From: Jonathan Cameron <jic23@cam.ac.uk>
To: Mike Frysinger <vapier@gentoo.org>
Cc: linux-iio@vger.kernel.org,
device-drivers-devel@blackfin.uclinux.org,
Sonic Zhang <sonic.zhang@analog.com>
Subject: BUILD ISSUE: Re: [PATCH 07/36] staging: iio: adc: new driver for AD7291 devices
Date: Mon, 25 Oct 2010 14:41:24 +0100 [thread overview]
Message-ID: <4CC58904.9010401@cam.ac.uk> (raw)
In-Reply-To: <1287955358-3153-8-git-send-email-vapier@gentoo.org>
On 10/24/10 22:22, Mike Frysinger wrote:
> From: Sonic Zhang <sonic.zhang@analog.com>
Build test results (cross compiled for arm) on top of staging-next
drivers/staging/iio/adc/ad7291.c: In function 'ad7291_probe':
drivers/staging/iio/adc/ad7291.c:951: error: 'struct i2c_client' has no member named 'irq_flags'
drivers/staging/iio/adc/ad7291.c:966: error: 'struct i2c_client' has no member named 'irq_flags'
Google tells me you guys have posted a patch adding this a couple of weeks back. Doesn't
look like Jean liked it... If it is merging you need to tell Greg that there is a dependency
on it when you send him the merge request. Otherwise just remove the usage and rely on it
happening in board setup code. Personally I agree with what the patch was trying to do, but
if it isn't merging we don't want to hold this driver up waiting for it.
>
> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
> ---
> drivers/staging/iio/adc/Kconfig | 7 +
> drivers/staging/iio/adc/Makefile | 1 +
> drivers/staging/iio/adc/ad7291.c | 1039 ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 1047 insertions(+), 0 deletions(-)
> create mode 100644 drivers/staging/iio/adc/ad7291.c
>
> diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig
> index 7f03571..fa78413 100644
> --- a/drivers/staging/iio/adc/Kconfig
> +++ b/drivers/staging/iio/adc/Kconfig
> @@ -41,6 +41,13 @@ config AD7152
> Say yes here to build support for Analog Devices capacitive sensors.
> (ad7152, ad7153) Provides direct access via sysfs.
>
> +config AD7291
> + tristate "Analog Devices AD7291 temperature sensor driver"
> + depends on I2C
> + help
> + Say yes here to build support for Analog Devices AD7291
> + temperature sensors.
> +
> config AD799X
> tristate "Analog Devices AD799x ADC driver"
> depends on I2C
> diff --git a/drivers/staging/iio/adc/Makefile b/drivers/staging/iio/adc/Makefile
> index a134754..5e99a86 100644
> --- a/drivers/staging/iio/adc/Makefile
> +++ b/drivers/staging/iio/adc/Makefile
> @@ -17,3 +17,4 @@ obj-$(CONFIG_AD7476) += ad7476.o
>
> obj-$(CONFIG_AD7150) += ad7150.o
> obj-$(CONFIG_AD7152) += ad7152.o
> +obj-$(CONFIG_AD7291) += ad7291.o
> diff --git a/drivers/staging/iio/adc/ad7291.c b/drivers/staging/iio/adc/ad7291.c
> new file mode 100644
> index 0000000..a9d3756
> --- /dev/null
> +++ b/drivers/staging/iio/adc/ad7291.c
> @@ -0,0 +1,1039 @@
> +/*
> + * AD7291 digital temperature sensor driver supporting AD7291
> + *
> + * Copyright 2010 Analog Devices Inc.
> + *
> + * Licensed under the GPL-2 or later.
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/gpio.h>
> +#include <linux/workqueue.h>
> +#include <linux/device.h>
> +#include <linux/kernel.h>
> +#include <linux/slab.h>
> +#include <linux/sysfs.h>
> +#include <linux/list.h>
> +#include <linux/i2c.h>
> +#include <linux/rtc.h>
> +
> +#include "../iio.h"
> +#include "../sysfs.h"
> +
> +/*
> + * AD7291 registers definition
> + */
> +#define AD7291_COMMAND 0
> +#define AD7291_VOLTAGE 1
> +#define AD7291_T_SENSE 2
> +#define AD7291_T_AVERAGE 3
> +#define AD7291_VOLTAGE_LIMIT_BASE 4
> +#define AD7291_VOLTAGE_LIMIT_COUNT 8
> +#define AD7291_T_SENSE_HIGH 0x1c
> +#define AD7291_T_SENSE_LOW 0x1d
> +#define AD7291_T_SENSE_HYST 0x1e
> +#define AD7291_VOLTAGE_ALERT_STATUS 0x1f
> +#define AD7291_T_ALERT_STATUS 0x20
> +
> +/*
> + * AD7291 command
> + */
> +#define AD7291_AUTOCYCLE 0x1
> +#define AD7291_RESET 0x2
> +#define AD7291_ALART_CLEAR 0x4
> +#define AD7291_ALART_POLARITY 0x8
> +#define AD7291_EXT_REF 0x10
> +#define AD7291_NOISE_DELAY 0x20
> +#define AD7291_T_SENSE_MASK 0x40
> +#define AD7291_VOLTAGE_MASK 0xff00
> +#define AD7291_VOLTAGE_OFFSET 0x8
> +
> +/*
> + * AD7291 value masks
> + */
> +#define AD7291_CHANNEL_MASK 0xf000
> +#define AD7291_VALUE_MASK 0xfff
> +#define AD7291_T_VALUE_SIGN 0x400
> +#define AD7291_T_VALUE_FLOAT_OFFSET 2
> +#define AD7291_T_VALUE_FLOAT_MASK 0x2
> +
> +/*
> + * struct ad7291_chip_info - chip specifc information
