[PATCH V10 2/9] dt-bindings: iio: imu: icm42600: Add icm42607

[Chris Morgan <macroalpha82@gmail.com>]

From: Chris Morgan <macromorgan@hotmail.com>

Add the ICM42607 and ICM42607P inertial measurement unit.

This device is functionally very similar to the icm42600 series with a
very different register layout. The driver does not require an
interrupt for these specific chip revisions.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 .../bindings/iio/imu/invensense,icm42600.yaml  | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
index 9b2af104f186d..81b6e85decd52 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
@@ -30,6 +30,8 @@ properties:
       - invensense,icm42600
       - invensense,icm42602
       - invensense,icm42605
+      - invensense,icm42607
+      - invensense,icm42607p
       - invensense,icm42622
       - invensense,icm42631
       - invensense,icm42686
@@ -67,10 +69,24 @@ properties:
 required:
   - compatible
   - reg
-  - interrupts
 
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - invensense,icm42600
+              - invensense,icm42602
+              - invensense,icm42605
+              - invensense,icm42622
+              - invensense,icm42631
+              - invensense,icm42686
+              - invensense,icm42688
+    then:
+      required:
+        - interrupts
 
 unevaluatedProperties: false
 
-- 
2.43.0