From: Jonathan Cameron <jic23@kernel.org>
To: Lars-Peter Clausen <lars@metafoo.de>
Cc: Jonathan Cameron <jic23@cam.ac.uk>, linux-iio@vger.kernel.org
Subject: Re: [PATCH 9/9] staging:iio:adc:ad799x: Use new triggered buffer setup helper function
Date: Thu, 07 Jun 2012 21:18:17 +0100 [thread overview]
Message-ID: <4FD10C89.8080506@kernel.org> (raw)
In-Reply-To: <1338983756-31243-10-git-send-email-lars@metafoo.de>
On 06/06/2012 12:55 PM, Lars-Peter Clausen wrote:
> Use the new triggered buffer setup helper function to allocate and register
> buffer and pollfunc.
>
> Also as part of the conversion drop scan_timestamp being enabled by default,
> since it is a left over of an earlier cleanup.
>
> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
> ---
> drivers/staging/iio/adc/Kconfig | 1 +
> drivers/staging/iio/adc/ad799x.h | 2 --
> drivers/staging/iio/adc/ad799x_core.c | 25 +++++++------
> drivers/staging/iio/adc/ad799x_ring.c | 63 ++-------------------------------
> 4 files changed, 19 insertions(+), 72 deletions(-)
>
> diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig
> index 36cca0e..6fa3264 100644
> --- a/drivers/staging/iio/adc/Kconfig
> +++ b/drivers/staging/iio/adc/Kconfig
> @@ -66,6 +66,7 @@ config AD799X_RING_BUFFER
> depends on AD799X
> select IIO_BUFFER
> select IIO_KFIFO_BUF
> + select IIO_TRIGGERED_BUFFER
> help
> Say yes here to include ring buffer support in the AD799X
> ADC driver.
> diff --git a/drivers/staging/iio/adc/ad799x.h b/drivers/staging/iio/adc/ad799x.h
> index 99f8abe..3e363c4 100644
> --- a/drivers/staging/iio/adc/ad799x.h
> +++ b/drivers/staging/iio/adc/ad799x.h
> @@ -120,8 +120,6 @@ struct ad799x_platform_data {
> u16 vref_mv;
> };
>
> -int ad7997_8_set_scan_mode(struct ad799x_state *st, unsigned mask);
> -
> #ifdef CONFIG_AD799X_RING_BUFFER
> int ad799x_register_ring_funcs_and_init(struct iio_dev *indio_dev);
> void ad799x_ring_cleanup(struct iio_dev *indio_dev);
> diff --git a/drivers/staging/iio/adc/ad799x_core.c b/drivers/staging/iio/adc/ad799x_core.c
> index 80e0c6e..2d4bda9 100644
> --- a/drivers/staging/iio/adc/ad799x_core.c
> +++ b/drivers/staging/iio/adc/ad799x_core.c
> @@ -99,10 +99,21 @@ static int ad799x_i2c_write8(struct ad799x_state *st, u8 reg, u8 data)
> return ret;
> }
>
> -int ad7997_8_set_scan_mode(struct ad799x_state *st, unsigned mask)
> +static int ad7997_8_update_scan_mode(struct iio_dev *indio_dev,
> + const unsigned long *scan_mask)
> {
> - return ad799x_i2c_write16(st, AD7998_CONF_REG,
> - st->config | (mask << AD799X_CHANNEL_SHIFT));
> + struct ad799x_state *st = iio_priv(indio_dev);
> +
> + switch (st->id) {
> + case ad7997:
> + case ad7998:
> + return ad799x_i2c_write16(st, AD7998_CONF_REG,
> + st->config | (*scan_mask << AD799X_CHANNEL_SHIFT));
> + default:
> + break;
> + }
> +
> + return 0;
> }
>
> static int ad799x_scan_direct(struct ad799x_state *st, unsigned ch)
> @@ -442,6 +453,7 @@ static const struct iio_info ad7993_4_7_8_info = {
> .read_event_value = &ad799x_read_event_value,
> .write_event_value = &ad799x_write_event_value,
> .driver_module = THIS_MODULE,
> + .update_scan_mode = ad7997_8_update_scan_mode,
> };
>
> #define AD799X_EV_MASK (IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING) | \
> @@ -887,12 +899,6 @@ static int __devinit ad799x_probe(struct i2c_client *client,
> if (ret)
> goto error_disable_reg;
>
> - ret = iio_buffer_register(indio_dev,
> - indio_dev->channels,
> - indio_dev->num_channels);
> - if (ret)
> - goto error_cleanup_ring;
> -
> if (client->irq > 0) {
> ret = request_threaded_irq(client->irq,
> NULL,
> @@ -934,7 +940,6 @@ static __devexit int ad799x_remove(struct i2c_client *client)
> if (client->irq > 0)
> free_irq(client->irq, indio_dev);
>
> - iio_buffer_unregister(indio_dev);
> ad799x_ring_cleanup(indio_dev);
> if (!IS_ERR(st->reg)) {
> regulator_disable(st->reg);
> diff --git a/drivers/staging/iio/adc/ad799x_ring.c b/drivers/staging/iio/adc/ad799x_ring.c
> index 1c7ff44..da8d468 100644
> --- a/drivers/staging/iio/adc/ad799x_ring.c
> +++ b/drivers/staging/iio/adc/ad799x_ring.c
> @@ -24,27 +24,6 @@
> #include "ad799x.h"
>
> /**
> - * ad799x_ring_preenable() setup the parameters of the ring before enabling
> - *
> - * The complex nature of the setting of the number of bytes per datum is due
> - * to this driver currently ensuring that the timestamp is stored at an 8
> - * byte boundary.
