Re: [PATCH 4/5] dt-bindings: iio: adc: add ad7405

[David Lechner <dlechner@baylibre.com>]

On 3/24/25 4:07 AM, Pop Ioan Daniel wrote:
> Add devicetree bindings for ad7405/adum770x family.
> 
> Signed-off-by: Pop Ioan Daniel <pop.ioan-daniel@analog.com>
> ---
>  .../bindings/iio/adc/adi,ad7405.yaml          | 68 +++++++++++++++++++
>  1 file changed, 68 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7405.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7405.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7405.yaml
> new file mode 100644
> index 000000000000..e312fa0cdb05
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7405.yaml
> @@ -0,0 +1,68 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright 2025 Analog Devices Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/adc/adi,ad7405.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices AD7405 family
> +
> +maintainers:
> +  - Dragos Bogdan <dragos.bogdan@analog.com>
> +
> +description: |
> +  Analog Devices AD7405 is a high performance isolated ADC, 1-channel,
> +  16-bit with a second-order Σ-Δ modulator that converts an analog input signal
> +  into a high speed, single-bit data stream.
> +
> +  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7405.pdf
> +  https://www.analog.com/media/en/technical-documentation/data-sheets/adum7701.pdf
> +  https://www.analog.com/media/en/technical-documentation/data-sheets/adum7702.pdf
> +  https://www.analog.com/media/en/technical-documentation/data-sheets/ADuM7703.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - adi,ad7405
> +      - adi,adum7701
> +      - adi,adum7702
> +      - adi,adum7703
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 0
> +

There are no child nodes, so we don't need #address-cells or #size-cells.


> +  vdd1-supply: true
> +
> +  vdd2-supply: true
> +
> +  clocks:
> +    maxitems: 1
> +
> +  io-backends:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - vdd1-supply
> +  - vdd2-supply
> +  - clocks
> +  - io-backends
> +
> +unevaluatedProperties: false

Should be able to use additionalProperties: false here instead.

> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>

This include isn't used and can be removed.

> +    adc {
> +       #address-cells = <1>;
> +        #size-cells = <0>;

Not needed as above.

> +        compatible = "adi,ad7405";
> +        clocks = <&axi_clk_gen 0>;
> +        vdd1-supply = <&vdd1>;
> +        vdd2-supply = <&vdd2>;
> +        io-backends = <&iio_backend>;
> +    };
> +...
> \ No newline at end of file