From: Matti Vaittinen <mazziesaccount@gmail.com>
To: Matti Vaittinen <mazziesaccount@gmail.com>,
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Cc: Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Matti Vaittinen <mazziesaccount@gmail.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Nikita Yushchenko <nikita.yoush@cogentembedded.com>,
Cosmin Tanislav <demonsingur@gmail.com>,
Jagath Jog J <jagathjog1996@gmail.com>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [RFC PATCH 2/5] regulator: Add devm helpers for get and enable
Date: Wed, 21 Sep 2022 14:43:49 +0300 [thread overview]
Message-ID: <41d2c0a9af344b7fa4eafe8d63e3c3458059fa84.1663760018.git.mazziesaccount@gmail.com> (raw)
In-Reply-To: <cover.1663760018.git.mazziesaccount@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 6614 bytes --]
A few regulator consumer drivers seem to be just getting a regulator,
enabling it and registering a devm-action to disable the regulator at
the driver detach and then forget about it.
We can simplify this a bit by adding a devm-helper for this pattern.
Add devm_regulator_get_enable() and devm_regulator_get_enable_optional()
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/ed7b8841193bb9749d426f3cb3b199c9460794cd.1660292316.git.mazziesaccount@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
Please note - this patch is already in Mark's tree. It's here just to
allow compilation of the series on top of v6.0-rc4
drivers/regulator/devres.c | 105 +++++++++++++++++++++++++++++
include/linux/regulator/consumer.h | 14 ++++
2 files changed, 119 insertions(+)
diff --git a/drivers/regulator/devres.c b/drivers/regulator/devres.c
index 3cb3eb49ad8a..3265e75e97ab 100644
--- a/drivers/regulator/devres.c
+++ b/drivers/regulator/devres.c
@@ -253,6 +253,111 @@ int devm_regulator_bulk_get_const(struct device *dev, int num_consumers,
}
EXPORT_SYMBOL_GPL(devm_regulator_bulk_get_const);
+static int devm_regulator_bulk_match(struct device *dev, void *res,
+ void *data)
+{
+ struct regulator_bulk_devres *match = res;
+ struct regulator_bulk_data *target = data;
+
+ /*
+ * We check the put uses same consumer list as the get did.
+ * We _could_ scan all entries in consumer array and check the
+ * regulators match but ATM I don't see the need. We can change this
+ * later if needed.
+ */
+ return match->consumers == target;
+}
+
+/**
+ * devm_regulator_bulk_put - Resource managed regulator_bulk_put()
+ * @consumers: consumers to free
+ *
+ * Deallocate regulators allocated with devm_regulator_bulk_get(). Normally
+ * this function will not need to be called and the resource management
+ * code will ensure that the resource is freed.
+ */
+void devm_regulator_bulk_put(struct regulator_bulk_data *consumers)
+{
+ int rc;
+ struct regulator *regulator = consumers[0].consumer;
+
+ rc = devres_release(regulator->dev, devm_regulator_bulk_release,
+ devm_regulator_bulk_match, consumers);
+ if (rc != 0)
+ WARN_ON(rc);
+}
+EXPORT_SYMBOL_GPL(devm_regulator_bulk_put);
+
+static void devm_regulator_bulk_disable(void *res)
+{
+ struct regulator_bulk_devres *devres = res;
+ int i;
+
+ for (i = 0; i < devres->num_consumers; i++)
+ regulator_disable(devres->consumers[i].consumer);
+}
+
+/**
+ * devm_regulator_bulk_get_enable - managed get'n enable multiple regulators
+ *
+ * @dev: device to supply
+ * @num_consumers: number of consumers to register
+ * @id: list of supply names or regulator IDs
+ *
+ * @return 0 on success, an errno on failure.
+ *
+ * This helper function allows drivers to get several regulator
+ * consumers in one operation with management, the regulators will
+ * automatically be freed when the device is unbound. If any of the
+ * regulators cannot be acquired then any regulators that were
+ * allocated will be freed before returning to the caller.
