From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <4FC732DF.7070509@nvidia.com> Date: Thu, 31 May 2012 14:29:11 +0530 From: Laxman Dewangan MIME-Version: 1.0 To: Jonathan Cameron CC: Leed Aguilar , "linux-iio@vger.kernel.org" Subject: Re: [PATCH] staging:iio:magnetometer:ak8975: set power-down mode after reading fuse ROM data References: <1338429137-27059-1-git-send-email-leed.aguilar@ti.com> <4FC71C06.6080403@kernel.org> In-Reply-To: <4FC71C06.6080403@kernel.org> Content-Type: text/plain; charset="ISO-8859-1"; format=flowed List-ID: On Thursday 31 May 2012 12:51 PM, Jonathan Cameron wrote: > Sounds sensible, but I don't have one of these so cc'ing Laxman >> Fuse ROM data access mode is the only mode which does not >> transition to power-down mode automatically. >> >> As per the AK8975 data sheet, it is recomended to set the >> power-down mode first before attempting to change into >> another mode. Acked-by: Laxman Dewangan I verified from datasheet that this is correct change. Thanks, Laxman ----------------------------------------------------------------------------------- This email message is for the sole use of the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. -----------------------------------------------------------------------------------