> + */
> +
> +struct ad7291_chip_info {
> + const char *name;
> + struct i2c_client *client;
> + struct iio_dev *indio_dev;
> + struct work_struct thresh_work;
> + s64 last_timestamp;
> + u16 command;
> + u8 channels; /* Active voltage channels */
> +};
> +
> +/*
> + * struct ad7291_chip_info - chip specifc information
> + */
> +
> +struct ad7291_limit_regs {
> + u16 data_high;
> + u16 data_low;
> + u16 hysteresis;
> +};
> +
> +/*
> + * ad7291 register access by I2C
> + */
> +static int ad7291_i2c_read(struct ad7291_chip_info *chip, u8 reg, u16 *data)
> +{
> + struct i2c_client *client = chip->client;
> + int ret = 0;
> +
> + ret = i2c_smbus_read_word_data(client, reg);
> + if (ret < 0) {
> + dev_err(&client->dev, "I2C read error\n");
> + return ret;
> + }
> +
> + *data = swab16((u16)ret);
> +
> + return 0;
> +}
> +
> +static int ad7291_i2c_write(struct ad7291_chip_info *chip, u8 reg, u16 data)
> +{
> + struct i2c_client *client = chip->client;
> + int ret = 0;
> +
> + ret = i2c_smbus_write_word_data(client, reg, swab16(data));
> + if (ret < 0)
> + dev_err(&client->dev, "I2C write error\n");
> +
> + return ret;
> +}
> +
> +/* Returns negative errno, or else the number of words read. */
> +static int ad7291_i2c_read_data(struct ad7291_chip_info *chip, u8 reg, u16 *data)
> +{
> + struct i2c_client *client = chip->client;
> + u8 commands[4];
> + int ret = 0;
> + int i, count;
> +
> + if (reg == AD7291_T_SENSE || reg == AD7291_T_AVERAGE)
> + count = 2;
> + else if (reg == AD7291_VOLTAGE) {
> + if (!chip->channels) {
> + dev_err(&client->dev, "No voltage channel is selected.\n");
> + return -EINVAL;
> + }
> + count = 2 + chip->channels * 2;
> + } else {
> + dev_err(&client->dev, "I2C wrong data register\n");
> + return -EINVAL;
> + }
> +
> + commands[0] = 0;
> + commands[1] = (chip->command >> 8) & 0xff;
> + commands[2] = chip->command & 0xff;
> + commands[3] = reg;
> +
> + ret = i2c_master_send(client, commands, 4);
> + if (ret < 0) {
> + dev_err(&client->dev, "I2C master send error\n");
> + return ret;
> + }
> +
> + ret = i2c_master_recv(client, (u8 *)data, count);
> + if (ret < 0) {
> + dev_err(&client->dev, "I2C master receive error\n");
> + return ret;
> + }
> + ret >>= 2;
> +
> + for (i = 0; i < ret; i++)
> + data[i] = swab16(data[i]);
> +
> + return ret;
> +}
> +
> +static ssize_t ad7291_show_mode(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct iio_dev *dev_info = dev_get_drvdata(dev);
> + struct ad7291_chip_info *chip = dev_info->dev_data;
> +
> + if (chip->command & AD7291_AUTOCYCLE)
> + return sprintf(buf, "autocycle\n");
> + else
> + return sprintf(buf, "command\n");
> +}
> +
> +static ssize_t ad7291_store_mode(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf,
> + size_t len)
> +{
> + struct iio_dev *dev_info = dev_get_drvdata(dev);
> + struct ad7291_chip_info *chip = dev_info->dev_data;
> + u16 command;
> + int ret;
> +
> + command = chip->command & (~AD7291_AUTOCYCLE);
> + if (strcmp(buf, "autocycle"))
> + command |= AD7291_AUTOCYCLE;
> +
> + ret = ad7291_i2c_write(chip, AD7291_COMMAND, command);
> + if (ret)
> + return -EIO;
> +
> + chip->command = command;
> +
> + return ret;
> +}
> +
> +static IIO_DEVICE_ATTR(mode, S_IRUGO | S_IWUSR,
> + ad7291_show_mode,
> + ad7291_store_mode,
> + 0);
> +
> +static ssize_t ad7291_show_available_modes(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + return sprintf(buf, "command\nautocycle\n");
> +}
> +
> +static IIO_DEVICE_ATTR(available_modes, S_IRUGO, ad7291_show_available_modes, NULL, 0);
> +
> +static ssize_t ad7291_store_reset(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf,
> + size_t len)
> +{
> + struct iio_dev *dev_info = dev_get_drvdata(dev);
> + struct ad7291_chip_info *chip = dev_info->dev_data;
> + u16 command;
> + int ret;
> +
> + command = chip->command | AD7291_RESET;
> +
> + ret = ad7291_i2c_write(chip, AD7291_COMMAND, command);
> + if (ret)
> + return -EIO;
> +
> + return ret;
> +}
> +
> +static IIO_DEVICE_ATTR(reset, S_IWUSR,
> + NULL,
> + ad7291_store_reset,
> + 0);
> +
> +static ssize_t ad7291_show_ext_ref(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct iio_dev *dev_info = dev_get_drvdata(dev);
> + struct ad7291_chip_info *chip = dev_info->dev_data;
> +
> + return sprintf(buf, "%d\n", !!(chip->command & AD7291_EXT_REF));
> +}
> +
