
return ret;
--
2.47.3
next prev parent reply other threads:[~2026-05-12 10:57 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-12 10:57 [PATCH v2 00/10] iio: light: opt3001: driver cleanup Joshua Crofts via B4 Relay
2026-05-12 10:57 ` [PATCH v2 01/10] iio: light: opt3001: move device registration to end of probe() Joshua Crofts via B4 Relay
2026-05-12 10:57 ` [PATCH v2 02/10] iio: light: opt3001: make headers conform to iwyu Joshua Crofts via B4 Relay
2026-05-12 10:57 ` [PATCH v2 03/10] iio: light: opt3001: use macros from bits.h header Joshua Crofts via B4 Relay
2026-05-12 10:57 ` [PATCH v2 04/10] iio: light: opt3001: use local struct device and i2c_client variables Joshua Crofts via B4 Relay
2026-05-12 11:09 ` Andy Shevchenko
2026-05-12 11:13 ` Joshua Crofts
2026-05-12 11:27 ` Andy Shevchenko
2026-05-12 10:57 ` Joshua Crofts via B4 Relay [this message]
2026-05-12 10:57 ` [PATCH v2 06/10] iio: light: opt3001: localize for loop iterator Joshua Crofts via B4 Relay
2026-05-12 15:40 ` Andy Shevchenko
2026-05-12 10:57 ` [PATCH v2 07/10] iio: light: opt3001: prefer dev_err_probe() Joshua Crofts via B4 Relay
2026-05-12 15:43 ` Andy Shevchenko
2026-05-12 10:57 ` [PATCH v2 08/10] iio: light: opt3001: move driver to guard(mutex)() use Joshua Crofts via B4 Relay
2026-05-12 10:57 ` [PATCH v2 09/10] iio: light: opt3001: switch driver to managed resources Joshua Crofts via B4 Relay
2026-05-12 14:26 ` Jonathan Cameron
2026-05-12 14:32 ` Joshua Crofts
2026-05-12 10:57 ` [PATCH v2 10/10] iio: light: opt3001: add comment to mutex Joshua Crofts via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260512-opt3001-cleanup-v2-5-8018cf3a8a0a@gmail.com \
--to=devnull+joshua.crofts1.gmail.com@kernel.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=andy@kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=joshua.crofts1@gmail.com \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mail@alexanderkoch.net \
--cc=mhornung.linux@gmail.com \
--cc=nuno.sa@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox