linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: linux-iio@vger.kernel.org,
	Patrice Vilchez <patrice.vilchez@atmel.com>,
	Nicolas Ferre <nicolas.ferre@atmel.com>,
	Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Subject: Re: [PATCH 5/6] AT91: IIO: cosmetic fixes, better error messages
Date: Mon, 12 Dec 2011 21:30:14 +0000	[thread overview]
Message-ID: <4EE67266.1050508@kernel.org> (raw)
In-Reply-To: <4EE5E104.3070206@free-electrons.com>

On 12/12/2011 11:09 AM, Maxime Ripard wrote:
> Hi Jonathan,
> 
> Ok, I will merge this patch with the other patchset and resend a version
> of the other patchset.
> 
> I suppose you also want the fourth patch merged ?
If they aren't how you would have written it from scratch, then yes
please (the answer that saves me reading that patch - daughter doing 30
second count down for a story ;)
> 
> Maxime
> 
> On 10/12/2011 15:44, Jonathan Cameron wrote:
>> All sensible but given I haven't merged anything (as being slow with
>> both trees just now), I'd rather see these pushed down into the
>> various places they were first created...
>>
>> Jonathan
>>
>> On 12/07/2011 06:25 PM, Maxime Ripard wrote:
>>> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
>>>
>>> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
>>> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
>>> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>>> ---
>>>  drivers/staging/iio/adc/at91_adc.c |   34 +++++++++++++++++++---------------
>>>  1 files changed, 19 insertions(+), 15 deletions(-)
>>>
>>> diff --git a/drivers/staging/iio/adc/at91_adc.c b/drivers/staging/iio/adc/at91_adc.c
>>> index 4a0421e..9d6e351 100644
>>> --- a/drivers/staging/iio/adc/at91_adc.c
>>> +++ b/drivers/staging/iio/adc/at91_adc.c
>>> @@ -42,16 +42,16 @@ struct at91_adc_desc {
>>>  };
>>>  
>>>  struct at91_adc_state {
>>> -	struct clk *clk;
>>> -	bool done;
>>> -	struct mutex lock;
>>> -	int irq;
>>> -	wait_queue_head_t wq_data_avail;
>>> -	u16 last_value;
>>> -	void __iomem *reg_base;
>>> -	unsigned int vref_mv;
>>> -	unsigned long channels_mask;
>>> -	struct at91_adc_desc *desc;
>>> +	u32			channels_mask;
>>> +	struct clk		*clk;
>>> +	bool			done;
>>> +	struct at91_adc_desc	*desc;
>>> +	int			irq;
>>> +	u16			last_value;
>>> +	struct mutex		lock;
>>> +	void __iomem		*reg_base;
>>> +	u32			vref_mv;
>>> +	wait_queue_head_t	wq_data_avail;
>>>  };
>>>  
>>>  static struct at91_adc_desc at91_adc_desc_sam9g20 = {
>>> @@ -103,7 +103,7 @@ static irqreturn_t at91_adc_eoc_trigger(int irq, void *private)
>>>  }
>>>  
>>>  static int at91_adc_channel_init(struct iio_dev *idev,
>>> -				struct at91_adc_data *pdata)
>>> +				 struct at91_adc_data *pdata)
>>>  {
>>>  	struct at91_adc_state *st = iio_priv(idev);
>>>  	struct iio_chan_spec *chan_array;
>>> @@ -139,8 +139,8 @@ static void at91_adc_channel_remove(struct iio_dev *idev)
>>>  }
>>>  
>>>  static int at91_adc_read_raw(struct iio_dev *idev,
>>> -			    struct iio_chan_spec const *chan,
>>> -			    int *val, int *val2, long mask)
>>> +			     struct iio_chan_spec const *chan,
>>> +			     int *val, int *val2, long mask)
>>>  {
>>>  	struct at91_adc_state *st = iio_priv(idev);
>>>  	int ret;
>>> @@ -310,8 +310,10 @@ static int __devinit at91_adc_probe(struct platform_device *pdev)
>>>  
>>>  	/* Setup the ADC channels available on the board */
>>>  	ret = at91_adc_channel_init(idev, pdata);
>>> -	if (ret < 0)
>>> +	if (ret < 0) {
>>> +		dev_err(&pdev->dev, "Couldn't initialize the channels.\n");
>>>  		goto error_free_clk;
>>> +	}
>>>  
>>>  	init_waitqueue_head(&st->wq_data_avail);
>>>  	mutex_init(&st->lock);
>>> @@ -320,8 +322,10 @@ static int __devinit at91_adc_probe(struct platform_device *pdev)
>>>  	st->channels_mask = pdata->channels_used;
>>>  
>>>  	ret = iio_device_register(idev);
>>> -	if (ret < 0)
>>> +	if (ret < 0) {
>>> +		dev_err(&pdev->dev, "Couldn't register the device.\n");
>>>  		goto error_free_channels;
>>> +	}
>>>  
>>>  	return 0;
>>>  
>>
> 
> 


  reply	other threads:[~2011-12-12 21:30 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-12-07 18:25 [RFC v2] IIO: Add hardware triggers support to the AT91 ADC driver Maxime Ripard
2011-12-07 18:25 ` [PATCH 1/6] ARM: AT91: Add platform data for the ADCs Maxime Ripard
2011-12-07 18:25 ` [PATCH 2/6] ARM: AT91: IIO: Add AT91 ADC driver Maxime Ripard
2011-12-07 18:25 ` [PATCH 3/6] ARM: AT91: Add the ADC to the sam9g20ek board Maxime Ripard
2011-12-07 18:25 ` [PATCH 4/6] AT91: IIO: Move the SoC specific informations to the ADC driver Maxime Ripard
2011-12-07 18:25 ` [PATCH 5/6] AT91: IIO: cosmetic fixes, better error messages Maxime Ripard
2011-12-10 14:44   ` Jonathan Cameron
2011-12-12 11:09     ` Maxime Ripard
2011-12-12 21:30       ` Jonathan Cameron [this message]
2011-12-07 18:25 ` [PATCH 6/6] AT91: IIO: Add support for hardware triggers for the ADC Maxime Ripard
2011-12-10 15:24   ` Jonathan Cameron
2011-12-12 13:55     ` Maxime Ripard
2011-12-12 21:29       ` Jonathan Cameron
2011-12-13 13:33         ` Maxime Ripard
2011-12-07 18:28 ` [RFC v2] IIO: Add hardware triggers support to the AT91 ADC driver Maxime Ripard
2011-12-12 15:09   ` Maxime Ripard
2011-12-12 21:14     ` Jonathan Cameron
2011-12-16 17:49       ` Maxime Ripard
2011-12-19  8:41         ` archive

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4EE67266.1050508@kernel.org \
    --to=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=maxime.ripard@free-electrons.com \
    --cc=nicolas.ferre@atmel.com \
    --cc=patrice.vilchez@atmel.com \
    --cc=thomas.petazzoni@free-electrons.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).