Re: [PATCH v2 0/4] iio: humidity: Add driver for TI HDC302x humidity sensors

[Javier Carrasco <javier.carrasco.cruz@gmail.com>]

Sorry, this was not meant to be sent to the mailing list yet, please ignore.

On 05.12.23 09:33, Javier Carrasco wrote:
> Updated version of my modifications. From my side the series is ready
> for a new version to send upstream.
> 
> Feel free to add any improvements or discuss any of my modifications.
> 
> Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
> ---
> Changes in v2:
> - Drop IIO_CHAN_INFO_PEAK_SCALE. It was discussed with Jonathan Cameron
>   and this modifier will only be required if its value overrides the
>   _SCALE value.
> - Document the new _TROUGH modifier.
> - Fix heater configuration order: config value and then enable.
> 
> ---
> Javier Carrasco (2):
>       iio: core: introduce trough modifier for minimum values
>       iio: ABI: document temperature and humidity peak/trough raw attributes
> 
> Li peiyu (2):
>       dt-bindings: iio: humidity: Add TI HDC302x support
>       iio: humidity: Add driver for TI HDC302x humidity sensors
> 
>  Documentation/ABI/testing/sysfs-bus-iio            |  13 +-
>  .../bindings/iio/humidity/ti,hdc3020.yaml          |  55 +++
>  MAINTAINERS                                        |   8 +
>  drivers/iio/humidity/Kconfig                       |  12 +
>  drivers/iio/humidity/Makefile                      |   1 +
>  drivers/iio/humidity/hdc3020.c                     | 468 +++++++++++++++++++++
>  drivers/iio/industrialio-core.c                    |   1 +
>  include/linux/iio/types.h                          |   1 +
>  8 files changed, 558 insertions(+), 1 deletion(-)
> ---
> base-commit: 33cc938e65a98f1d29d0a18403dbbee050dcad9a
> change-id: 20231130-hdc302x-59b8a9c312b0
> 
> Best regards,