> +static ssize_t ad7291_store_ext_ref(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf,
> + size_t len)
> +{
> + struct iio_dev *dev_info = dev_get_drvdata(dev);
> + struct ad7291_chip_info *chip = dev_info->dev_data;
> + u16 command;
> + int ret;
> +
> + command = chip->command & (~AD7291_EXT_REF);
> + if (strcmp(buf, "1"))
> + command |= AD7291_EXT_REF;
> +
> + ret = ad7291_i2c_write(chip, AD7291_COMMAND, command);
> + if (ret)
> + return -EIO;
> +
> + chip->command = command;
> +
> + return ret;
> +}
> +
> +static IIO_DEVICE_ATTR(ext_ref, S_IRUGO | S_IWUSR,
> + ad7291_show_ext_ref,
> + ad7291_store_ext_ref,
> + 0);
> +
> +static ssize_t ad7291_show_noise_delay(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct iio_dev *dev_info = dev_get_drvdata(dev);
> + struct ad7291_chip_info *chip = dev_info->dev_data;
> +
> + return sprintf(buf, "%d\n", !!(chip->command & AD7291_NOISE_DELAY));
> +}
> +
> +static ssize_t ad7291_store_noise_delay(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf,
> + size_t len)
> +{
> + struct iio_dev *dev_info = dev_get_drvdata(dev);
> + struct ad7291_chip_info *chip = dev_info->dev_data;
> + u16 command;
> + int ret;
> +
> + command = chip->command & (~AD7291_NOISE_DELAY);
> + if (strcmp(buf, "1"))
> + command |= AD7291_NOISE_DELAY;
> +
> + ret = ad7291_i2c_write(chip, AD7291_COMMAND, command);
> + if (ret)
> + return -EIO;
> +
> + chip->command = command;
> +
> + return ret;
> +}
> +
> +static IIO_DEVICE_ATTR(noise_delay, S_IRUGO | S_IWUSR,
> + ad7291_show_noise_delay,
> + ad7291_store_noise_delay,
> + 0);
> +
> +static ssize_t ad7291_show_t_sense(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct iio_dev *dev_info = dev_get_drvdata(dev);
> + struct ad7291_chip_info *chip = dev_info->dev_data;
> + u16 data;
> + char sign = ' ';
> + int ret;
> +
> + ret = ad7291_i2c_read_data(chip, AD7291_T_SENSE, &data);
> + if (ret)
> + return -EIO;
> +
> + if (data & AD7291_T_VALUE_SIGN) {
> + /* convert supplement to positive value */
> + data = (AD7291_T_VALUE_SIGN << 1) - data;
> + sign = '-';
> + }
> +
> + return sprintf(buf, "%c%d.%.2d\n", sign,
> + (data >> AD7291_T_VALUE_FLOAT_OFFSET),
> + (data & AD7291_T_VALUE_FLOAT_MASK) * 25);
> +}
> +
> +static IIO_DEVICE_ATTR(t_sense, S_IRUGO, ad7291_show_t_sense, NULL, 0);
> +
> +static ssize_t ad7291_show_t_average(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct iio_dev *dev_info = dev_get_drvdata(dev);
> + struct ad7291_chip_info *chip = dev_info->dev_data;
> + u16 data;
> + char sign = ' ';
> + int ret;
> +
> + ret = ad7291_i2c_read_data(chip, AD7291_T_AVERAGE, &data);
> + if (ret)
> + return -EIO;
> +
> + if (data & AD7291_T_VALUE_SIGN) {
> + /* convert supplement to positive value */
> + data = (AD7291_T_VALUE_SIGN << 1) - data;
> + sign = '-';
> + }
> +
> + return sprintf(buf, "%c%d.%.2d\n", sign,
> + (data >> AD7291_T_VALUE_FLOAT_OFFSET),
> + (data & AD7291_T_VALUE_FLOAT_MASK) * 25);
> +}
> +
> +static IIO_DEVICE_ATTR(t_average, S_IRUGO, ad7291_show_t_average, NULL, 0);
> +
> +static ssize_t ad7291_show_voltage(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct iio_dev *dev_info = dev_get_drvdata(dev);
> + struct ad7291_chip_info *chip = dev_info->dev_data;
> + u16 data[AD7291_VOLTAGE_LIMIT_COUNT];
> + int i, size, ret;
> +
> + ret = ad7291_i2c_read_data(chip, AD7291_VOLTAGE, data);
> + if (ret)
> + return -EIO;
> +
> + for (i = 0; i < AD7291_VOLTAGE_LIMIT_COUNT; i++) {
> + if (chip->command & (AD7291_T_SENSE_MASK << i)) {
> + ret = sprintf(buf, "channel[%d]=%d\n", i,
> + data[i] & AD7291_VALUE_MASK);
> + if (ret < 0)
> + break;
> + buf += ret;
> + size += ret;
> + }
> + }
> +
> + return size;
> +}
> +
> +static IIO_DEVICE_ATTR(voltage, S_IRUGO, ad7291_show_voltage, NULL, 0);
> +
> +static ssize_t ad7291_show_channel_mask(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct iio_dev *dev_info = dev_get_drvdata(dev);
> + struct ad7291_chip_info *chip = dev_info->dev_data;
> +
> + return sprintf(buf, "0x%x\n", (chip->command & AD7291_VOLTAGE_MASK) >>
> + AD7291_VOLTAGE_OFFSET);
> +}
> +
> +static ssize_t ad7291_store_channel_mask(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf,
> + size_t len)
> +{
> + struct iio_dev *dev_info = dev_get_drvdata(dev);
> + struct ad7291_chip_info *chip = dev_info->dev_data;
> + u16 command;
> + unsigned long data;
> + int i, ret;
> +
> + ret = strict_strtoul(buf, 16, &data);
> + if (ret || data > 0xff)
