From: Jonathan Cameron <jic23@cam.ac.uk>
To: michael.hennerich@analog.com
Cc: linux-iio@vger.kernel.org, drivers@analog.com,
device-drivers-devel@blackfin.uclinux.org
Subject: Re: [PATCH] IIO: DDS: AD9834: Add support for AD9837 and AD9838 DDS devices
Date: Wed, 27 Apr 2011 16:28:30 +0100 [thread overview]
Message-ID: <4DB8361E.3010705@cam.ac.uk> (raw)
In-Reply-To: <1303917101-17957-1-git-send-email-michael.hennerich@analog.com>
On 04/27/11 16:11, michael.hennerich@analog.com wrote:
> From: Michael Hennerich <michael.hennerich@analog.com>
>
> Add support for AD9837 and AD9838 DDS devices
> Update copyright and license notice
> Fix typo
>
Looks straight forward...
> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
> ---
> drivers/staging/iio/dds/Kconfig | 4 ++--
> drivers/staging/iio/dds/ad9834.c | 31 ++++++++++++++++---------------
> drivers/staging/iio/dds/ad9834.h | 8 +++++---
> 3 files changed, 23 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/staging/iio/dds/Kconfig b/drivers/staging/iio/dds/Kconfig
> index 06b6f3a..e07431d 100644
> --- a/drivers/staging/iio/dds/Kconfig
> +++ b/drivers/staging/iio/dds/Kconfig
> @@ -21,11 +21,11 @@ config AD9832
> module will be called ad9832.
>
> config AD9834
> - tristate "Analog Devices ad9833/4/ driver"
> + tristate "Analog Devices AD9833/4/7/8 driver"
> depends on SPI
> help
> Say yes here to build support for Analog Devices DDS chip
> - AD9833 and AD9834, provides direct access via sysfs.
> + AD9833, AD9834, AD9837 and AD9838, provides direct access via sysfs.
>
> To compile this driver as a module, choose M here: the
> module will be called ad9834.
> diff --git a/drivers/staging/iio/dds/ad9834.c b/drivers/staging/iio/dds/ad9834.c
> index da5e302..6dbc458 100644
> --- a/drivers/staging/iio/dds/ad9834.c
> +++ b/drivers/staging/iio/dds/ad9834.c
> @@ -1,9 +1,9 @@
> /*
> - * AD9834 SPI DAC driver
> + * AD9833/AD9834/AD9837/AD9838 SPI DDS driver
> *
> - * Copyright 2010 Analog Devices Inc.
> + * Copyright 2010-2011 Analog Devices Inc.
> *
> - * Licensed under the GPL-2 or later.
> + * Licensed under the GPL-2.
> */
>
> #include <linux/interrupt.h>
> @@ -47,7 +47,7 @@ static int ad9834_write_frequency(struct ad9834_state *st,
> (AD9834_FREQ_BITS / 2)) &
> RES_MASK(AD9834_FREQ_BITS / 2)));
>
> - return spi_sync(st->spi, &st->freq_msg);;
> + return spi_sync(st->spi, &st->freq_msg);
> }
>
> static int ad9834_write_phase(struct ad9834_state *st,
> @@ -148,7 +148,7 @@ static ssize_t ad9834_store_wavetype(struct device *dev,
> struct ad9834_state *st = dev_info->dev_data;
> struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
> int ret = 0;
> - bool is_ad9833 = st->devid == ID_AD9833;
> + bool is_ad9833_7 = (st->devid == ID_AD9833) || (st->devid == ID_AD9837);
>
> mutex_lock(&dev_info->mlock);
>
> @@ -156,10 +156,10 @@ static ssize_t ad9834_store_wavetype(struct device *dev,
> case 0:
> if (sysfs_streq(buf, "sine")) {
> st->control &= ~AD9834_MODE;
> - if (is_ad9833)
> + if (is_ad9833_7)
> st->control &= ~AD9834_OPBITEN;
> } else if (sysfs_streq(buf, "triangle")) {
> - if (is_ad9833) {
> + if (is_ad9833_7) {
> st->control &= ~AD9834_OPBITEN;
> st->control |= AD9834_MODE;
> } else if (st->control & AD9834_OPBITEN) {
