From: Jonathan Cameron <jic23@cam.ac.uk>
To: Jonathan Cameron <jic23@cam.ac.uk>
Cc: linux-iio@vger.kernel.org, manuel.stahl@iis.fraunhofer.de,
jonathan.kunkee@gmail.com, michael.hennerich@analog.com
Subject: Re: [PATCH 2/3] staging:iio:dummy Add event support + fake event generator
Date: Wed, 21 Sep 2011 10:59:35 +0100 [thread overview]
Message-ID: <4E79B587.70107@cam.ac.uk> (raw)
In-Reply-To: <1316534313-20212-3-git-send-email-jic23@cam.ac.uk>
On 09/20/11 16:58, Jonathan Cameron wrote:
> The event generator is not very pretty but does the job and
> allows this driver to look a lot more like a normal driver
> than it otherwise would.
Clearly the iio_core changes have no place in here. Those should
have been in a different patch entirely. So please ignore them
in any review.
>
> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
> ---
> drivers/staging/iio/Kconfig | 20 ++-
> drivers/staging/iio/Makefile | 6 +-
> drivers/staging/iio/iio_core.h | 6 +-
> drivers/staging/iio/iio_dummy_evgen.c | 217 +++++++++++++++++++++++++
> drivers/staging/iio/iio_dummy_evgen.h | 2 +
> drivers/staging/iio/iio_simple_dummy.c | 50 ++++---
> drivers/staging/iio/iio_simple_dummy.h | 81 +++++++++
> drivers/staging/iio/iio_simple_dummy_events.c | 190 ++++++++++++++++++++++
> 8 files changed, 543 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig
> index 0accc21..75128a0 100644
> --- a/drivers/staging/iio/Kconfig
> +++ b/drivers/staging/iio/Kconfig
> @@ -70,12 +70,26 @@ source "drivers/staging/iio/meter/Kconfig"
> source "drivers/staging/iio/resolver/Kconfig"
> source "drivers/staging/iio/trigger/Kconfig"
>
> +config IIO_DUMMY_EVGEN
> + tristate
> +
> config IIO_SIMPLE_DUMMY
> tristate "An example driver with no hardware requirements"
> + select IIO_SIMPLE_DUMMY_EVGEN if IIO_SIMPLE_DUMMY_EVENTS
> help
> - Driver intended mainly as documentation for how to write
> - a driver. May also be useful for testing userspace code
> - without hardward.
> + Driver intended mainly as documentation for how to write
> + a driver. May also be useful for testing userspace code
> + without hardward.
> +
> +if IIO_SIMPLE_DUMMY
> +
> +config IIO_SIMPLE_DUMMY_EVENTS
> + boolean "Event generation support"
> + select IIO_DUMMY_EVGEN
> + help
> + Add some dummy events to the simple dummy driver.
> +
>
> +endif # IIO_SIMPLE_DUMMY
>
> endif # IIO
> diff --git a/drivers/staging/iio/Makefile b/drivers/staging/iio/Makefile
> index 014d8f1..75aacfd 100644
> --- a/drivers/staging/iio/Makefile
> +++ b/drivers/staging/iio/Makefile
> @@ -10,7 +10,11 @@ industrialio-$(CONFIG_IIO_TRIGGER) += industrialio-trigger.o
> obj-$(CONFIG_IIO_SW_RING) += ring_sw.o
> obj-$(CONFIG_IIO_KFIFO_BUF) += kfifo_buf.o
>
> -obj-$(CONFIG_IIO_SIMPLE_DUMMY) += iio_simple_dummy.o
> +obj-$(CONFIG_IIO_SIMPLE_DUMMY) += iio_dummy.o
> +iio_dummy-y := iio_simple_dummy.o
> +iio_dummy-$(CONFIG_IIO_SIMPLE_DUMMY_EVENTS) += iio_simple_dummy_events.o
> +
> +obj-$(CONFIG_IIO_DUMMY_EVGEN) += iio_dummy_evgen.o
>
> obj-y += accel/
> obj-y += adc/
> diff --git a/drivers/staging/iio/iio_core.h b/drivers/staging/iio/iio_core.h
> index dde9e3e..0743f39 100644
> --- a/drivers/staging/iio/iio_core.h
> +++ b/drivers/staging/iio/iio_core.h
> @@ -33,7 +33,7 @@ int __iio_add_chan_devattr(const char *postfix,
> #ifdef CONFIG_IIO_BUFFER
> struct poll_table_struct;
>
> -void iio_chrdev_buffer_open(struct iio_dev *indio_dev);
> +int iio_chrdev_buffer_open(struct iio_dev *indio_dev);
> void iio_chrdev_buffer_release(struct iio_dev *indio_dev);
>
> unsigned int iio_buffer_poll(struct file *filp,
> @@ -47,8 +47,8 @@ ssize_t iio_buffer_read_first_n_outer(struct file *filp, char __user *buf,
>
> #else
>
> -static inline void iio_chrdev_buffer_open(struct iio_dev *indio_dev)
> -{}
> +static inline int iio_chrdev_buffer_open(struct iio_dev *indio_dev)
> +{ return -EINVAL; }
> static inline void iio_chrdev_buffer_release(struct iio_dev *indio_dev)
> {}
>
> diff --git a/drivers/staging/iio/iio_dummy_evgen.c b/drivers/staging/iio/iio_dummy_evgen.c
> new file mode 100644
> index 0000000..da657d1
> --- /dev/null
> +++ b/drivers/staging/iio/iio_dummy_evgen.c
> @@ -0,0 +1,217 @@
> +/**
> + * Copyright (c) 2011 Jonathan Cameron
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * Companion module to the iio simple dummy example driver.
> + * The purpose of this is to generate 'fake' event interrupts thus
> + * allowing that driver's code to be as close as possible to that of
> + * a normal driver talking to hardware. The approach used here
> + * is not intended to be general and just happens to work for this
> + * particular use case.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/slab.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/mutex.h>
> +#include <linux/module.h>
> +#include <linux/sysfs.h>
> +
> +#include "iio_dummy_evgen.h"
> +#include "iio.h"
> +#include "sysfs.h"
> +
> +/* Fiddly bit of faking and irq without hardware */
> +#define IIO_EVENTGEN_NO 10
> +/**
> + * struct iio_dummy_evgen - evgen state
> + * @chip: irq chip we are faking
> + * @base: base of irq range
> + * @enabled: mask of which irqs are enabled
> + * @inuse: mask of which irqs actually have anyone connected
> + * @lock: protect the evgen state
> + */
> +struct iio_dummy_eventgen {
> + struct irq_chip chip;
> + int base;
> + bool enabled[IIO_EVENTGEN_NO];
> + bool inuse[IIO_EVENTGEN_NO];
> + struct mutex lock;
> +};
> +
> +/* We can only ever have one instance of this 'device' */
> +static struct iio_dummy_eventgen *iio_evgen;
> +static const char *iio_evgen_name = "iio_dummy_evgen";
> +
> +static void iio_dummy_event_irqmask(struct irq_data *d)
> +{
> + struct irq_chip *chip = irq_data_get_irq_chip(d);
> + struct iio_dummy_eventgen *evgen =
> + container_of(chip, struct iio_dummy_eventgen, chip);
> +
> + evgen->enabled[d->irq - evgen->base] = false;
> +}
> +
> +static void iio_dummy_event_irqunmask(struct irq_data *d)
> +{
> + struct irq_chip *chip = irq_data_get_irq_chip(d);
> + struct iio_dummy_eventgen *evgen =
> + container_of(chip, struct iio_dummy_eventgen, chip);
> +
> + evgen->enabled[d->irq - evgen->base] = true;
> +}
> +
> +static int iio_dummy_evgen_create(void)
> +{
> + int ret, i;
> +
> + iio_evgen = kzalloc(sizeof(*iio_evgen), GFP_KERNEL);
> + if (iio_evgen == NULL)
> + return -ENOMEM;
> +
> + iio_evgen->base = irq_alloc_descs(-1, 0, IIO_EVENTGEN_NO, 0);
> + if (iio_evgen->base < 0) {
> + ret = iio_evgen->base;
> + kfree(iio_evgen);
> + return ret;
> + }
> + iio_evgen->chip.name = iio_evgen_name;
> + iio_evgen->chip.irq_mask = &iio_dummy_event_irqmask;
> + iio_evgen->chip.irq_unmask = &iio_dummy_event_irqunmask;
> + for (i = 0; i < IIO_EVENTGEN_NO; i++) {
> + irq_set_chip(iio_evgen->base + i, &iio_evgen->chip);
> + irq_set_handler(iio_evgen->base + i, &handle_simple_irq);
> + irq_modify_status(iio_evgen->base + i,
> + IRQ_NOREQUEST | IRQ_NOAUTOEN,
> + IRQ_NOPROBE);
> + }
> + mutex_init(&iio_evgen->lock);
> + return 0;
> +}
> +
> +/**
> + * iio_dummy_evgen_get_irq() - get an evgen provided irq for a device
> + *
> + * This function will give a free allocated irq to a client device.
> + * That irq can then be caused to 'fire' by using the associated sysfs file.
> + */
> +int iio_dummy_evgen_get_irq(void)
> +{
> + int i, ret = 0;
> + mutex_lock(&iio_evgen->lock);
> + for (i = 0; i < IIO_EVENTGEN_NO; i++)
> + if (iio_evgen->inuse[i] == false) {
> + ret = iio_evgen->base + i;
> + iio_evgen->inuse[i] = true;
> + break;
> + }
> + mutex_unlock(&iio_evgen->lock);
> + if (i == IIO_EVENTGEN_NO)
> + return -ENOMEM;
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(iio_dummy_evgen_get_irq);
> +
> +/**
> + * iio_dummy_evgen_release_irq() - give the irq back.
> + * @irq: irq being returned to the pool
> + *
> + * Used by client driver instances to give the irqs back when they disconnect
> + */
> +int iio_dummy_evgen_release_irq(int irq)
> +{
> + mutex_lock(&iio_evgen->lock);
> + iio_evgen->inuse[irq - iio_evgen->base] = false;
> + mutex_unlock(&iio_evgen->lock);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(iio_dummy_evgen_release_irq);
> +
> +static void iio_dummy_evgen_free(void)
> +{
> + irq_free_descs(iio_evgen->base, IIO_EVENTGEN_NO);
> + kfree(iio_evgen);
> +}
> +
> +static void iio_evgen_release(struct device *dev)
> +{
> + iio_dummy_evgen_free();
> +}
> +
> +static ssize_t iio_evgen_poke(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf,
> + size_t len)
> +{
> + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
> +
> + if (iio_evgen->enabled[this_attr->address])
> + handle_nested_irq(iio_evgen->base + this_attr->address);
> +
> + return len;
> +}
> +
> +static IIO_DEVICE_ATTR(poke_ev0, S_IWUSR, NULL, &iio_evgen_poke, 0);
> +static IIO_DEVICE_ATTR(poke_ev1, S_IWUSR, NULL, &iio_evgen_poke, 1);
> +static IIO_DEVICE_ATTR(poke_ev2, S_IWUSR, NULL, &iio_evgen_poke, 2);
> +static IIO_DEVICE_ATTR(poke_ev3, S_IWUSR, NULL, &iio_evgen_poke, 3);
> +static IIO_DEVICE_ATTR(poke_ev4, S_IWUSR, NULL, &iio_evgen_poke, 4);
> +static IIO_DEVICE_ATTR(poke_ev5, S_IWUSR, NULL, &iio_evgen_poke, 5);
> +static IIO_DEVICE_ATTR(poke_ev6, S_IWUSR, NULL, &iio_evgen_poke, 6);
> +static IIO_DEVICE_ATTR(poke_ev7, S_IWUSR, NULL, &iio_evgen_poke, 7);
> +static IIO_DEVICE_ATTR(poke_ev8, S_IWUSR, NULL, &iio_evgen_poke, 8);
> +static IIO_DEVICE_ATTR(poke_ev9, S_IWUSR, NULL, &iio_evgen_poke, 9);
> +
> +static struct attribute *iio_evgen_attrs[] = {
> + &iio_dev_attr_poke_ev0.dev_attr.attr,
> + &iio_dev_attr_poke_ev1.dev_attr.attr,
> + &iio_dev_attr_poke_ev2.dev_attr.attr,
> + &iio_dev_attr_poke_ev3.dev_attr.attr,
> + &iio_dev_attr_poke_ev4.dev_attr.attr,
> + &iio_dev_attr_poke_ev5.dev_attr.attr,
> + &iio_dev_attr_poke_ev6.dev_attr.attr,
> + &iio_dev_attr_poke_ev7.dev_attr.attr,
> + &iio_dev_attr_poke_ev8.dev_attr.attr,
> + &iio_dev_attr_poke_ev9.dev_attr.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group iio_evgen_group = {
> + .attrs = iio_evgen_attrs,
> +};
> +
> +static const struct attribute_group *iio_evgen_groups[] = {
> + &iio_evgen_group,
> + NULL
> +};
> +
> +static struct device iio_evgen_dev = {
> + .bus = &iio_bus_type,
> + .groups = iio_evgen_groups,
> + .release = &iio_evgen_release,
> +};
> +static __init int iio_dummy_evgen_init(void)
> +{
> + int ret = iio_dummy_evgen_create();
> + if (ret < 0)
> + return ret;
> + device_initialize(&iio_evgen_dev);
> + dev_set_name(&iio_evgen_dev, "iio_evgen");
> + return device_add(&iio_evgen_dev);
> +}
> +module_init(iio_dummy_evgen_init);
> +
> +static __exit void iio_dummy_evgen_exit(void)
> +{
> + device_unregister(&iio_evgen_dev);
> +}
> +module_exit(iio_dummy_evgen_exit);
> +
> +MODULE_AUTHOR("Jonathan Cameron <jic23@cam.ac.uk>");
> +MODULE_DESCRIPTION("IIO dummy driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/staging/iio/iio_dummy_evgen.h b/drivers/staging/iio/iio_dummy_evgen.h
> new file mode 100644
> index 0000000..d8845e2
> --- /dev/null
> +++ b/drivers/staging/iio/iio_dummy_evgen.h
> @@ -0,0 +1,2 @@
> +int iio_dummy_evgen_get_irq(void);
> +int iio_dummy_evgen_release_irq(int irq);
> diff --git a/drivers/staging/iio/iio_simple_dummy.c b/drivers/staging/iio/iio_simple_dummy.c
> index 463043e..d16c6a8 100644
> --- a/drivers/staging/iio/iio_simple_dummy.c
> +++ b/drivers/staging/iio/iio_simple_dummy.c
> @@ -20,6 +20,8 @@
> #include <linux/moduleparam.h>
>
> #include "iio.h"
> +#include "sysfs.h"
> +#include "iio_simple_dummy.h"
>
> /*
> * A few elements needed to fake a bus for this driver
> @@ -53,26 +55,6 @@ static const struct iio_dummy_accel_calibscale dummy_scales[] = {
> { 733, 13, 0x9 }, /* 733.00013 */
> };
>
> -/**
> - * struct iio_dummy_state - device instance specific state.
> - * @dac_val: cache for dac value
> - * @single_ended_adc_val: cache for single ended adc value
> - * @differential_adc_val: cache for differential adc value
> - * @accel_val: cache for acceleration value
> - * @accel_calibbias: cache for acceleration calibbias
> - * @accel_calibscale: cache for acceleration calibscale
> - * @lock: lock to ensure state is consistent
> - */
> -struct iio_dummy_state {
> - int dac_val;
> - int single_ended_adc_val;
> - int differential_adc_val[2];
> - int accel_val;
> - int accel_calibbias;
> - const struct iio_dummy_accel_calibscale *accel_calibscale;
> - struct mutex lock;
> -};
> -
> /*
> * iio_dummy_channels - Description of available channels
> *
> @@ -101,6 +83,14 @@ static struct iio_chan_spec iio_dummy_channels[] = {
> */
> (1 << IIO_CHAN_INFO_SCALE_SEPARATE),
>
> +#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
> + /*
> + * simple event - triggered when value rises above
> + * a threshold
> + */
> + .event_mask = IIO_EV_BIT(IIO_EV_TYPE_THRESH,
> + IIO_EV_DIR_RISING),
> +#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */
> },
> /* Differential ADC channel in_voltage1-voltage2_raw etc*/
> {
> @@ -296,6 +286,12 @@ static const struct iio_info iio_dummy_info = {
> .driver_module = THIS_MODULE,
> .read_raw = &iio_dummy_read_raw,
> .write_raw = &iio_dummy_write_raw,
> +#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
> + .read_event_config = &iio_simple_dummy_read_event_config,
> + .write_event_config = &iio_simple_dummy_write_event_config,
> + .read_event_value = &iio_simple_dummy_read_event_value,
> + .write_event_value = &iio_simple_dummy_write_event_value,
> +#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */
> };
>
> /**
> @@ -392,11 +388,16 @@ static int __devinit iio_dummy_probe(int index)
> /* Specify that device provides sysfs type interfaces */
> indio_dev->modes = INDIO_DIRECT_MODE;
>
> - ret = iio_device_register(indio_dev);
> + ret = iio_simple_dummy_events_register(indio_dev);
> if (ret < 0)
> goto error_free_device;
> + ret = iio_device_register(indio_dev);
> + if (ret < 0)
> + goto error_unregister_events;
>
> return 0;
> +error_unregister_events:
> + iio_simple_dummy_events_unregister(indio_dev);
> error_free_device:
> /* Note free device should only be called, before registration
> * has succeeded. */
> @@ -413,6 +414,7 @@ error_ret:
> */
> static int iio_dummy_remove(int index)
> {
> + int ret;
> /*
> * Get a pointer to the device instance iio_dev structure
> * from the bus subsystem. E.g.
> @@ -423,10 +425,14 @@ static int iio_dummy_remove(int index)
>
> /* Device specific code to power down etc */
>
> + ret = iio_simple_dummy_events_unregister(indio_dev);
> + if (ret)
> + goto error_ret;
> /* Unregister the device and free all structures */
> iio_device_unregister(indio_dev);
>
> - return 0;
> +error_ret:
> + return ret;
> }
>
> /**
> diff --git a/drivers/staging/iio/iio_simple_dummy.h b/drivers/staging/iio/iio_simple_dummy.h
> new file mode 100644
> index 0000000..998fd1f
> --- /dev/null
> +++ b/drivers/staging/iio/iio_simple_dummy.h
> @@ -0,0 +1,81 @@
> +/**
> + * Copyright (c) 2011 Jonathan Cameron
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * Join together the various functionality of iio_simple_dummy driver
> + */
> +
> +#include <linux/kernel.h>
> +
> +struct iio_dummy_accel_calibscale;
> +
> +/**
> + * struct iio_dummy_state - device instance specific state.
> + * @dac_val: cache for dac value
> + * @single_ended_adc_val: cache for single ended adc value
> + * @differential_adc_val: cache for differential adc value
> + * @accel_val: cache for acceleration value
> + * @accel_calibbias: cache for acceleration calibbias
> + * @accel_calibscale: cache for acceleration calibscale
> + * @lock: lock to ensure state is consistent
> + * @event_irq: irq number for event line (faked)
> + * @event_val: cache for event theshold value
> + * @event_en: cache of whether event is enabled
> + */
> +struct iio_dummy_state {
> + int dac_val;
> + int single_ended_adc_val;
> + int differential_adc_val[2];
> + int accel_val;
> + int accel_calibbias;
> + const struct iio_dummy_accel_calibscale *accel_calibscale;
> + struct mutex lock;
> +#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
> + int event_irq;
> + int event_val;
> + bool event_en;
> +#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */
> +};
> +
> +#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
> +
> +struct iio_dev;
> +
> +int iio_simple_dummy_read_event_config(struct iio_dev *indio_dev,
> + u64 event_code);
> +
> +int iio_simple_dummy_write_event_config(struct iio_dev *indio_dev,
> + u64 event_code,
> + int state);
> +
> +int iio_simple_dummy_read_event_value(struct iio_dev *indio_dev,
> + u64 event_code,
> + int *val);
> +
> +int iio_simple_dummy_write_event_value(struct iio_dev *indio_dev,
> + u64 event_code,
> + int val);
> +
> +int iio_simple_dummy_events_register(struct iio_dev *indio_dev);
> +int iio_simple_dummy_events_unregister(struct iio_dev *indio_dev);
> +
> +#else /* Stubs for when events are disabled at compile time */
> +
> +static inline int
> +iio_simple_dummy_events_register(struct iio_dev *indio_dev)
> +{
> + return 0;
> +};
> +
> +static inline int
> +iio_simple_dummy_events_unregister(struct iio_dev *indio_dev)
> +{
> + return 0;
> +};
> +
> +#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS*/
> +
> +
> diff --git a/drivers/staging/iio/iio_simple_dummy_events.c b/drivers/staging/iio/iio_simple_dummy_events.c
> new file mode 100644
> index 0000000..9f00cff
> --- /dev/null
> +++ b/drivers/staging/iio/iio_simple_dummy_events.c
> @@ -0,0 +1,190 @@
> +/**
> + * Copyright (c) 2011 Jonathan Cameron
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * Event handling elements of industrial I/O reference driver.
> + */
> +#include <linux/kernel.h>
> +#include <linux/slab.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +
> +#include "iio.h"
> +#include "sysfs.h"
> +#include "iio_simple_dummy.h"
> +
> +/* Evgen 'fakes' interrupt events for this example */
> +#include "iio_dummy_evgen.h"
> +
> +/**
> + * iio_simple_dummy_read_event_config() - is event enabled?
> + * @indio_dev: the device instance data
> + * @event_code: event code of the event being queried
> + *
> + * This function would normally query the relevant registers or a cache to
> + * discover if the event generation is enabled on the device.
> + */
> +int iio_simple_dummy_read_event_config(struct iio_dev *indio_dev,
> + u64 event_code)
> +{
> + struct iio_dummy_state *st = iio_priv(indio_dev);
> +
> + return st->event_en;
> +}
> +
> +/**
> + * iio_simple_dummy_write_event_config() - set whether event is enabled
> + * @indio_dev: the device instance data
> + * @event_code: event code of event being enabled/disabled
> + * @state: whether to enable or disable the device.
> + *
> + * This function would normally set the relevant registers on the devices
> + * so that it generates the specified event. Here it just sets up a cached
> + * value.
> + */
> +int iio_simple_dummy_write_event_config(struct iio_dev *indio_dev,
> + u64 event_code,
> + int state)
> +{
> + struct iio_dummy_state *st = iio_priv(indio_dev);
> +
> + /*
> + * Deliberately over the top code splitting to illustrate
> + * how this is done when multiple events exist.
> + */
> + switch (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code)) {
> + case IIO_VOLTAGE:
> + switch (IIO_EVENT_CODE_EXTRACT_TYPE(event_code)) {
> + case IIO_EV_TYPE_THRESH:
> + if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) ==
> + IIO_EV_DIR_RISING)
> + st->event_en = state;
> + else
> + return -EINVAL;
> + break;
> + default:
> + return -EINVAL;
> + }
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * iio_simple_dummy_read_event_value() - get value associated with event
> + * @indio_dev: device instance specific data
> + * @event_code: event code for the event whose value is being queried
> + * @val: value for the event code.
> + *
> + * Many devices provide a large set of events of which only a subset may
> + * be enabled at a time, with value registers whose meaning changes depending
> + * on the event enabled. This often means that the driver must cache the values
> + * associated with each possible events so that the right value is in place when
> + * the enabled event is changed.
> + */
> +int iio_simple_dummy_read_event_value(struct iio_dev *indio_dev,
> + u64 event_code,
> + int *val)
> +{
> + struct iio_dummy_state *st = iio_priv(indio_dev);
> +
> + *val = st->event_val;
> +
> + return 0;
> +}
> +
> +/**
> + * iio_simple_dummy_write_event_value() - set value associate with event
> + * @indio_dev: device instance specific data
> + * @event_code: event code for the event whose value is being set
> + * @val: the value to be set.
> + */
> +int iio_simple_dummy_write_event_value(struct iio_dev *indio_dev,
> + u64 event_code,
> + int val)
> +{
> + struct iio_dummy_state *st = iio_priv(indio_dev);
> +
> + st->event_val = val;
> +
> + return 0;
> +}
> +
> +/**
> + * iio_simple_dummy_event_handler() - identify and pass on event
> + * @irq: irq of event line
> + * @private: pointer to device instance state.
> + *
> + * This handler is responsible for querying the device to find out what
> + * event occured and for then pushing that event towards userspace.
> + * Here only one event occurs so we push that directly on with locally
> + * grabbed timestamp.
> + */
> +static irqreturn_t iio_simple_dummy_event_handler(int irq, void *private)
> +{
> + struct iio_dev *indio_dev = private;
> + iio_push_event(indio_dev,
> + IIO_EVENT_CODE(IIO_VOLTAGE, 0, 0,
> + IIO_EV_DIR_RISING,
> + IIO_EV_TYPE_THRESH, 0, 0, 0),
> + iio_get_time_ns());
> + return IRQ_HANDLED;
> +}
> +
> +/**
> + * iio_simple_dummy_events_register() - setup interrupt handling for events
> + * @indio_dev: device instance data
> + *
> + * This function requests the threaded interrupt to handle the events.
> + * Normally the irq is a hardware interrupt and the number comes
> + * from board configuration files. Here we get it from a companion
> + * module that fakes the interrupt for us. Note that module in
> + * no way forms part of this example. Just assume that events magically
> + * appear via the provided interrupt.
> + */
> +int iio_simple_dummy_events_register(struct iio_dev *indio_dev)
> +{
> + struct iio_dummy_state *st = iio_priv(indio_dev);
> + int ret;
> +
> + /* Fire up event source - normally not present */
> + st->event_irq = iio_dummy_evgen_get_irq();
> + if (st->event_irq < 0) {
> + ret = st->event_irq;
> + goto error_ret;
> + }
> + ret = request_threaded_irq(st->event_irq,
> + NULL,
> + &iio_simple_dummy_event_handler,
> + IRQF_ONESHOT,
> + "iio_simple_event",
> + indio_dev);
> + if (ret < 0)
> + goto error_free_evgen;
> + return 0;
> +
> +error_free_evgen:
> + iio_dummy_evgen_release_irq(st->event_irq);
> +error_ret:
> + return ret;
> +}
> +
> +/**
> + * iio_simple_dummy_events_unregister() - tidy up interrupt handling on remove
> + * @indio_dev: device instance data
> + */
> +int iio_simple_dummy_events_unregister(struct iio_dev *indio_dev)
> +{
> + struct iio_dummy_state *st = iio_priv(indio_dev);
> +
> + free_irq(st->event_irq, indio_dev);
> + /* Not part of normal driver */
> + iio_dummy_evgen_release_irq(st->event_irq);
> +
> + return 0;
> +}
next prev parent reply other threads:[~2011-09-21 9:59 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-20 15:58 [PATCH 0/3 V2] staging:iio:Documentation via dummy driver Jonathan Cameron
2011-09-20 15:58 ` [PATCH 1/3] staging:iio:Documentation Simple dummy driver to explain the basics Jonathan Cameron
2011-09-20 15:58 ` [PATCH 2/3] staging:iio:dummy Add event support + fake event generator Jonathan Cameron
2011-09-21 9:59 ` Jonathan Cameron [this message]
2011-09-20 15:58 ` [PATCH 3/3] staging:iio:dummy Add buffered reading support Jonathan Cameron
2011-09-27 10:54 ` [PATCH 0/3 V2] staging:iio:Documentation via dummy driver Jonathan Cameron
2011-09-30 9:54 ` Jonathan Cameron
-- strict thread matches above, loose matches on Subject: below --
2011-10-14 15:34 [PATCH 0/3] staging:iio:dummy (example) driver Jonathan Cameron
2011-10-14 15:34 ` [PATCH 2/3] staging:iio:dummy Add event support + fake event generator Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E79B587.70107@cam.ac.uk \
--to=jic23@cam.ac.uk \
--cc=jonathan.kunkee@gmail.com \
--cc=linux-iio@vger.kernel.org \
--cc=manuel.stahl@iis.fraunhofer.de \
--cc=michael.hennerich@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).