[PATCH v3 1/6] iio: accel: HID: hid-sensor-accel-3d: Refactor channel initialization

["Natália Salvino André" <natalia.andre@ime.usp.br>]

Clean up the channel initialization loop and replace the local
accel_3d_adjust_channel_bit_mask() function with a compound literal
to improve code readability.

Signed-off-by: Natália Salvino André <natalia.andre@ime.usp.br>
Co-developed-by: Pietro Di Consolo Gregorio <pietro.gregorio@usp.br>
Signed-off-by: Pietro Di Consolo Gregorio <pietro.gregorio@usp.br>
---
 drivers/iio/accel/hid-sensor-accel-3d.c | 27 +++++++++----------------
 1 file changed, 9 insertions(+), 18 deletions(-)

diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c b/drivers/iio/accel/hid-sensor-accel-3d.c
index 2ff591b3458f..99ca67732bbe 100644
--- a/drivers/iio/accel/hid-sensor-accel-3d.c
+++ b/drivers/iio/accel/hid-sensor-accel-3d.c
@@ -3,6 +3,7 @@
  * HID Sensors Driver
  * Copyright (c) 2012, Intel Corporation.
  */
+#include <linux/bitops.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/module.h>
@@ -119,17 +120,6 @@ static const struct iio_chan_spec gravity_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(CHANNEL_SCAN_INDEX_TIMESTAMP),
 };
 
-/* Adjust channel real bits based on report descriptor */
-static void accel_3d_adjust_channel_bit_mask(struct iio_chan_spec *channels,
-						int channel, int size)
-{
-	channels[channel].scan_type.sign = 's';
-	/* Real storage bits will change based on the report desc. */
-	channels[channel].scan_type.realbits = size * 8;
-	/* Maximum size of a sample to capture is u32 */
-	channels[channel].scan_type.storagebits = sizeof(u32) * 8;
-}
-
 /* Channel read_raw handler */
 static int accel_3d_read_raw(struct iio_dev *indio_dev,
 			      struct iio_chan_spec const *chan,
@@ -297,19 +287,20 @@ static int accel_3d_parse_report(struct platform_device *pdev,
 				struct accel_3d_state *st)
 {
 	int ret;
-	int i;
 
-	for (i = 0; i <= CHANNEL_SCAN_INDEX_Z; ++i) {
+	for (unsigned int ch = CHANNEL_SCAN_INDEX_X; ch <= CHANNEL_SCAN_INDEX_Z; ch++) {
 		ret = sensor_hub_input_get_attribute_info(hsdev,
 				HID_INPUT_REPORT,
 				usage_id,
-				HID_USAGE_SENSOR_ACCEL_X_AXIS + i,
-				&st->accel[CHANNEL_SCAN_INDEX_X + i]);
+				ch,
+				&st->accel[ch]);
 		if (ret < 0)
 			break;
-		accel_3d_adjust_channel_bit_mask(channels,
-				CHANNEL_SCAN_INDEX_X + i,
-				st->accel[CHANNEL_SCAN_INDEX_X + i].size);
+		channels[ch].scan_type = (struct iio_scan_type) {
+			.format = 's',
+			.realbits = BYTES_TO_BITS(st->accel[ch].size),
+			.storagebits = BITS_PER_TYPE(u32),
+		};
 	}
 	dev_dbg(&pdev->dev, "accel_3d %x:%x, %x:%x, %x:%x\n",
 			st->accel[0].index,
-- 
2.51.0