> - **/
> -static int ad799x_ring_preenable(struct iio_dev *indio_dev)
> -{
> - struct ad799x_state *st = iio_priv(indio_dev);
> - /*
> - * Need to figure out the current mode based upon the requested
> - * scan mask in iio_dev
> - */
> -
> - if (st->id == ad7997 || st->id == ad7998)
> - ad7997_8_set_scan_mode(st, *indio_dev->active_scan_mask);
> -
> - return iio_sw_buffer_preenable(indio_dev);
> -}
> -
> -/**
> * ad799x_trigger_handler() bh of trigger launched polling to ring buffer
> *
> * Currently there is no option in this driver to disable the saving of
> @@ -110,49 +89,13 @@ out:
> return IRQ_HANDLED;
> }
>
> -static const struct iio_buffer_setup_ops ad799x_buf_setup_ops = {
> - .preenable = &ad799x_ring_preenable,
> - .postenable = &iio_triggered_buffer_postenable,
> - .predisable = &iio_triggered_buffer_predisable,
> -};
> -
> int ad799x_register_ring_funcs_and_init(struct iio_dev *indio_dev)
> {
> - int ret = 0;
> -
> - indio_dev->buffer = iio_kfifo_allocate(indio_dev);
> - if (!indio_dev->buffer) {
> - ret = -ENOMEM;
> - goto error_ret;
> - }
> - indio_dev->pollfunc = iio_alloc_pollfunc(NULL,
> - &ad799x_trigger_handler,
> - IRQF_ONESHOT,
> - indio_dev,
> - "%s_consumer%d",
> - indio_dev->name,
> - indio_dev->id);
> - if (indio_dev->pollfunc == NULL) {
> - ret = -ENOMEM;
> - goto error_deallocate_kfifo;
> - }
> -
> - /* Ring buffer functions - here trigger setup related */
> - indio_dev->setup_ops = &ad799x_buf_setup_ops;
> - indio_dev->buffer->scan_timestamp = true;
> -
> - /* Flag that polled ring buffering is possible */
> - indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
> - return 0;
> -
> -error_deallocate_kfifo:
> - iio_kfifo_free(indio_dev->buffer);
> -error_ret:
> - return ret;
> + return iio_triggered_buffer_setup(indio_dev, NULL,
> + &ad799x_trigger_handler, NULL);
> }
>
> void ad799x_ring_cleanup(struct iio_dev *indio_dev)
> {
> - iio_dealloc_pollfunc(indio_dev->pollfunc);
> - iio_kfifo_free(indio_dev->buffer);
> + iio_triggered_buffer_cleanup(indio_dev);
> }
prev parent reply other threads:[~2012-06-07 20:18 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-06 11:55 [PATCH 0/9] iio: Add helper function for initializing triggered buffers Lars-Peter Clausen
2012-06-06 11:55 ` [PATCH 1/9] staging:iio: " Lars-Peter Clausen
2012-06-07 19:09 ` Jonathan Cameron
2012-06-08 7:47 ` Lars-Peter Clausen
2012-06-06 11:55 ` [PATCH 2/9] iio:adc:at91: Use new triggered buffer setup helper Lars-Peter Clausen
2012-06-07 20:02 ` Jonathan Cameron
2012-06-08 7:57 ` Lars-Peter Clausen
2012-06-08 7:59 ` Jonathan Cameron
2012-06-06 11:55 ` [PATCH 3/9] staging:iio:adc:ad7192: Use new triggered buffer setup helper function Lars-Peter Clausen
2012-06-07 20:06 ` Jonathan Cameron
2012-06-06 11:55 ` [PATCH 4/9] staging:iio:adc:ad7298: " Lars-Peter Clausen
2012-06-07 20:11 ` Jonathan Cameron
2012-06-06 11:55 ` [PATCH 5/9] staging:iio:adc:ad7476: " Lars-Peter Clausen
2012-06-07 20:12 ` Jonathan Cameron
2012-06-06 11:55 ` [PATCH 6/9] staging:iio:adc:ad7606: " Lars-Peter Clausen
2012-06-07 20:13 ` Jonathan Cameron
2012-06-07 20:14 ` Jonathan Cameron
2012-06-06 11:55 ` [PATCH 7/9] staging:iio:adc:ad7793: " Lars-Peter Clausen
2012-06-07 20:14 ` Jonathan Cameron
2012-06-06 11:55 ` [PATCH 8/9] staging:iio:adc:ad7887: " Lars-Peter Clausen
2012-06-07 20:15 ` Jonathan Cameron
2012-06-06 11:55 ` [PATCH 9/9] staging:iio:adc:ad799x: " Lars-Peter Clausen
2012-06-07 20:18 ` Jonathan Cameron [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FD10C89.8080506@kernel.org \
--to=jic23@kernel.org \
--cc=jic23@cam.ac.uk \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).