> @@ -167,7 +167,7 @@ static ssize_t ad9834_store_wavetype(struct device *dev,
> } else {
> st->control |= AD9834_MODE;
> }
> - } else if (is_ad9833 && sysfs_streq(buf, "square")) {
> + } else if (is_ad9833_7 && sysfs_streq(buf, "square")) {
> st->control &= ~AD9834_MODE;
> st->control |= AD9834_OPBITEN;
> } else {
> @@ -217,7 +217,7 @@ static ssize_t ad9834_show_out0_wavetype_available(struct device *dev,
> struct ad9834_state *st = iio_dev_get_devdata(dev_info);
> char *str;
>
> - if (st->devid == ID_AD9833)
> + if ((st->devid == ID_AD9833) || (st->devid == ID_AD9837))
> str = "sine triangle square";
> else if (st->control & AD9834_OPBITEN)
> str = "sine";
> @@ -301,13 +301,12 @@ static mode_t ad9834_attr_is_visible(struct kobject *kobj,
>
> mode_t mode = attr->mode;
>
> - if (st->devid == ID_AD9834)
> - return mode;
> -
> - if ((attr == &iio_dev_attr_dds0_out1_enable.dev_attr.attr) ||
> + if (((st->devid == ID_AD9833) || (st->devid == ID_AD9837)) &&
> + ((attr == &iio_dev_attr_dds0_out1_enable.dev_attr.attr) ||
> (attr == &iio_dev_attr_dds0_out1_wavetype.dev_attr.attr) ||
> (attr ==
> - &iio_dev_attr_dds0_out1_wavetype_available.dev_attr.attr))
> + &iio_dev_attr_dds0_out1_wavetype_available.dev_attr.attr) ||
> + (attr == &iio_dev_attr_dds0_pincontrol_en.dev_attr.attr)))
> mode = 0;
>
> return mode;
> @@ -445,6 +444,8 @@ static int __devexit ad9834_remove(struct spi_device *spi)
> static const struct spi_device_id ad9834_id[] = {
> {"ad9833", ID_AD9833},
> {"ad9834", ID_AD9834},
> + {"ad9837", ID_AD9837},
> + {"ad9838", ID_AD9838},
> {}
> };
>
> @@ -472,6 +473,6 @@ static void __exit ad9834_exit(void)
> module_exit(ad9834_exit);
>
> MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
> -MODULE_DESCRIPTION("Analog Devices AD9833/AD9834 DDS");
> +MODULE_DESCRIPTION("Analog Devices AD9833/AD9834/AD9837/AD9838 DDS");
> MODULE_LICENSE("GPL v2");
> MODULE_ALIAS("spi:ad9834");
> diff --git a/drivers/staging/iio/dds/ad9834.h b/drivers/staging/iio/dds/ad9834.h
> index 0fc3b88..2abd635 100644
> --- a/drivers/staging/iio/dds/ad9834.h
> +++ b/drivers/staging/iio/dds/ad9834.h
> @@ -1,9 +1,9 @@
> /*
> - * AD9834 SPI DDS driver
> + * AD9833/AD9834/AD9837/AD9838 SPI DDS driver
> *
> - * Copyright 2010 Analog Devices Inc.
> + * Copyright 2010-2011 Analog Devices Inc.
> *
> - * Licensed under the GPL-2 or later.
> + * Licensed under the GPL-2.
> */
> #ifndef IIO_DDS_AD9834_H_
> #define IIO_DDS_AD9834_H_
> @@ -107,6 +107,8 @@ struct ad9834_platform_data {
> enum ad9834_supported_device_ids {
> ID_AD9833,
> ID_AD9834,
> + ID_AD9837,
> + ID_AD9838,
> };
>
> #endif /* IIO_DDS_AD9834_H_ */
next prev parent reply other threads:[~2011-04-27 15:26 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-27 15:11 [PATCH] IIO: DDS: AD9834: Add support for AD9837 and AD9838 DDS devices michael.hennerich
2011-04-27 15:28 ` Jonathan Cameron [this message]
-- strict thread matches above, loose matches on Subject: below --
2011-04-27 15:22 michael.hennerich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DB8361E.3010705@cam.ac.uk \
--to=jic23@cam.ac.uk \
--cc=device-drivers-devel@blackfin.uclinux.org \
--cc=drivers@analog.com \
--cc=linux-iio@vger.kernel.org \
--cc=michael.hennerich@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox