From: Jonathan Cameron <jic23@kernel.org>
To: Lars-Peter Clausen <lars@metafoo.de>
Cc: Jonathan Cameron <jic23@cam.ac.uk>, linux-iio@vger.kernel.org
Subject: Re: [RFC 8/8] staging:iio:dac:ad5791: Convert to extended channel attributes
Date: Mon, 14 May 2012 19:21:26 +0100 [thread overview]
Message-ID: <4FB14D26.9000101@kernel.org> (raw)
In-Reply-To: <1336751635-7934-8-git-send-email-lars@metafoo.de>
On 05/11/2012 04:53 PM, Lars-Peter Clausen wrote:
> Use extended channel attributes instead of raw sysfs files for the additional
> channel attributes. This allows us to remove some boilerplate code.
A nice patch set. I do wonder if we ultimately need to find common
ground for these power down commands with other subsystems. I have a
vague feeling that the pinmux stuff will overlap with this at somepoint.
Afterall it's not uncommon to have these sorts of controls on gpio's
or other pins on a SoC. Probably just a question of keeping an eye
on progress elsewhere for now...
>
> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
> ---
> drivers/staging/iio/dac/ad5791.c | 122 +++++++++++++++++---------------------
> 1 file changed, 53 insertions(+), 69 deletions(-)
>
> diff --git a/drivers/staging/iio/dac/ad5791.c b/drivers/staging/iio/dac/ad5791.c
> index 8628964..4e955ed 100644
> --- a/drivers/staging/iio/dac/ad5791.c
> +++ b/drivers/staging/iio/dac/ad5791.c
> @@ -72,71 +72,50 @@ static int ad5791_spi_read(struct spi_device *spi, u8 addr, u32 *val)
> return ret;
> }
>
> -#define AD5791_CHAN(bits, shift) { \
> - .type = IIO_VOLTAGE, \
> - .output = 1, \
> - .indexed = 1, \
> - .address = AD5791_ADDR_DAC0, \
> - .channel = 0, \
> - .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
> - IIO_CHAN_INFO_SCALE_SHARED_BIT | \
> - IIO_CHAN_INFO_OFFSET_SHARED_BIT, \
> - .scan_type = IIO_ST('u', bits, 24, shift) \
> -}
> -
> -static const struct iio_chan_spec ad5791_channels[] = {
> - [ID_AD5760] = AD5791_CHAN(16, 4),
> - [ID_AD5780] = AD5791_CHAN(18, 2),
> - [ID_AD5781] = AD5791_CHAN(18, 2),
> - [ID_AD5791] = AD5791_CHAN(20, 0)
> +static const char * const ad5791_powerdown_modes[] = {
> + "6kohm_to_gnd",
> + "three_state",
> };
>
> -static ssize_t ad5791_read_powerdown_mode(struct device *dev,
> - struct device_attribute *attr, char *buf)
> +static int ad5791_get_powerdown_mode(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan)
> {
> - struct iio_dev *indio_dev = dev_get_drvdata(dev);
> struct ad5791_state *st = iio_priv(indio_dev);
>
> - const char mode[][14] = {"6kohm_to_gnd", "three_state"};
> -
> - return sprintf(buf, "%s\n", mode[st->pwr_down_mode]);
> + return st->pwr_down_mode;
> }
>
> -static ssize_t ad5791_write_powerdown_mode(struct device *dev,
> - struct device_attribute *attr,
> - const char *buf, size_t len)
> +static int ad5791_set_powerdown_mode(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan, unsigned int mode)
> {
> - struct iio_dev *indio_dev = dev_get_drvdata(dev);
> struct ad5791_state *st = iio_priv(indio_dev);
> - int ret;
>
> - if (sysfs_streq(buf, "6kohm_to_gnd"))
> - st->pwr_down_mode = AD5791_DAC_PWRDN_6K;
> - else if (sysfs_streq(buf, "three_state"))
> - st->pwr_down_mode = AD5791_DAC_PWRDN_3STATE;
> - else
> - ret = -EINVAL;
> + st->pwr_down_mode = mode;
>
> - return ret ? ret : len;
> + return 0;
> }
>
> -static ssize_t ad5791_read_dac_powerdown(struct device *dev,
> - struct device_attribute *attr,
> - char *buf)
> +static const struct iio_enum ad5791_powerdown_mode_enum = {
> + .items = ad5791_powerdown_modes,
> + .num_items = ARRAY_SIZE(ad5791_powerdown_modes),
> + .get = ad5791_get_powerdown_mode,
> + .set = ad5791_set_powerdown_mode,
> +};
> +
> +static ssize_t ad5791_read_dac_powerdown(struct iio_dev *indio_dev,
> + uintptr_t private, const struct iio_chan_spec *chan, char *buf)
> {
> - struct iio_dev *indio_dev = dev_get_drvdata(dev);
> struct ad5791_state *st = iio_priv(indio_dev);
>
> return sprintf(buf, "%d\n", st->pwr_down);
> }
>
> -static ssize_t ad5791_write_dac_powerdown(struct device *dev,
> - struct device_attribute *attr,
> - const char *buf, size_t len)
> +static ssize_t ad5791_write_dac_powerdown(struct iio_dev *indio_dev,
> + uintptr_t private, const struct iio_chan_spec *chan, const char *buf,
> + size_t len)
> {
> long readin;
> int ret;
> - struct iio_dev *indio_dev = dev_get_drvdata(dev);
> struct ad5791_state *st = iio_priv(indio_dev);
>
> ret = strict_strtol(buf, 10, &readin);
> @@ -160,31 +139,6 @@ static ssize_t ad5791_write_dac_powerdown(struct device *dev,
> return ret ? ret : len;
> }
>
> -static IIO_DEVICE_ATTR(out_voltage_powerdown_mode, S_IRUGO |
> - S_IWUSR, ad5791_read_powerdown_mode,
> - ad5791_write_powerdown_mode, 0);
> -
> -static IIO_CONST_ATTR(out_voltage_powerdown_mode_available,
> - "6kohm_to_gnd three_state");
> -
> -#define IIO_DEV_ATTR_DAC_POWERDOWN(_num, _show, _store, _addr) \
> - IIO_DEVICE_ATTR(out_voltage##_num##_powerdown, \
> - S_IRUGO | S_IWUSR, _show, _store, _addr)
> -
> -static IIO_DEV_ATTR_DAC_POWERDOWN(0, ad5791_read_dac_powerdown,
> - ad5791_write_dac_powerdown, 0);
> -
> -static struct attribute *ad5791_attributes[] = {
> - &iio_dev_attr_out_voltage0_powerdown.dev_attr.attr,
> - &iio_dev_attr_out_voltage_powerdown_mode.dev_attr.attr,
> - &iio_const_attr_out_voltage_powerdown_mode_available.dev_attr.attr,
> - NULL,
> -};
> -
> -static const struct attribute_group ad5791_attribute_group = {
> - .attrs = ad5791_attributes,
> -};
> -
> static int ad5791_get_lin_comp(unsigned int span)
> {
> if (span <= 10000)
> @@ -254,6 +208,37 @@ static int ad5791_read_raw(struct iio_dev *indio_dev,
>
> };
>
> +static const struct iio_chan_spec_ext_info ad5791_ext_info[] = {
> + {
> + .name = "powerdown",
> + .shared = true,
> + .read = ad5791_read_dac_powerdown,
> + .write = ad5791_write_dac_powerdown,
> + },
> + IIO_ENUM("powerdown_mode", true, &ad5791_powerdown_mode_enum),
> + IIO_ENUM_AVAILABLE("powerdown_mode", &ad5791_powerdown_mode_enum),
> + { },
> +};
> +
> +#define AD5791_CHAN(bits, shift) { \
> + .type = IIO_VOLTAGE, \
> + .output = 1, \
> + .indexed = 1, \
> + .address = AD5791_ADDR_DAC0, \
> + .channel = 0, \
> + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
> + IIO_CHAN_INFO_SCALE_SHARED_BIT | \
> + IIO_CHAN_INFO_OFFSET_SHARED_BIT, \
> + .scan_type = IIO_ST('u', bits, 24, shift), \
> + .ext_info = ad5791_ext_info, \
> +}
> +
> +static const struct iio_chan_spec ad5791_channels[] = {
> + [ID_AD5760] = AD5791_CHAN(16, 4),
> + [ID_AD5780] = AD5791_CHAN(18, 2),
> + [ID_AD5781] = AD5791_CHAN(18, 2),
> + [ID_AD5791] = AD5791_CHAN(20, 0)
> +};
>
> static int ad5791_write_raw(struct iio_dev *indio_dev,
> struct iio_chan_spec const *chan,
> @@ -278,7 +263,6 @@ static int ad5791_write_raw(struct iio_dev *indio_dev,
> static const struct iio_info ad5791_info = {
> .read_raw = &ad5791_read_raw,
> .write_raw = &ad5791_write_raw,
> - .attrs = &ad5791_attribute_group,
> .driver_module = THIS_MODULE,
> };
>
next prev parent reply other threads:[~2012-05-14 18:21 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-11 15:53 [RFC 1/8] iio: Add helper functions for enum style channel attributes Lars-Peter Clausen
2012-05-11 15:53 ` [RFC 2/8] staging:iio:dac:ad5064: Use iio_enum for powerdown modes Lars-Peter Clausen
2012-05-14 17:48 ` Jonathan Cameron
2012-05-11 15:53 ` [RFC 3/8] staging:iio:dac:ad5446: " Lars-Peter Clausen
2012-05-14 17:55 ` Jonathan Cameron
2012-05-11 15:53 ` [RFC 4/8] staging:iio:dac:ad5380: Convert to extended channel attributes Lars-Peter Clausen
2012-05-14 18:11 ` Jonathan Cameron
2012-05-11 15:53 ` [RFC 5/8] staging:iio:dac:ad5504: " Lars-Peter Clausen
2012-05-14 18:14 ` Jonathan Cameron
2012-05-11 15:53 ` [RFC 6/8] staging:iio:dac:ad5624r: " Lars-Peter Clausen
2012-05-14 18:16 ` Jonathan Cameron
2012-05-11 15:53 ` [RFC 7/8] staging:iio:dac:ad5686: " Lars-Peter Clausen
2012-05-14 18:18 ` Jonathan Cameron
2012-05-11 15:53 ` [RFC 8/8] staging:iio:dac:ad5791: " Lars-Peter Clausen
2012-05-14 18:21 ` Jonathan Cameron [this message]
2012-05-14 17:42 ` [RFC 1/8] iio: Add helper functions for enum style " Jonathan Cameron
2012-05-14 18:15 ` Lars-Peter Clausen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FB14D26.9000101@kernel.org \
--to=jic23@kernel.org \
--cc=jic23@cam.ac.uk \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).