> + return -EINVAL;
> +
> + command = chip->command & (~AD7291_VOLTAGE_MASK);
> + command |= data << AD7291_VOLTAGE_OFFSET;
> +
> + ret = ad7291_i2c_write(chip, AD7291_COMMAND, command);
> + if (ret)
> + return -EIO;
> +
> + chip->command = command;
> +
> + for (i = 0, chip->channels = 0; i < AD7291_VOLTAGE_LIMIT_COUNT; i++) {
> + if (chip->command & (AD7291_T_SENSE_MASK << i))
> + chip->channels++;
> + }
> +
> + return ret;
> +}
> +
> +static IIO_DEVICE_ATTR(channel_mask, S_IRUGO | S_IWUSR,
> + ad7291_show_channel_mask,
> + ad7291_store_channel_mask,
> + 0);
> +
> +static ssize_t ad7291_show_name(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct iio_dev *dev_info = dev_get_drvdata(dev);
> + struct ad7291_chip_info *chip = dev_info->dev_data;
> + return sprintf(buf, "%s\n", chip->name);
> +}
> +
> +static IIO_DEVICE_ATTR(name, S_IRUGO, ad7291_show_name, NULL, 0);
> +
> +static struct attribute *ad7291_attributes[] = {
> + &iio_dev_attr_available_modes.dev_attr.attr,
> + &iio_dev_attr_mode.dev_attr.attr,
> + &iio_dev_attr_reset.dev_attr.attr,
> + &iio_dev_attr_ext_ref.dev_attr.attr,
> + &iio_dev_attr_noise_delay.dev_attr.attr,
> + &iio_dev_attr_t_sense.dev_attr.attr,
> + &iio_dev_attr_t_average.dev_attr.attr,
> + &iio_dev_attr_voltage.dev_attr.attr,
> + &iio_dev_attr_channel_mask.dev_attr.attr,
> + &iio_dev_attr_name.dev_attr.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group ad7291_attribute_group = {
> + .attrs = ad7291_attributes,
> +};
> +
> +/*
> + * temperature bound events
> + */
> +
> +#define IIO_EVENT_CODE_AD7291_T_SENSE_HIGH IIO_BUFFER_EVENT_CODE(0)
> +#define IIO_EVENT_CODE_AD7291_T_SENSE_LOW IIO_BUFFER_EVENT_CODE(1)
> +#define IIO_EVENT_CODE_AD7291_T_AVG_HIGH IIO_BUFFER_EVENT_CODE(2)
> +#define IIO_EVENT_CODE_AD7291_T_AVG_LOW IIO_BUFFER_EVENT_CODE(3)
> +#define IIO_EVENT_CODE_AD7291_VOLTAGE_BASE IIO_BUFFER_EVENT_CODE(4)
> +
> +static void ad7291_interrupt_bh(struct work_struct *work_s)
> +{
> + struct ad7291_chip_info *chip =
> + container_of(work_s, struct ad7291_chip_info, thresh_work);
> + u16 t_status, v_status;
> + u16 command;
> + int i;
> +
> + if (ad7291_i2c_read(chip, AD7291_T_ALERT_STATUS, &t_status))
> + return;
> +
> + if (ad7291_i2c_read(chip, AD7291_VOLTAGE_ALERT_STATUS, &v_status))
> + return;
> +
> + if (!(t_status || v_status))
> + return;
> +
> + command = chip->command | AD7291_ALART_CLEAR;
> + ad7291_i2c_write(chip, AD7291_COMMAND, command);
> +
> + command = chip->command & ~AD7291_ALART_CLEAR;
> + ad7291_i2c_write(chip, AD7291_COMMAND, command);
> +
> + enable_irq(chip->client->irq);
> +
> + for (i = 0; i < 4; i++) {
> + if (t_status & (1 << i))
> + iio_push_event(chip->indio_dev, 0,
> + IIO_EVENT_CODE_AD7291_T_SENSE_HIGH + i,
> + chip->last_timestamp);
> + }
> +
> + for (i = 0; i < AD7291_VOLTAGE_LIMIT_COUNT*2; i++) {
> + if (v_status & (1 << i))
> + iio_push_event(chip->indio_dev, 0,
> + IIO_EVENT_CODE_AD7291_VOLTAGE_BASE + i,
> + chip->last_timestamp);
> + }
> +}
> +
> +static int ad7291_interrupt(struct iio_dev *dev_info,
> + int index,
> + s64 timestamp,
> + int no_test)
> +{
> + struct ad7291_chip_info *chip = dev_info->dev_data;
> +
> + chip->last_timestamp = timestamp;
> + schedule_work(&chip->thresh_work);
> +
> + return 0;
> +}
> +
> +IIO_EVENT_SH(ad7291, &ad7291_interrupt);
> +
> +static inline ssize_t ad7291_show_t_bound(struct device *dev,
> + struct device_attribute *attr,
> + u8 bound_reg,
> + char *buf)
> +{
> + struct iio_dev *dev_info = dev_get_drvdata(dev);
> + struct ad7291_chip_info *chip = dev_info->dev_data;
> + u16 data;
> + char sign = ' ';
> + int ret;
> +
> + ret = ad7291_i2c_read(chip, bound_reg, &data);
> + if (ret)
> + return -EIO;
> +
> + data &= AD7291_VALUE_MASK;
> + if (data & AD7291_T_VALUE_SIGN) {
> + /* convert supplement to positive value */
> + data = (AD7291_T_VALUE_SIGN << 1) - data;
> + sign = '-';
> + }
> +
> + return sprintf(buf, "%c%d.%.2d\n", sign,
> + data >> AD7291_T_VALUE_FLOAT_OFFSET,
> + (data & AD7291_T_VALUE_FLOAT_MASK) * 25);
> +}
> +
> +static inline ssize_t ad7291_set_t_bound(struct device *dev,
> + struct device_attribute *attr,
> + u8 bound_reg,
> + const char *buf,
> + size_t len)
> +{
> + struct iio_dev *dev_info = dev_get_drvdata(dev);
> + struct ad7291_chip_info *chip = dev_info->dev_data;
> + long tmp1, tmp2;
> + u16 data;
> + char *pos;
> + int ret;
> +
> + pos = strchr(buf, '.');
> +
> + ret = strict_strtol(buf, 10, &tmp1);
> +
> + if (ret || tmp1 > 127 || tmp1 < -128)
> + return -EINVAL;
> +
> + if (pos) {
> + len = strlen(pos);
> + if (len > AD7291_T_VALUE_FLOAT_OFFSET)
> + len = AD7291_T_VALUE_FLOAT_OFFSET;
> + pos[len] = 0;
> + ret = strict_strtol(pos, 10, &tmp2);
> +
> + if (!ret)
> + tmp2 = (tmp2 / 25) * 25;
> + }
> +
> + if (tmp1 < 0)
> + data = (u16)(-tmp1);
> + else
> + data = (u16)tmp1;
> + data = (data << AD7291_T_VALUE_FLOAT_OFFSET) |
> + (tmp2 & AD7291_T_VALUE_FLOAT_MASK);
> + if (tmp1 < 0)
> + /* convert positive value to supplyment */
> + data = (AD7291_T_VALUE_SIGN << 1) - data;
> +
> + ret = ad7291_i2c_write(chip, bound_reg, data);
> + if (ret)
> + return -EIO;
> +
> + return ret;
> +}
> +
> +static ssize_t ad7291_show_t_sense_high(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + return ad7291_show_t_bound(dev, attr,
> + AD7291_T_SENSE_HIGH, buf);
> +}
> +
> +static inline ssize_t ad7291_set_t_sense_high(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf,
> + size_t len)
> +{
> + return ad7291_set_t_bound(dev, attr,
> + AD7291_T_SENSE_HIGH, buf, len);
> +}
> +
> +static ssize_t ad7291_show_t_sense_low(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + return ad7291_show_t_bound(dev, attr,
> + AD7291_T_SENSE_LOW, buf);
> +}
> +
> +static inline ssize_t ad7291_set_t_sense_low(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf,
> + size_t len)
> +{
> + return ad7291_set_t_bound(dev, attr,
> + AD7291_T_SENSE_LOW, buf, len);
> +}
> +
> +static ssize_t ad7291_show_t_sense_hyst(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + return ad7291_show_t_bound(dev, attr,
> + AD7291_T_SENSE_HYST, buf);
> +}
> +
> +static inline ssize_t ad7291_set_t_sense_hyst(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf,
> + size_t len)
> +{
> + return ad7291_set_t_bound(dev, attr,
> + AD7291_T_SENSE_HYST, buf, len);
> +}
> +
> +static inline ssize_t ad7291_show_v_bound(struct device *dev,
> + struct device_attribute *attr,
> + u8 bound_reg,
> + char *buf)
> +{
> + struct iio_dev *dev_info = dev_get_drvdata(dev);
> + struct ad7291_chip_info *chip = dev_info->dev_data;
> + u16 data;
> + int ret;
> +
> + if (bound_reg < AD7291_VOLTAGE_LIMIT_BASE ||
> + bound_reg >= AD7291_VOLTAGE_LIMIT_BASE +
> + AD7291_VOLTAGE_LIMIT_COUNT)
> + return -EINVAL;
> +
> + ret = ad7291_i2c_read(chip, bound_reg, &data);
> + if (ret)
> + return -EIO;
> +
> + data &= AD7291_VALUE_MASK;
> +
> + return sprintf(buf, "%d\n", data);
> +}
> +
> +static inline ssize_t ad7291_set_v_bound(struct device *dev,
> + struct device_attribute *attr,
> + u8 bound_reg,
> + const char *buf,
> + size_t len)
> +{
> + struct iio_dev *dev_info = dev_get_drvdata(dev);
> + struct ad7291_chip_info *chip = dev_info->dev_data;
> + unsigned long value;
> + u16 data;
> + int ret;
> +
> + if (bound_reg < AD7291_VOLTAGE_LIMIT_BASE ||
> + bound_reg >= AD7291_VOLTAGE_LIMIT_BASE +
> + AD7291_VOLTAGE_LIMIT_COUNT)
> + return -EINVAL;
> +
> + ret = strict_strtoul(buf, 10, &value);
> +
> + if (ret || value >= 4096)
> + return -EINVAL;
> +
> + data = (u16)value;
> + ret = ad7291_i2c_write(chip, bound_reg, data);
> + if (ret)
> + return -EIO;
> +
> + return ret;
> +}
> +
> +static int ad7291_get_voltage_limit_regs(const char *channel)
> +{
> + int index;
> +
> + if (strlen(channel) < 3 && channel[0] != 'v')
> + return -EINVAL;
> +
> + index = channel[1] - '0';
> + if (index >= AD7291_VOLTAGE_LIMIT_COUNT)
> + return -EINVAL;
> +
> + return index;
> +}
> +
> +static ssize_t ad7291_show_voltage_high(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + int regs;
> +
> + regs = ad7291_get_voltage_limit_regs(attr->attr.name);
> +
> + if (regs < 0)
> + return regs;
> +
> + return ad7291_show_t_bound(dev, attr, regs, buf);
> +}
> +
> +static inline ssize_t ad7291_set_voltage_high(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf,
> + size_t len)
> +{
> + int regs;
> +
> + regs = ad7291_get_voltage_limit_regs(attr->attr.name);
> +
> + if (regs < 0)
> + return regs;
> +
> + return ad7291_set_t_bound(dev, attr, regs, buf, len);
> +}
> +
> +static ssize_t ad7291_show_voltage_low(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + int regs;
> +
> + regs = ad7291_get_voltage_limit_regs(attr->attr.name);
> +
> + if (regs < 0)
> + return regs;
> +
> + return ad7291_show_t_bound(dev, attr, regs+1, buf);
> +}
> +
> +static inline ssize_t ad7291_set_voltage_low(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf,
> + size_t len)
> +{
> + int regs;
> +
> + regs = ad7291_get_voltage_limit_regs(attr->attr.name);
> +
> + if (regs < 0)
> + return regs;
> +
> + return ad7291_set_t_bound(dev, attr, regs+1, buf, len);
> +}
> +
> +static ssize_t ad7291_show_voltage_hyst(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + int regs;
> +
> + regs = ad7291_get_voltage_limit_regs(attr->attr.name);
> +
> + if (regs < 0)
> + return regs;
> +
> + return ad7291_show_t_bound(dev, attr, regs+2, buf);
> +}
> +
> +static inline ssize_t ad7291_set_voltage_hyst(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf,
> + size_t len)
> +{
> + int regs;
> +
> + regs = ad7291_get_voltage_limit_regs(attr->attr.name);
> +
> + if (regs < 0)
> + return regs;
> +
> + return ad7291_set_t_bound(dev, attr, regs+2, buf, len);
> +}
> +
> +IIO_EVENT_ATTR_SH(t_sense_high, iio_event_ad7291,
> + ad7291_show_t_sense_high, ad7291_set_t_sense_high, 0);
> +IIO_EVENT_ATTR_SH(t_sense_low, iio_event_ad7291,
> + ad7291_show_t_sense_low, ad7291_set_t_sense_low, 0);
> +IIO_EVENT_ATTR_SH(t_sense_hyst, iio_event_ad7291,
> + ad7291_show_t_sense_hyst, ad7291_set_t_sense_hyst, 0);
> +
> +IIO_EVENT_ATTR_SH(v0_high, iio_event_ad7291,
> + ad7291_show_voltage_high, ad7291_set_voltage_high, 0);
> +IIO_EVENT_ATTR_SH(v0_low, iio_event_ad7291,
> + ad7291_show_voltage_low, ad7291_set_voltage_low, 0);
> +IIO_EVENT_ATTR_SH(v0_hyst, iio_event_ad7291,
> + ad7291_show_voltage_hyst, ad7291_set_voltage_hyst, 0);
> +IIO_EVENT_ATTR_SH(v1_high, iio_event_ad7291,
> + ad7291_show_voltage_high, ad7291_set_voltage_high, 0);
> +IIO_EVENT_ATTR_SH(v1_low, iio_event_ad7291,
> + ad7291_show_voltage_low, ad7291_set_voltage_low, 0);
> +IIO_EVENT_ATTR_SH(v1_hyst, iio_event_ad7291,
> + ad7291_show_voltage_hyst, ad7291_set_voltage_hyst, 0);
> +IIO_EVENT_ATTR_SH(v2_high, iio_event_ad7291,
> + ad7291_show_voltage_high, ad7291_set_voltage_high, 0);
> +IIO_EVENT_ATTR_SH(v2_low, iio_event_ad7291,
> + ad7291_show_voltage_low, ad7291_set_voltage_low, 0);
> +IIO_EVENT_ATTR_SH(v2_hyst, iio_event_ad7291,
> + ad7291_show_voltage_hyst, ad7291_set_voltage_hyst, 0);
> +IIO_EVENT_ATTR_SH(v3_high, iio_event_ad7291,
> + ad7291_show_voltage_high, ad7291_set_voltage_high, 0);
> +IIO_EVENT_ATTR_SH(v3_low, iio_event_ad7291,
> + ad7291_show_voltage_low, ad7291_set_voltage_low, 0);
> +IIO_EVENT_ATTR_SH(v3_hyst, iio_event_ad7291,
> + ad7291_show_voltage_hyst, ad7291_set_voltage_hyst, 0);
> +IIO_EVENT_ATTR_SH(v4_high, iio_event_ad7291,
> + ad7291_show_voltage_high, ad7291_set_voltage_high, 0);
> +IIO_EVENT_ATTR_SH(v4_low, iio_event_ad7291,
> + ad7291_show_voltage_low, ad7291_set_voltage_low, 0);
> +IIO_EVENT_ATTR_SH(v4_hyst, iio_event_ad7291,
> + ad7291_show_voltage_hyst, ad7291_set_voltage_hyst, 0);
> +IIO_EVENT_ATTR_SH(v5_high, iio_event_ad7291,
> + ad7291_show_voltage_high, ad7291_set_voltage_high, 0);
> +IIO_EVENT_ATTR_SH(v5_low, iio_event_ad7291,
> + ad7291_show_voltage_low, ad7291_set_voltage_low, 0);
> +IIO_EVENT_ATTR_SH(v5_hyst, iio_event_ad7291,
> + ad7291_show_voltage_hyst, ad7291_set_voltage_hyst, 0);
> +IIO_EVENT_ATTR_SH(v6_high, iio_event_ad7291,
> + ad7291_show_voltage_high, ad7291_set_voltage_high, 0);
> +IIO_EVENT_ATTR_SH(v6_low, iio_event_ad7291,
> + ad7291_show_voltage_low, ad7291_set_voltage_low, 0);
> +IIO_EVENT_ATTR_SH(v6_hyst, iio_event_ad7291,
> + ad7291_show_voltage_hyst, ad7291_set_voltage_hyst, 0);
> +IIO_EVENT_ATTR_SH(v7_high, iio_event_ad7291,
> + ad7291_show_voltage_high, ad7291_set_voltage_high, 0);
> +IIO_EVENT_ATTR_SH(v7_low, iio_event_ad7291,
> + ad7291_show_voltage_low, ad7291_set_voltage_low, 0);
> +IIO_EVENT_ATTR_SH(v7_hyst, iio_event_ad7291,
> + ad7291_show_voltage_hyst, ad7291_set_voltage_hyst, 0);
> +
> +static struct attribute *ad7291_event_attributes[] = {
> + &iio_event_attr_t_sense_high.dev_attr.attr,
> + &iio_event_attr_t_sense_low.dev_attr.attr,
> + &iio_event_attr_t_sense_hyst.dev_attr.attr,
> + &iio_event_attr_v0_high.dev_attr.attr,
> + &iio_event_attr_v0_low.dev_attr.attr,
> + &iio_event_attr_v0_hyst.dev_attr.attr,
> + &iio_event_attr_v1_high.dev_attr.attr,
> + &iio_event_attr_v1_low.dev_attr.attr,
> + &iio_event_attr_v1_hyst.dev_attr.attr,
> + &iio_event_attr_v2_high.dev_attr.attr,
> + &iio_event_attr_v2_low.dev_attr.attr,
> + &iio_event_attr_v2_hyst.dev_attr.attr,
> + &iio_event_attr_v3_high.dev_attr.attr,
> + &iio_event_attr_v3_low.dev_attr.attr,
> + &iio_event_attr_v3_hyst.dev_attr.attr,
> + &iio_event_attr_v4_high.dev_attr.attr,
> + &iio_event_attr_v4_low.dev_attr.attr,
> + &iio_event_attr_v4_hyst.dev_attr.attr,
> + &iio_event_attr_v5_high.dev_attr.attr,
> + &iio_event_attr_v5_low.dev_attr.attr,
> + &iio_event_attr_v5_hyst.dev_attr.attr,
> + &iio_event_attr_v6_high.dev_attr.attr,
> + &iio_event_attr_v6_low.dev_attr.attr,
> + &iio_event_attr_v6_hyst.dev_attr.attr,
> + &iio_event_attr_v7_high.dev_attr.attr,
> + &iio_event_attr_v7_low.dev_attr.attr,
> + &iio_event_attr_v7_hyst.dev_attr.attr,
> + NULL,
> +};
> +
> +static struct attribute_group ad7291_event_attribute_group = {
> + .attrs = ad7291_event_attributes,
> +};
> +
> +/*
> + * device probe and remove
> + */
> +
> +static int __devinit ad7291_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct ad7291_chip_info *chip;
> + int ret = 0;
> +
> + chip = kzalloc(sizeof(struct ad7291_chip_info), GFP_KERNEL);
> +
> + if (chip == NULL)
> + return -ENOMEM;
> +
> + /* this is only used for device removal purposes */
> + i2c_set_clientdata(client, chip);
> +
> + chip->client = client;
> + chip->name = id->name;
> + chip->command = AD7291_NOISE_DELAY | AD7291_T_SENSE_MASK;
> +
> + chip->indio_dev = iio_allocate_device();
> + if (chip->indio_dev == NULL) {
> + ret = -ENOMEM;
> + goto error_free_chip;
> + }
> +
> + chip->indio_dev->dev.parent = &client->dev;
> + chip->indio_dev->attrs = &ad7291_attribute_group;
> + chip->indio_dev->event_attrs = &ad7291_event_attribute_group;
> + chip->indio_dev->dev_data = (void *)chip;
> + chip->indio_dev->driver_module = THIS_MODULE;
> + chip->indio_dev->num_interrupt_lines = 1;
> + chip->indio_dev->modes = INDIO_DIRECT_MODE;
> +
> + ret = iio_device_register(chip->indio_dev);
> + if (ret)
> + goto error_free_dev;
> +
> + if (client->irq > 0) {
> + ret = iio_register_interrupt_line(client->irq,
> + chip->indio_dev,
> + 0,
> + client->irq_flags,
> + chip->name);
> + if (ret)
> + goto error_unreg_dev;
> +
> + /*
> + * The event handler list element refer to iio_event_ad7291.
> + * All event attributes bind to the same event handler.
> + * So, only register event handler once.
> + */
> + iio_add_event_to_list(&iio_event_ad7291,
> + &chip->indio_dev->interrupts[0]->ev_list);
> +
> + INIT_WORK(&chip->thresh_work, ad7291_interrupt_bh);
> +
> + if (client->irq_flags & IRQF_TRIGGER_LOW)
> + chip->command |= AD7291_ALART_POLARITY;
> + }
> +
> + ret = ad7291_i2c_write(chip, AD7291_COMMAND, chip->command);
> + if (ret) {
> + ret = -EIO;
> + goto error_unreg_irq;
> + }
> +
> + dev_info(&client->dev, "%s temperature sensor registered.\n",
> + id->name);
> +
> + return 0;
> +
> +error_unreg_irq:
> + iio_unregister_interrupt_line(chip->indio_dev, 0);
> +error_unreg_dev:
> + iio_device_unregister(chip->indio_dev);
> +error_free_dev:
> + iio_free_device(chip->indio_dev);
> +error_free_chip:
> + kfree(chip);
> +
> + return ret;
> +}
> +
> +static int __devexit ad7291_remove(struct i2c_client *client)
> +{
> + struct ad7291_chip_info *chip = i2c_get_clientdata(client);
> + struct iio_dev *indio_dev = chip->indio_dev;
> +
> + if (client->irq)
> + iio_unregister_interrupt_line(indio_dev, 0);
> + iio_device_unregister(indio_dev);
> + iio_free_device(chip->indio_dev);
> + kfree(chip);
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id ad7291_id[] = {
> + { "ad7291", 0 },
> + {}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, ad7291_id);
> +
> +static struct i2c_driver ad7291_driver = {
> + .driver = {
> + .name = "ad7291",
> + },
> + .probe = ad7291_probe,
> + .remove = __devexit_p(ad7291_remove),
> + .id_table = ad7291_id,
> +};
> +
> +static __init int ad7291_init(void)
> +{
> + return i2c_add_driver(&ad7291_driver);
> +}
> +
> +static __exit void ad7291_exit(void)
> +{
> + i2c_del_driver(&ad7291_driver);
> +}
> +
> +MODULE_AUTHOR("Sonic Zhang <sonic.zhang@analog.com>");
> +MODULE_DESCRIPTION("Analog Devices AD7291 digital"
> + " temperature sensor driver");
> +MODULE_LICENSE("GPL v2");
> +
> +module_init(ad7291_init);
> +module_exit(ad7291_exit);
next prev parent reply other threads:[~2010-10-25 13:35 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-24 21:22 [PATCH 00/36] staging: iio: ADI drivers for staging-next Mike Frysinger
2010-10-24 21:22 ` [PATCH 01/36] staging: iio: new adis16201 driver Mike Frysinger
2010-10-24 21:22 ` [PATCH 02/36] staging: iio: new adis16203 driver Mike Frysinger
2010-10-24 21:22 ` [PATCH 03/36] staging: iio: new adis16204 driver Mike Frysinger
2010-10-24 21:22 ` [PATCH 04/36] staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver Mike Frysinger
2010-10-24 21:22 ` [PATCH 05/36] staging: iio: adc: new driver for AD7150/1/6 devices Mike Frysinger
2010-10-24 21:22 ` [PATCH 06/36] staging: iio: adc: new driver for AD7152/3 devices Mike Frysinger
2010-10-24 21:22 ` [PATCH 07/36] staging: iio: adc: new driver for AD7291 devices Mike Frysinger
2010-10-25 13:41 ` Jonathan Cameron [this message]
2010-10-25 13:40 ` BUILD ISSUE: " Hennerich, Michael
2010-10-25 14:00 ` Jonathan Cameron
2010-10-24 21:22 ` [PATCH 08/36] staging: iio: adc: new driver for AD7298 devices Mike Frysinger
2010-10-24 21:22 ` [PATCH 09/36] staging: iio: adc: new driver for AD7314 devices Mike Frysinger
2010-10-24 21:22 ` [PATCH 10/36] staging: iio: adc: new driver for AD7414/5 devices Mike Frysinger
2010-10-24 21:22 ` [PATCH 11/36] staging: iio: adc: new driver for AD7416/7/8 devices Mike Frysinger
2010-10-24 21:22 ` [PATCH 12/36] staging: iio: adc: new driver for AD7745/6/7 devices Mike Frysinger
2010-10-24 21:22 ` [PATCH 13/36] staging: iio: adc: new driver for AD7816 devices Mike Frysinger
2010-10-24 21:22 ` [PATCH 14/36] staging: iio: adc: new driver for ADT75 temperature sensors Mike Frysinger
2010-10-24 21:22 ` [PATCH 15/36] staging: iio: adc: new driver for ADT7310 " Mike Frysinger
2010-10-24 21:22 ` [PATCH 16/36] staging: iio: adc: new driver for ADT7408 " Mike Frysinger
2010-10-24 21:22 ` [PATCH 17/36] staging: iio: adc: new driver for ADT7410 " Mike Frysinger
2010-10-24 21:22 ` [PATCH 18/36] staging: iio: gyro: new driver for ADIS16261 devices Mike Frysinger
2010-10-24 21:22 ` [PATCH 19/36] staging: iio: gyro: new driver for ADIS16060 digital output gyros Mike Frysinger
2010-10-24 21:22 ` [PATCH 20/36] staging: iio: gyro: new driver for ADIS16080 " Mike Frysinger
2010-10-24 21:22 ` [PATCH 21/36] staging: iio: gyro: new driver for ADIS16130 " Mike Frysinger
2010-10-24 21:22 ` [PATCH 22/36] staging: iio: dac: new driver for AD5624R devices Mike Frysinger
2010-10-24 21:22 ` [PATCH 23/36] staging: iio: dds: new driver for AD5930/2 devices Mike Frysinger
2010-10-24 21:22 ` [PATCH 24/36] staging: iio: dds: new driver for AD9832/3/4/5 devices Mike Frysinger
2010-10-24 21:22 ` [PATCH 25/36] staging: iio: dds: new driver for AD9850/1 devices Mike Frysinger
2010-10-24 21:22 ` [PATCH 26/36] staging: iio: dds: new driver for AD9852/4 devices Mike Frysinger
2010-10-24 21:22 ` [PATCH 27/36] staging: iio: dds: new driver for AD9910 devices Mike Frysinger
2010-10-24 21:22 ` [PATCH 28/36] staging: iio: dds: new driver for AD9951 devices Mike Frysinger
2010-10-24 21:22 ` [PATCH 29/36] staging: iio: meter: new driver for ADE7753/6 devices Mike Frysinger
2010-10-24 21:22 ` [PATCH 30/36] staging: iio: meter: new driver for ADE7754 devices Mike Frysinger
2010-10-24 21:22 ` [PATCH 31/36] staging: iio: meter: new driver for ADE7758 devices Mike Frysinger
2010-10-24 21:22 ` [PATCH 32/36] staging: iio: meter: new driver for ADE7759 devices Mike Frysinger
2010-10-24 21:22 ` [PATCH 33/36] staging: iio: meter: new driver for ADE7854/58/68/78 devices Mike Frysinger
2010-10-24 21:22 ` [PATCH 34/36] staging: iio: resolver: new driver for AD2S90 devices Mike Frysinger
2010-10-24 21:22 ` [PATCH 35/36] staging: iio: resolver: new driver for AD2S1200/1205 devices Mike Frysinger
2010-10-24 21:22 ` [PATCH 36/36] staging: iio: resolver: new driver for AD2S1210 devices Mike Frysinger
2010-10-24 21:35 ` [Device-drivers-devel] [PATCH 00/36] staging: iio: ADI drivers for staging-next Mike Frysinger
2010-10-24 23:41 ` Jonathan Cameron
2010-10-24 23:35 ` Jonathan Cameron
2010-10-24 23:45 ` [Device-drivers-devel] " Mike Frysinger
2010-10-25 8:39 ` Hennerich, Michael
2010-10-25 10:05 ` Jonathan Cameron
2010-10-25 10:35 ` Jonathan Cameron
2010-10-25 10:40 ` Hennerich, Michael
2010-10-26 0:53 ` Mike Frysinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CC58904.9010401@cam.ac.uk \
--to=jic23@cam.ac.uk \
--cc=device-drivers-devel@blackfin.uclinux.org \
--cc=linux-iio@vger.kernel.org \
--cc=sonic.zhang@analog.com \
--cc=vapier@gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox