Linux IIO development
 help / color / mirror / Atom feed
From: Taha Ed-Dafili <0rayn.dev@gmail.com>
To: jic23@kernel.org, lars@metafoo.de
Cc: Michael.Hennerich@analog.com, robh@kernel.org,
	krzk+dt@kernel.org, conor+dt@kernel.org, dlechner@baylibre.com,
	nuno.sa@analog.com, andy@kernel.org, skhan@linuxfoundation.org,
	linux@analog.com, linux-iio@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Taha Ed-Dafili <0rayn.dev@gmail.com>
Subject: [PATCH v5 5/6] iio: dac: ad5504: introduce local lock to protect state and spi transfers
Date: Fri, 21 Aug 2026 06:24:47 -0400	[thread overview]
Message-ID: <20260821102452.37407-6-0rayn.dev@gmail.com> (raw)
In-Reply-To: <20260821102452.37407-1-0rayn.dev@gmail.com>

The driver lacks locking, exposing concurrent access to the shared DMA
SPI buffers, the non-atomic CTRL+NOOP write sequence in powerdown, and
the pwr_down_mask/pwr_down_mode state variables.

Introduce a mutex via devm_mutex_init() and guard(mutex) at the IIO
callbacks to serialize access. In read_raw() and write_raw(), scope the
lock to IIO_CHAN_INFO_RAW only since IIO_CHAN_INFO_SCALE reads vref_mv
which is immutable after probe.

Signed-off-by: Taha Ed-Dafili <0rayn.dev@gmail.com>
---
 drivers/iio/dac/ad5504.c | 26 ++++++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/dac/ad5504.c b/drivers/iio/dac/ad5504.c
index 799726eafdf2..489d2e03e9f6 100644
--- a/drivers/iio/dac/ad5504.c
+++ b/drivers/iio/dac/ad5504.c
@@ -8,11 +8,13 @@
 #include <linux/acpi.h>
 #include <linux/array_size.h>
 #include <linux/bits.h>
+#include <linux/cleanup.h>
 #include <linux/dev_printk.h>
 #include <linux/errno.h>
 #include <linux/interrupt.h>
 #include <linux/kstrtox.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 #include <linux/property.h>
 #include <linux/regulator/consumer.h>
 #include <linux/spi/spi.h>
@@ -55,10 +57,12 @@
  * @pwr_down_mask:	power down mask
  * @pwr_down_mode:	current power down mode
  * @data:		transfer buffer
+ * @lock:		lock to protect state and spi transfers
  */
 struct ad5504_state {
 	struct spi_device		*spi;
 	struct regulator		*reg;
+	struct mutex			lock;
 	unsigned short			vref_mv;
 	unsigned			pwr_down_mask;
 	unsigned			pwr_down_mode;
@@ -109,7 +113,9 @@ static int ad5504_read_raw(struct iio_dev *indio_dev,
 	int ret;
 
 	switch (m) {
-	case IIO_CHAN_INFO_RAW:
+	case IIO_CHAN_INFO_RAW: {
+		guard(mutex)(&st->lock);
+
 		ret = ad5504_spi_read(st, chan->address);
 		if (ret < 0)
 			return ret;
@@ -117,6 +123,7 @@ static int ad5504_read_raw(struct iio_dev *indio_dev,
 		*val = ret;
 
 		return IIO_VAL_INT;
+	}
 	case IIO_CHAN_INFO_SCALE:
 		*val = st->vref_mv;
 		*val2 = chan->scan_type.realbits;
@@ -134,11 +141,14 @@ static int ad5504_write_raw(struct iio_dev *indio_dev,
 	struct ad5504_state *st = iio_priv(indio_dev);
 
 	switch (mask) {
-	case IIO_CHAN_INFO_RAW:
+	case IIO_CHAN_INFO_RAW: {
+		guard(mutex)(&st->lock);
+
 		if (val >= (1 << chan->scan_type.realbits) || val < 0)
 			return -EINVAL;
 
 		return ad5504_spi_write(st, chan->address, val);
+	}
 	default:
 		return -EINVAL;
 	}
@@ -154,6 +164,8 @@ static int ad5504_get_powerdown_mode(struct iio_dev *indio_dev,
 {
 	struct ad5504_state *st = iio_priv(indio_dev);
 
+	guard(mutex)(&st->lock);
+
 	return st->pwr_down_mode;
 }
 
@@ -162,6 +174,8 @@ static int ad5504_set_powerdown_mode(struct iio_dev *indio_dev,
 {
 	struct ad5504_state *st = iio_priv(indio_dev);
 
+	guard(mutex)(&st->lock);
+
 	st->pwr_down_mode = mode;
 
 	return 0;
@@ -179,6 +193,8 @@ static ssize_t ad5504_read_dac_powerdown(struct iio_dev *indio_dev,
 {
 	struct ad5504_state *st = iio_priv(indio_dev);
 
+	guard(mutex)(&st->lock);
+
 	return sysfs_emit(buf, "%d\n",
 			  !(st->pwr_down_mask & (1 << chan->channel)));
 }
@@ -191,6 +207,8 @@ static ssize_t ad5504_write_dac_powerdown(struct iio_dev *indio_dev,
 	int ret;
 	struct ad5504_state *st = iio_priv(indio_dev);
 
+	guard(mutex)(&st->lock);
+
 	ret = kstrtobool(buf, &pwr_down);
 	if (ret)
 		return ret;
@@ -290,6 +308,10 @@ static int ad5504_probe(struct spi_device *spi)
 
 	st = iio_priv(indio_dev);
 
+	ret = devm_mutex_init(dev, &st->lock);
+	if (ret)
+		return ret;
+
 	if (is_acpi_device_node(dev_fwnode(dev))) {
 		st->vref_mv = AD5504_VREF_ACPI_DEFAULT_mV;
 	} else {
-- 
2.55.0


  parent reply	other threads:[~2026-08-21 10:25 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-21 10:24 [PATCH v5 0/6] iio: dac: ad5504: bindings, cleanups, locking, and scale fixes Taha Ed-Dafili
2026-08-21 10:24 ` [PATCH v5 1/6] dt-bindings: iio: dac: ad5504: add output-range and missing gpios Taha Ed-Dafili
2026-08-21 10:24 ` [PATCH v5 2/6] iio: dac: ad5504: Align headers with IWYU principle Taha Ed-Dafili
2026-08-21 10:24 ` [PATCH v5 3/6] iio: dac: ad5504: separate ACPI and DT paths Taha Ed-Dafili
2026-08-21 11:20   ` Joshua Crofts
2026-08-21 11:41     ` [PATCH v5 3/6] iio: dac: ad5504: strictly separate ACPI and DT probe paths Taha Ed-Dafili
2026-08-21 11:58       ` Joshua Crofts
2026-08-21 10:24 ` [PATCH v5 4/6] iio: dac: ad5504: remove legacy platform data support Taha Ed-Dafili
2026-08-21 10:24 ` Taha Ed-Dafili [this message]
2026-08-21 13:31   ` [PATCH v5 5/6] iio: dac: ad5504: introduce local lock to protect state and spi transfers Andy Shevchenko
2026-08-21 14:05     ` Taha Ed-Dafili
2026-08-21 10:24 ` [PATCH v5 6/6] iio: dac: ad5504: support scale via output-range-microvolt property Taha Ed-Dafili

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260821102452.37407-6-0rayn.dev@gmail.com \
    --to=0rayn.dev@gmail.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=andy@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=jic23@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@analog.com \
    --cc=nuno.sa@analog.com \
    --cc=robh@kernel.org \
    --cc=skhan@linuxfoundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox