[PATCH 3/3] iio: light: opt4060: Fix incorrect register name in threshold read error message

[Vidhu Sarwal <vidhu.linux@gmail.com>]

opt4060_get_thresholds() correctly reads OPT4060_THRESHOLD_HIGH, but
logs "Failed to read THRESHOLD_LOW." if the read fails. This is a
copy-and-paste mistake, as the preceding low-threshold read already uses
the correct error message.

Update the error message to reference OPT4060_THRESHOLD_HIGH.

Fixes: 0c6db4506ad0 ("iio: light: Add support for TI OPT4060 color sensor")
Signed-off-by: Vidhu Sarwal <vidhu.linux@gmail.com>
---
 drivers/iio/light/opt4060.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/light/opt4060.c b/drivers/iio/light/opt4060.c
index e3aabfb14d5d..f79dd342937d 100644
--- a/drivers/iio/light/opt4060.c
+++ b/drivers/iio/light/opt4060.c
@@ -810,7 +810,7 @@ static int opt4060_get_thresholds(struct opt4060_chip *chip, u32 *th_lo, u32 *th
 
 	ret = regmap_read(chip->regmap, OPT4060_THRESHOLD_HIGH, &regval);
 	if (ret) {
-		dev_err(chip->dev, "Failed to read THRESHOLD_LOW.\n");
+		dev_err(chip->dev, "Failed to read THRESHOLD_HIGH.\n");
 		return ret;
 	}
 	*th_hi = opt4060_calc_val_from_th_reg(regval);
-- 
2.53.0