From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from saturn.retrosnub.co.uk ([178.18.118.26]:33216 "EHLO saturn.retrosnub.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752367Ab3AARni (ORCPT ); Tue, 1 Jan 2013 12:43:38 -0500 Message-ID: <50E32049.8040508@kernel.org> Date: Tue, 01 Jan 2013 17:43:37 +0000 From: Jonathan Cameron MIME-Version: 1.0 To: Peter Meerwald CC: linux-iio@vger.kernel.org Subject: Re: [PATCH 2/2] iio: max1363 comment and whitespace fixes References: <1356910018-14422-1-git-send-email-pmeerw@pmeerw.net> <1356910018-14422-2-git-send-email-pmeerw@pmeerw.net> In-Reply-To: <1356910018-14422-2-git-send-email-pmeerw@pmeerw.net> Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-iio-owner@vger.kernel.org List-Id: linux-iio@vger.kernel.org On 12/30/2012 11:26 PM, Peter Meerwald wrote: > Signed-off-by: Peter Meerwald Applied to togreg branch of iio.git Thanks, > --- > drivers/iio/adc/max1363.c | 15 +++++++-------- > 1 file changed, 7 insertions(+), 8 deletions(-) > > diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c > index 46d8365..0ba4fea 100644 > --- a/drivers/iio/adc/max1363.c > +++ b/drivers/iio/adc/max1363.c > @@ -56,7 +56,7 @@ > #define MAX1363_SETUP_POWER_UP_INT_REF 0x10 > #define MAX1363_SETUP_POWER_DOWN_INT_REF 0x00 > > -/* think about includeing max11600 etc - more settings */ > +/* think about including max11600 etc - more settings */ > #define MAX1363_SETUP_EXT_CLOCK 0x08 > #define MAX1363_SETUP_INT_CLOCK 0x00 > #define MAX1363_SETUP_UNIPOLAR 0x00 > @@ -87,7 +87,7 @@ > /* max123{6-9} only */ > #define MAX1236_SCAN_MID_TO_CHANNEL 0x40 > > -/* max1363 only - merely part of channel selects or don't care for others*/ > +/* max1363 only - merely part of channel selects or don't care for others */ > #define MAX1363_CONFIG_EN_MON_MODE_READ 0x18 > > #define MAX1363_CHANNEL_SEL(a) ((a) << 1) > @@ -134,7 +134,7 @@ enum max1363_modes { > * @mode_list: array of available scan modes > * @default_mode: the scan mode in which the chip starts up > * @int_vref_mv: the internal reference voltage > - * @num_channels: number of channels > + * @num_modes: number of modes > * @bits: accuracy of the adc in bits > */ > struct max1363_chip_info { > @@ -153,7 +153,7 @@ struct max1363_chip_info { > * @client: i2c_client > * @setupbyte: cache of current device setup byte > * @configbyte: cache of current device config byte > - * @chip_info: chip model specific constants, available modes etc > + * @chip_info: chip model specific constants, available modes, etc. > * @current_mode: the scan mode of this chip > * @requestedmask: a valid requested set of channels > * @reg: supply regulator > @@ -294,7 +294,7 @@ static const struct max1363_mode max1363_mode_table[] = { > > static const struct max1363_mode > *max1363_match_mode(const unsigned long *mask, > -const struct max1363_chip_info *ci) > + const struct max1363_chip_info *ci) > { > int i; > if (mask) > @@ -1395,7 +1395,7 @@ static int max1363_initial_setup(struct max1363_state *st) > | MAX1363_SETUP_UNIPOLAR > | MAX1363_SETUP_NORESET; > > - /* Set scan mode writes the config anyway so wait until then*/ > + /* Set scan mode writes the config anyway so wait until then */ > st->setupbyte = MAX1363_SETUP_BYTE(st->setupbyte); > st->current_mode = &max1363_mode_table[st->chip_info->default_mode]; > st->configbyte = MAX1363_CONFIG_BYTE(st->configbyte); > @@ -1424,7 +1424,6 @@ static int __devinit max1363_alloc_scan_masks(struct iio_dev *indio_dev) > return 0; > } > > - > static irqreturn_t max1363_trigger_handler(int irq, void *p) > { > struct iio_poll_func *pf = p; > @@ -1523,7 +1522,7 @@ static int __devinit max1363_probe(struct i2c_client *client, > if (ret) > goto error_disable_reg; > > - /* Estabilish that the iio_dev is a child of the i2c device */ > + /* Establish that the iio_dev is a child of the i2c device */ > indio_dev->dev.parent = &client->dev; > indio_dev->name = id->name; > indio_dev->channels = st->chip_info->channels; >