From: Jonathan Cameron <jic23@kernel.org>
To: Peter Meerwald <pmeerw@pmeerw.net>
Cc: linux-iio@vger.kernel.org
Subject: Re: [PATCH] iio: remove SENSORS_ from Kconfig
Date: Sun, 08 Jul 2012 18:05:41 +0100 [thread overview]
Message-ID: <4FF9BDE5.7050708@kernel.org> (raw)
In-Reply-To: <1339939206-19073-1-git-send-email-pmeerw@pmeerw.net>
On 06/17/2012 02:20 PM, Peter Meerwald wrote:
> IIO sensors are not supposed to be prefixed SENSORS_, cleanup for
> consistency
Hi Peter,
I held off on this one as it may cause some issues with peoples
defconfigs. It's a question of whether we really care...
I was hoping we'd get a few more opinions.
Anyone care either way?
>
> Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
> ---
> drivers/iio/light/Kconfig | 2 +-
> drivers/iio/light/Makefile | 2 +-
> drivers/staging/iio/light/Kconfig | 6 +++---
> drivers/staging/iio/light/Makefile | 6 +++---
> drivers/staging/iio/magnetometer/Kconfig | 4 ++--
> drivers/staging/iio/magnetometer/Makefile | 4 ++--
> 6 files changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
> index f3ea90d..8bc9675 100644
> --- a/drivers/iio/light/Kconfig
> +++ b/drivers/iio/light/Kconfig
> @@ -3,7 +3,7 @@
> #
> menu "Light sensors"
>
> -config SENSORS_LM3533
> +config LM3533
> tristate "LM3533 ambient light sensor"
> depends on MFD_LM3533
> help
> diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
> index 06fa4d3..5ae2737 100644
> --- a/drivers/iio/light/Makefile
> +++ b/drivers/iio/light/Makefile
> @@ -2,5 +2,5 @@
> # Makefile for IIO Light sensors
> #
>
> -obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o
> +obj-$(CONFIG_LM3533) += lm3533-als.o
> obj-$(CONFIG_VCNL4000) += vcnl4000.o
> diff --git a/drivers/staging/iio/light/Kconfig b/drivers/staging/iio/light/Kconfig
> index 4bed30e..0f251e4 100644
> --- a/drivers/staging/iio/light/Kconfig
> +++ b/drivers/staging/iio/light/Kconfig
> @@ -3,7 +3,7 @@
> #
> menu "Light sensors"
>
> -config SENSORS_ISL29018
> +config ISL29018
> tristate "ISL 29018 light and proximity sensor"
> depends on I2C
> select REGMAP_I2C
> @@ -15,7 +15,7 @@ config SENSORS_ISL29018
> in lux, proximity infrared sensing and normal infrared sensing.
> Data from sensor is accessible via sysfs.
>
> -config SENSORS_ISL29028
> +config ISL29028
> tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor"
> depends on I2C
> select REGMAP_I2C
> @@ -25,7 +25,7 @@ config SENSORS_ISL29028
> Proximity value via iio. The ISL29028 provides the concurrent sensing
> of ambient light and proximity.
>
> -config SENSORS_TSL2563
> +config TSL2563
> tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
> depends on I2C
> help
> diff --git a/drivers/staging/iio/light/Makefile b/drivers/staging/iio/light/Makefile
> index 141af1e..d718a07 100644
> --- a/drivers/staging/iio/light/Makefile
> +++ b/drivers/staging/iio/light/Makefile
> @@ -2,8 +2,8 @@
> # Makefile for industrial I/O Light sensors
> #
>
> -obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o
> -obj-$(CONFIG_SENSORS_ISL29018) += isl29018.o
> -obj-$(CONFIG_SENSORS_ISL29028) += isl29028.o
> +obj-$(CONFIG_TSL2563) += tsl2563.o
> +obj-$(CONFIG_ISL29018) += isl29018.o
> +obj-$(CONFIG_ISL29028) += isl29028.o
> obj-$(CONFIG_TSL2583) += tsl2583.o
> obj-$(CONFIG_TSL2x7x) += tsl2x7x_core.o
> diff --git a/drivers/staging/iio/magnetometer/Kconfig b/drivers/staging/iio/magnetometer/Kconfig
> index df5e0d4..84a6c0f 100644
> --- a/drivers/staging/iio/magnetometer/Kconfig
> +++ b/drivers/staging/iio/magnetometer/Kconfig
> @@ -3,7 +3,7 @@
> #
> menu "Magnetometer sensors"
>
> -config SENSORS_AK8975
> +config AK8975
> tristate "Asahi Kasei AK8975 3-Axis Magnetometer"
> depends on I2C
> depends on GPIOLIB
> @@ -14,7 +14,7 @@ config SENSORS_AK8975
> To compile this driver as a module, choose M here: the module
> will be called ak8975.
>
> -config SENSORS_HMC5843
> +config HMC5843
> tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer"
> depends on I2C
> help
> diff --git a/drivers/staging/iio/magnetometer/Makefile b/drivers/staging/iio/magnetometer/Makefile
> index f2a753f..79331bb 100644
> --- a/drivers/staging/iio/magnetometer/Makefile
> +++ b/drivers/staging/iio/magnetometer/Makefile
> @@ -2,5 +2,5 @@
> # Makefile for industrial I/O Magnetometer sensors
> #
>
> -obj-$(CONFIG_SENSORS_AK8975) += ak8975.o
> -obj-$(CONFIG_SENSORS_HMC5843) += hmc5843.o
> +obj-$(CONFIG_AK8975) += ak8975.o
> +obj-$(CONFIG_HMC5843) += hmc5843.o
>
next prev parent reply other threads:[~2012-07-08 17:05 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-17 13:20 [PATCH] iio: remove SENSORS_ from Kconfig Peter Meerwald
2012-07-08 17:05 ` Jonathan Cameron [this message]
2012-07-08 18:37 ` Peter Meerwald
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FF9BDE5.7050708@kernel.org \
--to=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).