+ */
+int devm_regulator_bulk_get_enable(struct device *dev, int num_consumers,
+ const char * const *id)
+{
+ struct regulator_bulk_devres *devres;
+ struct regulator_bulk_data *consumers;
+ int i, ret;
+
+ devres = devm_kmalloc(dev, sizeof(*devres), GFP_KERNEL);
+ if (!devres)
+ return -ENOMEM;
+
+ devres->consumers = devm_kcalloc(dev, num_consumers, sizeof(*consumers),
+ GFP_KERNEL);
+ consumers = devres->consumers;
+ if (!consumers)
+ return -ENOMEM;
+
+ devres->num_consumers = num_consumers;
+
+ for (i = 0; i < num_consumers; i++)
+ consumers[i].supply = id[i];
+
+ ret = devm_regulator_bulk_get(dev, num_consumers, consumers);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < num_consumers; i++) {
+ ret = regulator_enable(consumers[i].consumer);
+ if (ret)
+ goto unwind;
+ }
+
+ ret = devm_add_action(dev, devm_regulator_bulk_disable, devres);
+ if (!ret)
+ return 0;
+
+unwind:
+ while (--i >= 0)
+ regulator_disable(consumers[i].consumer);
+
+ devm_regulator_bulk_put(consumers);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(devm_regulator_bulk_get_enable);
+
static void devm_rdev_release(struct device *dev, void *res)
{
regulator_unregister(*(struct regulator_dev **)res);
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index 8e6cf65851b0..ee3b4a014611 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -246,12 +246,15 @@ int __must_check regulator_bulk_get(struct device *dev, int num_consumers,
struct regulator_bulk_data *consumers);
int __must_check devm_regulator_bulk_get(struct device *dev, int num_consumers,
struct regulator_bulk_data *consumers);
+void devm_regulator_bulk_put(struct regulator_bulk_data *consumers);
int __must_check devm_regulator_bulk_get_const(
struct device *dev, int num_consumers,
const struct regulator_bulk_data *in_consumers,
struct regulator_bulk_data **out_consumers);
int __must_check regulator_bulk_enable(int num_consumers,
struct regulator_bulk_data *consumers);
+int devm_regulator_bulk_get_enable(struct device *dev, int num_consumers,
+ const char * const *id);
int regulator_bulk_disable(int num_consumers,
struct regulator_bulk_data *consumers);
int regulator_bulk_force_disable(int num_consumers,
@@ -388,6 +391,10 @@ static inline void devm_regulator_put(struct regulator *regulator)
{
}
+static inline void devm_regulator_bulk_put(struct regulator_bulk_data *consumers)
+{
+}
+
static inline int regulator_register_supply_alias(struct device *dev,
const char *id,
struct device *alias_dev,
@@ -478,6 +485,13 @@ static inline int regulator_bulk_enable(int num_consumers,
return 0;
}
+static inline int devm_regulator_bulk_get_enable(struct device *dev,
+ int num_consumers,
+ const char * const *id)
+{
+ return 0;
+}
+
static inline int regulator_bulk_disable(int num_consumers,
struct regulator_bulk_data *consumers)
{
--
2.37.1
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
next prev parent reply other threads:[~2022-09-21 11:44 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-21 11:40 [RFC PATCH 0/5] iio: Support ROHM/Kionix kx022a Matti Vaittinen
2022-09-21 11:42 ` [RFC PATCH 1/5] regulator: Add devm helpers for get and enable Matti Vaittinen
2022-09-21 11:43 ` Matti Vaittinen [this message]
2022-09-21 11:45 ` [RFC PATCH 3/5] dt-bindings: iio: Add KX022A accelerometer Matti Vaittinen
2022-09-21 19:11 ` Krzysztof Kozlowski
2022-09-21 19:30 ` Vaittinen, Matti
2022-09-21 19:56 ` Krzysztof Kozlowski
2022-09-22 3:49 ` Matti Vaittinen
2022-09-21 11:45 ` [RFC PATCH 4/5] iio: accel: Support Kionix/ROHM " Matti Vaittinen
2022-09-21 19:18 ` Vaittinen, Matti
2022-09-22 17:03 ` Jonathan Cameron
2022-09-23 6:31 ` Matti Vaittinen
2022-09-24 15:17 ` Jonathan Cameron
2022-09-26 5:02 ` Vaittinen, Matti
2022-10-02 11:11 ` Jonathan Cameron
2022-09-28 11:14 ` Matti Vaittinen
2022-09-28 14:06 ` Andy Shevchenko
2022-09-28 16:23 ` Matti Vaittinen
2022-10-02 11:14 ` Jonathan Cameron
2022-10-02 11:18 ` Jonathan Cameron
2022-10-02 14:31 ` Matti Vaittinen
2022-09-21 11:46 ` [RFC PATCH 5/5] MAINTAINERS: Add KX022A maintainer entry Matti Vaittinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41d2c0a9af344b7fa4eafe8d63e3c3458059fa84.1663760018.git.mazziesaccount@gmail.com \
--to=mazziesaccount@gmail.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=demonsingur@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jagathjog1996@gmail.com \
--cc=jic23@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=matti.vaittinen@fi.rohmeurope.com \
--cc=nikita.yoush@cogentembedded.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox