Linux IIO development
 help / color / mirror / Atom feed
From: Conor Dooley <conor@kernel.org>
To: Chang Yu <marcus.yu.56@gmail.com>
Cc: "Jonathan Cameron" <jic23@kernel.org>,
	"Joshua Crofts" <joshua.crofts1@gmail.com>,
	"David Lechner" <dlechner@baylibre.com>,
	"Nuno Sá" <nuno.sa@analog.com>,
	"Andy Shevchenko" <andy@kernel.org>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, "Shi Hao" <i.shihao.999@gmail.com>,
	"Jose A. Perez de Azpillaga" <azpijr@gmail.com>
Subject: Re: [PATCH v2 1/2] dt-bindings: iio: light: add as7343
Date: Tue, 8 Sep 2026 19:13:55 +0100	[thread overview]
Message-ID: <20260908-dinner-shelve-1d61e19ee3b7@spud> (raw)
In-Reply-To: <20260907210042.32552-2-marcus.yu.56@gmail.com>

[-- Attachment #1: Type: text/plain, Size: 4446 bytes --]

On Mon, Sep 07, 2026 at 02:00:41PM -0700, Chang Yu wrote:
> Add binding for AMS AS7343 which is a 14-channel multi-spectral sensor
> with i2c address of 0x39.
> 
> The GPIO pin is described as a generic GPIO for now. Binding design for the
> more advanced measurement/LED synchronization use cases are deferred to
> future patches.

Unfortunately, you can't change what you document, so picking something
correct now is needed - even if the driver doesn't use it yet.
> 
> Datasheet: https://look.ams-osram.com/m/5f2d27fff9a874d2/original/AS7343-14-Channel-Multi-Spectral-Sensor.pdf
> Signed-off-by: Chang Yu <marcus.yu.56@gmail.com>
> ---
> Changes in v2:
>   - Add the LDR, the interrupt pin, and the GPIO pin to the bindings.
>   - Fix node name and unit address mismatch.
>   - Include MAINTAINERS changes.
> 
>  .../bindings/iio/light/ams,as7343.yaml        | 69 +++++++++++++++++++
>  MAINTAINERS                                   |  6 ++
>  2 files changed, 75 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/light/ams,as7343.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/light/ams,as7343.yaml b/Documentation/devicetree/bindings/iio/light/ams,as7343.yaml
> new file mode 100644
> index 000000000000..b06d445b92b3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/light/ams,as7343.yaml
> @@ -0,0 +1,69 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/light/ams,as7343.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: AMS AS7343 14-Channel Multi-Spectral Sensor
> +
> +maintainers:
> +  - Chang Yu <marcus.yu.56@gmail.com>
> +
> +description: |
> +  The AMS AS7343 is a 14-channel multi-spectral sensor with i2c address of 0x39.
> +  https://look.ams-osram.com/m/5f2d27fff9a874d2/original/AS7343-14-Channel-Multi-Spectral-Sensor.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - ams,as7343
> +
> +  reg:
> +    description:
> +      I2C address of the device (0x39).
> +    maxItems: 1
> +
> +  interrupts:
> +    description:
> +      Open drain output active low interrupt pin.
> +    maxItems: 1
> +
> +  vdd-supply: true
> +
> +  ams,led-current-microamp:
> +    description:
> +      The driver current for the external LED connected to the LDR pin.
> +    minimum: 4000
> +    maximum: 258000
> +    multipleOf: 2000
> +    default: 12000

Rather than a custom property, the tsl2772 uses led-max-microamp:
tsl2772.yaml
46:  led-max-microamp:
81:                led-max-microamp = <100000>;

I wonder if the same should be done here, or if there should be an leds
subnode? Perhaps the IIO folks can comment on that.

> +
> +  gpios:
> +    description:
> +      Optional GPIO pin for general I/O.

Please expand on "general IO". Docs appear to suggest this is used for
synchronisation.

Additionally, I think this name will make the gpio somewhat difficult to
request. Calling it "sync-gpios" or w/e will permit the usual gpiod
functions being used.

> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - vdd-supply
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        multispectral-sensor@39 {
> +            compatible = "ams,as7343";
> +            reg = <0x39>;
> +            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
> +            vdd-supply = <&vdd_regulator>;
> +            ams,led-current-microamp = <14000>;
> +            gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;

Valid Sashiko comment here I believe.
pw-bot: changes-requested

Thanks,
Conor.

> +        };
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 04fa5322d9f7..8cf4e1635053 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1430,6 +1430,12 @@ S:	Maintained
>  F:	Documentation/devicetree/bindings/iio/light/ams,as73211.yaml
>  F:	drivers/iio/light/as73211.c
>  
> +AMS AS7343 DRIVER
> +M:	Chang Yu <marcus.yu.56@gmail.com>
> +L:	linux-iio@vger.kernel.org
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/iio/light/ams,as7343.yaml
> +
>  AMT (Automatic Multicast Tunneling)
>  M:	Taehee Yoo <ap420073@gmail.com>
>  L:	netdev@vger.kernel.org
> -- 
> 2.55.0
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

  reply	other threads:[~2026-09-08 18:13 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-07 21:00 [PATCH v2 0/2] Add support for AS7343 multi-spectral sensor Chang Yu
2026-09-07 21:00 ` [PATCH v2 1/2] dt-bindings: iio: light: add as7343 Chang Yu
2026-09-08 18:13   ` Conor Dooley [this message]
2026-09-13  0:42     ` Jonathan Cameron
2026-09-07 21:00 ` [PATCH v2 2/2] iio: light: add AS7343 multi-spectral sensor driver Chang Yu
2026-09-08  8:01   ` Joshua Crofts

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260908-dinner-shelve-1d61e19ee3b7@spud \
    --to=conor@kernel.org \
    --cc=andy@kernel.org \
    --cc=azpijr@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=i.shihao.999@gmail.com \
    --cc=jic23@kernel.org \
    --cc=joshua.crofts1@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcus.yu.56@gmail.com \
    --cc=nuno.sa@analog.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox