From: Jonathan Cameron <jic23@kernel.org>
To: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: linux-iio@vger.kernel.org,
Patrice Vilchez <patrice.vilchez@atmel.com>,
Nicolas Ferre <nicolas.ferre@atmel.com>,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Subject: Re: [PATCH 5/6] AT91: IIO: cosmetic fixes, better error messages
Date: Sat, 10 Dec 2011 14:44:10 +0000 [thread overview]
Message-ID: <4EE3703A.1060703@kernel.org> (raw)
In-Reply-To: <1323282340-24475-6-git-send-email-maxime.ripard@free-electrons.com>
All sensible but given I haven't merged anything (as being slow with
both trees just now), I'd rather see these pushed down into the
various places they were first created...
Jonathan
On 12/07/2011 06:25 PM, Maxime Ripard wrote:
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
>
> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> ---
> drivers/staging/iio/adc/at91_adc.c | 34 +++++++++++++++++++---------------
> 1 files changed, 19 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/staging/iio/adc/at91_adc.c b/drivers/staging/iio/adc/at91_adc.c
> index 4a0421e..9d6e351 100644
> --- a/drivers/staging/iio/adc/at91_adc.c
> +++ b/drivers/staging/iio/adc/at91_adc.c
> @@ -42,16 +42,16 @@ struct at91_adc_desc {
> };
>
> struct at91_adc_state {
> - struct clk *clk;
> - bool done;
> - struct mutex lock;
> - int irq;
> - wait_queue_head_t wq_data_avail;
> - u16 last_value;
> - void __iomem *reg_base;
> - unsigned int vref_mv;
> - unsigned long channels_mask;
> - struct at91_adc_desc *desc;
> + u32 channels_mask;
> + struct clk *clk;
> + bool done;
> + struct at91_adc_desc *desc;
> + int irq;
> + u16 last_value;
> + struct mutex lock;
> + void __iomem *reg_base;
> + u32 vref_mv;
> + wait_queue_head_t wq_data_avail;
> };
>
> static struct at91_adc_desc at91_adc_desc_sam9g20 = {
> @@ -103,7 +103,7 @@ static irqreturn_t at91_adc_eoc_trigger(int irq, void *private)
> }
>
> static int at91_adc_channel_init(struct iio_dev *idev,
> - struct at91_adc_data *pdata)
> + struct at91_adc_data *pdata)
> {
> struct at91_adc_state *st = iio_priv(idev);
> struct iio_chan_spec *chan_array;
> @@ -139,8 +139,8 @@ static void at91_adc_channel_remove(struct iio_dev *idev)
> }
>
> static int at91_adc_read_raw(struct iio_dev *idev,
> - struct iio_chan_spec const *chan,
> - int *val, int *val2, long mask)
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long mask)
> {
> struct at91_adc_state *st = iio_priv(idev);
> int ret;
> @@ -310,8 +310,10 @@ static int __devinit at91_adc_probe(struct platform_device *pdev)
>
> /* Setup the ADC channels available on the board */
> ret = at91_adc_channel_init(idev, pdata);
> - if (ret < 0)
> + if (ret < 0) {
> + dev_err(&pdev->dev, "Couldn't initialize the channels.\n");
> goto error_free_clk;
> + }
>
> init_waitqueue_head(&st->wq_data_avail);
> mutex_init(&st->lock);
> @@ -320,8 +322,10 @@ static int __devinit at91_adc_probe(struct platform_device *pdev)
> st->channels_mask = pdata->channels_used;
>
> ret = iio_device_register(idev);
> - if (ret < 0)
> + if (ret < 0) {
> + dev_err(&pdev->dev, "Couldn't register the device.\n");
> goto error_free_channels;
> + }
>
> return 0;
>
next prev parent reply other threads:[~2011-12-10 14:44 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-07 18:25 [RFC v2] IIO: Add hardware triggers support to the AT91 ADC driver Maxime Ripard
2011-12-07 18:25 ` [PATCH 1/6] ARM: AT91: Add platform data for the ADCs Maxime Ripard
2011-12-07 18:25 ` [PATCH 2/6] ARM: AT91: IIO: Add AT91 ADC driver Maxime Ripard
2011-12-07 18:25 ` [PATCH 3/6] ARM: AT91: Add the ADC to the sam9g20ek board Maxime Ripard
2011-12-07 18:25 ` [PATCH 4/6] AT91: IIO: Move the SoC specific informations to the ADC driver Maxime Ripard
2011-12-07 18:25 ` [PATCH 5/6] AT91: IIO: cosmetic fixes, better error messages Maxime Ripard
2011-12-10 14:44 ` Jonathan Cameron [this message]
2011-12-12 11:09 ` Maxime Ripard
2011-12-12 21:30 ` Jonathan Cameron
2011-12-07 18:25 ` [PATCH 6/6] AT91: IIO: Add support for hardware triggers for the ADC Maxime Ripard
2011-12-10 15:24 ` Jonathan Cameron
2011-12-12 13:55 ` Maxime Ripard
2011-12-12 21:29 ` Jonathan Cameron
2011-12-13 13:33 ` Maxime Ripard
2011-12-07 18:28 ` [RFC v2] IIO: Add hardware triggers support to the AT91 ADC driver Maxime Ripard
2011-12-12 15:09 ` Maxime Ripard
2011-12-12 21:14 ` Jonathan Cameron
2011-12-16 17:49 ` Maxime Ripard
2011-12-19 8:41 ` archive
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EE3703A.1060703@kernel.org \
--to=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=maxime.ripard@free-electrons.com \
--cc=nicolas.ferre@atmel.com \
--cc=patrice.vilchez@atmel.com \
--cc=thomas.petazzoni@free-electrons.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).