Linux IIO development
 help / color / mirror / Atom feed
From: Kurt Borja <kuurtb@gmail.com>
To: Kurt Borja <kuurtb@gmail.com>,
	Jonathan Cameron <jic23@kernel.org>,
	 Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	David Lechner <dlechner@baylibre.com>
Cc: "Nuno Sá" <nuno.sa@analog.com>,
	"Andy Shevchenko" <andy@kernel.org>,
	linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v4 09/10] iio: adc: ti-ads1262: support REFOUT and VBIAS regulators
Date: Fri, 28 Aug 2026 01:38:24 -0500	[thread overview]
Message-ID: <20260828-ads126x-v4-9-1dc27e9c0260@gmail.com> (raw)
In-Reply-To: <20260828-ads126x-v4-0-1dc27e9c0260@gmail.com>

Register the "refout" and "vbias" regulators to be able to use them as
common mode supplies.

Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/iio/adc/Kconfig      |   1 +
 drivers/iio/adc/ti-ads1262.c | 119 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 120 insertions(+)

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 2b60ade01e90..4548fec1f86f 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -1864,6 +1864,7 @@ config TI_ADS1262
 	tristate "Texas Instruments ADS1262"
 	depends on SPI
 	select REGMAP
+	select REGULATOR
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
diff --git a/drivers/iio/adc/ti-ads1262.c b/drivers/iio/adc/ti-ads1262.c
index 3f6d34a08b29..4784142f35c9 100644
--- a/drivers/iio/adc/ti-ads1262.c
+++ b/drivers/iio/adc/ti-ads1262.c
@@ -25,6 +25,7 @@
 #include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
+#include <linux/regulator/driver.h>
 #include <linux/spi/spi.h>
 #include <linux/string.h>
 #include <linux/types.h>
@@ -1132,6 +1133,120 @@ static irqreturn_t ads1262_irq_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int ads1262_vbias_enable(struct regulator_dev *rdev)
+{
+	struct ads1262 *st = rdev_get_drvdata(rdev);
+
+	guard(mutex)(&st->xfer_lock);
+
+	return regmap_set_bits(st->regmap, ADS1262_POWER_REG,
+			       ADS1262_POWER_VBIAS_MASK);
+}
+
+static int ads1262_vbias_disable(struct regulator_dev *rdev)
+{
+	struct ads1262 *st = rdev_get_drvdata(rdev);
+
+	guard(mutex)(&st->xfer_lock);
+
+	return regmap_clear_bits(st->regmap, ADS1262_POWER_REG,
+				 ADS1262_POWER_VBIAS_MASK);
+}
+
+static int ads1262_vbias_is_enabled(struct regulator_dev *rdev)
+{
+	struct ads1262 *st = rdev_get_drvdata(rdev);
+
+	guard(mutex)(&st->xfer_lock);
+
+	return regmap_test_bits(st->regmap, ADS1262_POWER_REG,
+				ADS1262_POWER_VBIAS_MASK);
+}
+
+static int ads1262_vbias_get_voltage(struct regulator_dev *rdev)
+{
+	struct ads1262 *st = rdev_get_drvdata(rdev);
+	int avdd_uV, avss_uV;
+
+	avdd_uV = regulator_get_voltage(st->avdd_supply);
+	if (avdd_uV < 0)
+		return avdd_uV;
+
+	avss_uV = st->avss_supply ? regulator_get_voltage(st->avss_supply) : 0;
+	if (avss_uV < 0)
+		return avss_uV;
+
+	return DIV_ROUND_CLOSEST(avdd_uV - avss_uV, 2);
+}
+
+static const struct regulator_ops ads1262_vbias_regulator_ops = {
+	.enable = ads1262_vbias_enable,
+	.disable = ads1262_vbias_disable,
+	.is_enabled = ads1262_vbias_is_enabled,
+	.get_voltage = ads1262_vbias_get_voltage,
+};
+
+static int ads1262_refout_is_enabled(struct regulator_dev *rdev)
+{
+	struct ads1262 *st = rdev_get_drvdata(rdev);
+
+	guard(mutex)(&st->xfer_lock);
+
+	return regmap_test_bits(st->regmap, ADS1262_POWER_REG,
+				ADS1262_POWER_INTREF_MASK);
+}
+
+static const struct regulator_ops ads1262_refout_regulator_ops = {
+	.is_enabled = ads1262_refout_is_enabled,
+};
+
+static const struct regulator_desc ads1262_vbias_regulator_desc = {
+	.name = "vbias",
+	.of_match = "vbias",
+	.regulators_node = "regulators",
+	.supply_name = "avdd",
+	.ops = &ads1262_vbias_regulator_ops,
+	.type = REGULATOR_VOLTAGE,
+	.owner = THIS_MODULE,
+};
+
+static const struct regulator_desc ads1262_refout_regulator_desc = {
+	.name = "refout",
+	.of_match = "refout",
+	.regulators_node = "regulators",
+	.supply_name = "avdd",
+	.n_voltages = 1,
+	.fixed_uV = 2500000,
+	.ops = &ads1262_refout_regulator_ops,
+	.type = REGULATOR_VOLTAGE,
+	.owner = THIS_MODULE,
+};
+
+static int ads1262_register_regulators(struct ads1262 *st)
+{
+	struct device *dev = &st->spi->dev;
+	struct regulator_config config = {
+		.dev = dev,
+		.driver_data = st,
+	};
+	struct regulator_dev *rdev;
+
+	struct fwnode_handle *reg_node __free(fwnode_handle) =
+		device_get_named_child_node(dev, "regulators");
+	if (!reg_node)
+		return 0;
+
+	rdev = devm_regulator_register(dev, &ads1262_refout_regulator_desc,
+				       &config);
+	if (IS_ERR(rdev))
+		return PTR_ERR(rdev);
+
+	rdev = devm_regulator_register(dev, &ads1262_vbias_regulator_desc,
+				       &config);
+
+	return PTR_ERR_OR_ZERO(rdev);
+}
+
 static int ads1262_dev_configure(struct ads1262 *st)
 {
 	struct device *dev = &st->spi->dev;
@@ -1939,6 +2054,10 @@ static int ads1262_spi_probe(struct spi_device *spi)
 
 	indio_dev->name = ads1262_device_id_to_name[st->dev_id];
 
+	ret = ads1262_register_regulators(st);
+	if (ret)
+		return ret;
+
 	ret = ads1262_populate_tables(indio_dev);
 	if (ret)
 		return ret;

-- 
2.55.0


  parent reply	other threads:[~2026-08-28  6:38 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-28  6:38 [PATCH v4 00/10] iio: adc: Add TI ADS126X ADC family support Kurt Borja
2026-08-28  6:38 ` [PATCH v4 01/10] dt-bindings: adc: add excitation-current-chopping property Kurt Borja
2026-08-28 16:33   ` Conor Dooley
2026-08-28  6:38 ` [PATCH v4 02/10] dt-bindings: iio: adc: support the TI ADS126x ADC family Kurt Borja
2026-08-28 16:39   ` Conor Dooley
2026-08-28  6:38 ` [PATCH v4 03/10] iio: adc: add the ti-ads1262 driver Kurt Borja
2026-08-28  8:09   ` Andy Shevchenko
2026-08-28  6:38 ` [PATCH v4 04/10] iio: adc: ti-ads1262: support per-channel sampling frequency Kurt Borja
2026-08-28  6:38 ` [PATCH v4 05/10] iio: adc: ti-ads1262: support per-channel reference and gain Kurt Borja
2026-08-28  6:38 ` [PATCH v4 06/10] iio: adc: ti-ads1262: support input chopping Kurt Borja
2026-08-28  6:38 ` [PATCH v4 07/10] iio: adc: ti-ads1262: support excitation currents Kurt Borja
2026-08-28  6:38 ` [PATCH v4 08/10] iio: adc: ti-ads1262: support triggered buffer sampling Kurt Borja
2026-08-28  6:38 ` Kurt Borja [this message]
2026-08-28  6:38 ` [PATCH v4 10/10] iio: adc: ti-ads1262: support common mode supplies Kurt Borja

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260828-ads126x-v4-9-1dc27e9c0260@gmail.com \
    --to=kuurtb@gmail.com \
    --cc=andy@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=jic23@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nuno.sa@analog.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox