From: Jonathan Cameron <jic23@kernel.org>
To: Lars-Peter Clausen <lars@metafoo.de>
Cc: Jonathan Cameron <jic23@cam.ac.uk>, linux-iio@vger.kernel.org
Subject: Re: [PATCH 17/18] staging:iio:dac:ad5791: Move private structs and defines from header to C file
Date: Mon, 21 May 2012 17:43:34 +0100 [thread overview]
Message-ID: <4FBA70B6.2080604@kernel.org> (raw)
In-Reply-To: <1337600587-19848-17-git-send-email-lars@metafoo.de>
On 05/21/2012 12:43 PM, Lars-Peter Clausen wrote:
> The header for this driver contains some private structs and defines, which do
> not have to be shared between multiple source files, as well as the platform
> data struct for this driver, which has to be shared with other source files.
> Since there is no need to expose those private structs and defines move them to
> the source file.
Another sensible move. Same comment applies as previous. Feel free to
ignore as then you have a straight move of lines which may be clearer.
>
> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
> ---
> drivers/staging/iio/dac/ad5791.c | 83 ++++++++++++++++++++++++++++++++++++++
> drivers/staging/iio/dac/ad5791.h | 83 --------------------------------------
> 2 files changed, 83 insertions(+), 83 deletions(-)
>
> diff --git a/drivers/staging/iio/dac/ad5791.c b/drivers/staging/iio/dac/ad5791.c
> index 82b51a7..5de28c2 100644
> --- a/drivers/staging/iio/dac/ad5791.c
> +++ b/drivers/staging/iio/dac/ad5791.c
> @@ -22,6 +22,89 @@
>
> #include "ad5791.h"
>
> +#define AD5791_RES_MASK(x) ((1 << (x)) - 1)
> +#define AD5791_DAC_MASK AD5791_RES_MASK(20)
> +#define AD5791_DAC_MSB (1 << 19)
> +
> +#define AD5791_CMD_READ (1 << 23)
> +#define AD5791_CMD_WRITE (0 << 23)
> +#define AD5791_ADDR(addr) ((addr) << 20)
> +
> +/* Registers */
> +#define AD5791_ADDR_NOOP 0
> +#define AD5791_ADDR_DAC0 1
> +#define AD5791_ADDR_CTRL 2
> +#define AD5791_ADDR_CLRCODE 3
> +#define AD5791_ADDR_SW_CTRL 4
> +
> +/* Control Register */
> +#define AD5791_CTRL_RBUF (1 << 1)
> +#define AD5791_CTRL_OPGND (1 << 2)
> +#define AD5791_CTRL_DACTRI (1 << 3)
> +#define AD5791_CTRL_BIN2SC (1 << 4)
> +#define AD5791_CTRL_SDODIS (1 << 5)
> +#define AD5761_CTRL_LINCOMP(x) ((x) << 6)
> +
> +#define AD5791_LINCOMP_0_10 0
> +#define AD5791_LINCOMP_10_12 1
> +#define AD5791_LINCOMP_12_16 2
> +#define AD5791_LINCOMP_16_19 3
> +#define AD5791_LINCOMP_19_20 12
> +
> +#define AD5780_LINCOMP_0_10 0
> +#define AD5780_LINCOMP_10_20 12
> +
> +/* Software Control Register */
> +#define AD5791_SWCTRL_LDAC (1 << 0)
> +#define AD5791_SWCTRL_CLR (1 << 1)
> +#define AD5791_SWCTRL_RESET (1 << 2)
> +
> +#define AD5791_DAC_PWRDN_6K 0
> +#define AD5791_DAC_PWRDN_3STATE 1
> +
> +/**
> + * struct ad5791_chip_info - chip specific information
> + * @get_lin_comp: function pointer to the device specific function
> + */
> +
> +struct ad5791_chip_info {
> + int (*get_lin_comp) (unsigned int span);
> +};
> +
> +/**
> + * struct ad5791_state - driver instance specific data
> + * @us: spi_device
> + * @reg_vdd: positive supply regulator
> + * @reg_vss: negative supply regulator
> + * @chip_info: chip model specific constants
> + * @vref_mv: actual reference voltage used
> + * @vref_neg_mv: voltage of the negative supply
> + * @pwr_down_mode current power down mode
> + */
> +
> +struct ad5791_state {
> + struct spi_device *spi;
> + struct regulator *reg_vdd;
> + struct regulator *reg_vss;
> + const struct ad5791_chip_info *chip_info;
> + unsigned short vref_mv;
> + unsigned int vref_neg_mv;
> + unsigned ctrl;
> + unsigned pwr_down_mode;
> + bool pwr_down;
> +};
> +
> +/**
> + * ad5791_supported_device_ids:
> + */
> +
> +enum ad5791_supported_device_ids {
> + ID_AD5760,
> + ID_AD5780,
> + ID_AD5781,
> + ID_AD5791,
> +};
> +
> static int ad5791_spi_write(struct spi_device *spi, u8 addr, u32 val)
> {
> union {
> diff --git a/drivers/staging/iio/dac/ad5791.h b/drivers/staging/iio/dac/ad5791.h
> index fd7edbd..87a6c92 100644
> --- a/drivers/staging/iio/dac/ad5791.h
> +++ b/drivers/staging/iio/dac/ad5791.h
> @@ -9,46 +9,6 @@
> #ifndef SPI_AD5791_H_
> #define SPI_AD5791_H_
>
> -#define AD5791_RES_MASK(x) ((1 << (x)) - 1)
> -#define AD5791_DAC_MASK AD5791_RES_MASK(20)
> -#define AD5791_DAC_MSB (1 << 19)
> -
> -#define AD5791_CMD_READ (1 << 23)
> -#define AD5791_CMD_WRITE (0 << 23)
> -#define AD5791_ADDR(addr) ((addr) << 20)
> -
> -/* Registers */
> -#define AD5791_ADDR_NOOP 0
> -#define AD5791_ADDR_DAC0 1
> -#define AD5791_ADDR_CTRL 2
> -#define AD5791_ADDR_CLRCODE 3
> -#define AD5791_ADDR_SW_CTRL 4
> -
> -/* Control Register */
> -#define AD5791_CTRL_RBUF (1 << 1)
> -#define AD5791_CTRL_OPGND (1 << 2)
> -#define AD5791_CTRL_DACTRI (1 << 3)
> -#define AD5791_CTRL_BIN2SC (1 << 4)
> -#define AD5791_CTRL_SDODIS (1 << 5)
> -#define AD5761_CTRL_LINCOMP(x) ((x) << 6)
> -
> -#define AD5791_LINCOMP_0_10 0
> -#define AD5791_LINCOMP_10_12 1
> -#define AD5791_LINCOMP_12_16 2
> -#define AD5791_LINCOMP_16_19 3
> -#define AD5791_LINCOMP_19_20 12
> -
> -#define AD5780_LINCOMP_0_10 0
> -#define AD5780_LINCOMP_10_20 12
> -
> -/* Software Control Register */
> -#define AD5791_SWCTRL_LDAC (1 << 0)
> -#define AD5791_SWCTRL_CLR (1 << 1)
> -#define AD5791_SWCTRL_RESET (1 << 2)
> -
> -#define AD5791_DAC_PWRDN_6K 0
> -#define AD5791_DAC_PWRDN_3STATE 1
> -
> /*
> * TODO: struct ad5791_platform_data needs to go into include/linux/iio
> */
> @@ -66,47 +26,4 @@ struct ad5791_platform_data {
> bool use_rbuf_gain2;
> };
>
> -/**
> - * struct ad5791_chip_info - chip specific information
> - * @get_lin_comp: function pointer to the device specific function
> - */
> -
> -struct ad5791_chip_info {
> - int (*get_lin_comp) (unsigned int span);
> -};
> -
> -/**
> - * struct ad5791_state - driver instance specific data
> - * @us: spi_device
> - * @reg_vdd: positive supply regulator
> - * @reg_vss: negative supply regulator
> - * @chip_info: chip model specific constants
> - * @vref_mv: actual reference voltage used
> - * @vref_neg_mv: voltage of the negative supply
> - * @pwr_down_mode current power down mode
> - */
> -
> -struct ad5791_state {
> - struct spi_device *spi;
> - struct regulator *reg_vdd;
> - struct regulator *reg_vss;
> - const struct ad5791_chip_info *chip_info;
> - unsigned short vref_mv;
> - unsigned int vref_neg_mv;
> - unsigned ctrl;
> - unsigned pwr_down_mode;
> - bool pwr_down;
> -};
> -
> -/**
> - * ad5791_supported_device_ids:
> - */
> -
> -enum ad5791_supported_device_ids {
> - ID_AD5760,
> - ID_AD5780,
> - ID_AD5781,
> - ID_AD5791,
> -};
> -
> #endif /* SPI_AD5791_H_ */
next prev parent reply other threads:[~2012-05-21 16:43 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-21 11:42 [PATCH 01/18] iio: Add helper functions for enum style channel attributes Lars-Peter Clausen
2012-05-21 11:42 ` [PATCH 02/18] staging:iio:dac:ad5064: Use iio_enum for powerdown modes Lars-Peter Clausen
2012-05-21 11:42 ` [PATCH 03/18] staging:iio:dac:ad5446: " Lars-Peter Clausen
2012-05-21 11:42 ` [PATCH 04/18] staging:iio:dac:ad5380: Convert to extended channel attributes Lars-Peter Clausen
2012-05-21 11:42 ` [PATCH 05/18] staging:iio:dac:ad5504: " Lars-Peter Clausen
2012-05-21 11:42 ` [PATCH 06/18] staging:iio:dac:ad5624r: " Lars-Peter Clausen
2012-05-21 11:42 ` [PATCH 07/18] staging:iio:dac:ad5686: " Lars-Peter Clausen
2012-05-21 11:42 ` [PATCH 08/18] staging:iio:dac:ad5791: " Lars-Peter Clausen
2012-05-21 11:42 ` [PATCH 09/18] staging:iio:dac: Remove unused dac.h includes Lars-Peter Clausen
2012-05-21 11:42 ` [PATCH 10/18] staging:iio:dac:max517: Convert to channel spec Lars-Peter Clausen
2012-05-25 16:27 ` Lars-Peter Clausen
2012-05-25 19:51 ` Roland Stigge
2012-05-21 11:43 ` [PATCH 11/18] staging:iio:dac: Remove dac.h Lars-Peter Clausen
2012-05-21 11:43 ` [PATCH 12/18] staging:iio:dac:ad5504: Use strtobool for boolean values Lars-Peter Clausen
2012-05-21 11:43 ` [PATCH 13/18] staging:iio:dac:ad5624r: " Lars-Peter Clausen
2012-05-21 11:43 ` [PATCH 14/18] staging:iio:dac:ad5791: " Lars-Peter Clausen
2012-05-21 11:43 ` [PATCH 15/18] staging:iio:dac:ad5504: Check if IRQ was requested before freeing it Lars-Peter Clausen
2012-05-21 11:43 ` [PATCH 16/18] staging:iio:dac:ad5504: Move private structs and defines from header to C file Lars-Peter Clausen
2012-05-21 16:42 ` Jonathan Cameron
2012-05-21 11:43 ` [PATCH 17/18] staging:iio:dac:ad5791: " Lars-Peter Clausen
2012-05-21 16:43 ` Jonathan Cameron [this message]
2012-05-21 11:43 ` [PATCH 18/18] staging:iio: Move DAC drivers out of staging Lars-Peter Clausen
2012-05-21 16:51 ` Jonathan Cameron
2012-05-21 16:40 ` [PATCH 01/18] iio: Add helper functions for enum style channel attributes Jonathan Cameron
-- strict thread matches above, loose matches on Subject: below --
2012-06-04 9:36 Lars-Peter Clausen
2012-06-04 9:36 ` [PATCH 17/18] staging:iio:dac:ad5791: Move private structs and defines from header to C file Lars-Peter Clausen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FBA70B6.2080604@kernel.org \
--to=jic23@kernel.org \
--cc=jic23@cam.ac.uk \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).