From: Viral Patel <viral8854@gmail.com>
To: "Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Dixit Parmar" <dixitparmar19@gmail.com>
Cc: Victor Chernyakin <chernyakin.victor.j@outlook.com>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Viral Patel <viral8854@gmail.com>
Subject: [PATCH v2 1/2] dt-bindings: iio: magnetometer: infineon,tlv493d-a1b6: add TLE493D-W2B6
Date: Sat, 21 Nov 2026 11:25:10 +0530 [thread overview]
Message-ID: <20261121-tle493d-v2-1-92d7e57cec89@gmail.com> (raw)
In-Reply-To: <20261121-tle493d-v2-0-92d7e57cec89@gmail.com>
Add the Infineon TLE493D-W2B6, a 3D Hall effect magnetic sensor with
12-bit resolution per axis and an integrated temperature sensor,
accessed over I2C. It is a second-generation sibling of the
TLV493D-A1B6 with a different register interface, so it gets its own
compatible, but it has the same supply range and the same /INT output
sharing the SCL pin, so it fits the existing binding.
The A0 to A3 variants of the part only differ in their default I2C
address, so a single compatible covers all of them.
Signed-off-by: Viral Patel <viral8854@gmail.com>
---
.../bindings/iio/magnetometer/infineon,tlv493d-a1b6.yaml | 14 ++++++++++++--
MAINTAINERS | 6 ++++++
2 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/infineon,tlv493d-a1b6.yaml b/Documentation/devicetree/bindings/iio/magnetometer/infineon,tlv493d-a1b6.yaml
index dd23a9370a71..3f0058cbf538 100644
--- a/Documentation/devicetree/bindings/iio/magnetometer/infineon,tlv493d-a1b6.yaml
+++ b/Documentation/devicetree/bindings/iio/magnetometer/infineon,tlv493d-a1b6.yaml
@@ -4,17 +4,27 @@
$id: http://devicetree.org/schemas/iio/magnetometer/infineon,tlv493d-a1b6.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Infineon Technologies TLV493D Low-Power 3D Magnetic Sensor
+title: Infineon Technologies TLV493D and TLE493D 3D Magnetic Sensors
maintainers:
- Dixit Parmar <dixitparmar19@gmail.com>
+ - Viral Patel <viral8854@gmail.com>
+
+description: |
+ 3D Hall effect magnetic sensors with an I2C interface. The /INT output
+ shares a pin with SCL.
+
+ The A0 to A3 variants of the TLE493D-W2B6 only differ in their default
+ I2C address (0x35, 0x22, 0x78 and 0x44).
properties:
$nodename:
pattern: '^magnetometer@[0-9a-f]+$'
compatible:
- const: infineon,tlv493d-a1b6
+ enum:
+ - infineon,tle493d-w2b6
+ - infineon,tlv493d-a1b6
reg:
maxItems: 1
diff --git a/MAINTAINERS b/MAINTAINERS
index 02015eaec312..c3004f683e78 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13117,6 +13117,12 @@ S: Maintained
F: Documentation/devicetree/bindings/sound/infineon,peb2466.yaml
F: sound/soc/codecs/peb2466.c
+INFINEON TLE493D-W2B6 DRIVER
+M: Viral Patel <viral8854@gmail.com>
+L: linux-iio@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/iio/magnetometer/infineon,tlv493d-a1b6.yaml
+
INFINEON TLV493D Driver
M: Dixit Parmar <dixitparmar19@gmail.com>
L: linux-iio@vger.kernel.org
--
2.43.0
next prev parent reply other threads:[~2026-11-21 5:55 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-21 5:55 [PATCH v2 0/2] iio: magnetometer: add Infineon TLE493D-W2B6 support Viral Patel
2026-11-21 5:55 ` Viral Patel [this message]
2026-11-21 19:29 ` [PATCH v2 1/2] dt-bindings: iio: magnetometer: infineon,tlv493d-a1b6: add TLE493D-W2B6 Jonathan Cameron
2026-11-21 5:55 ` [PATCH v2 2/2] iio: magnetometer: add Infineon TLE493D-W2B6 driver Viral Patel
2026-11-21 19:59 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261121-tle493d-v2-1-92d7e57cec89@gmail.com \
--to=viral8854@gmail.com \
--cc=andy@kernel.org \
--cc=chernyakin.victor.j@outlook.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dixitparmar19@gmail.com \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox