From: Jonathan Cameron <jic23@kernel.org>
To: Greg KH <gregkh@linuxfoundation.org>
Cc: "linux-iio@vger.kernel.org" <linux-iio@vger.kernel.org>
Subject: [PULL] IIO cleanups, new drivers and fixes (IIO set 4 for the 3.9 cycle)
Date: Sun, 10 Feb 2013 21:38:48 +0000 [thread overview]
Message-ID: <51181368.8070107@kernel.org> (raw)
The following changes since commit 82e9ee616a89f152f42c7051c5f9f5f0d7663652:
staging: comedi: ni_mio_cs: use pcmcia_request_irq() (2013-02-05 18:16:19 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-3.9d
for you to fetch changes up to 09a642b78523e9f4c5970c806ad218aa3de31551:
Invensense MPU6050 Device Driver. (2013-02-10 17:42:43 +0000)
----------------------------------------------------------------
4th set of IIO new drivers cleanups and fixes for the 3.9 cycle
+ a new spi helper function.
1) Introduce spi_sync_transfer and use it within IIO. Originally
it was envisioned that this nice little boilerplate replacement
would go through the spi tree, but Grant Likely stated he'd
prefer we take it through IIO as the example usecases were all
in IIO (and are also in this pull request). Note that given
their may have been some unresolved elements related to the
coccinelle element of the patch, that has been stripped out
and will doubtlessly follow at a later date (along with
lots of other patches for drivers elsewhere in the tree).
2) New Invensense MPU6050 driver. This is stripped down to pretty
much the basics from the original submission with the intent
to build up all the fancy bits in an incremental (and hence
reviewable fashion). It's been through a good few revisions
so nice to finally merge this.
3) Change to iio_channel_get api to simplify device tree based
mappings. The actual mappings are currently under review.
4) Build fixes for !CONFIG_IIO_TRIGGER in the st_sensors driver.
This one snuck past during review and testing but got picked
up by Randy Dunlap in a randconfig build.
5) Some max1363 cleanups and enhancements.
6) Some comment fixes to make them coherent and comprehensible.
7) Trivial build warning fix in mxs-lradc
----------------------------------------------------------------
Denis CIOCCA (1):
iio:common: added allocate and deallocate trigger functions when trigger is disabled.
Fabio Estevam (1):
iio: mxs-lradc: Fix 'duplicate const' warning
Ge Gao (1):
Invensense MPU6050 Device Driver.
Guenter Roeck (3):
iio: max1363: Use devm_ functions whereever possible to allocate resources
iio/adc: (max1363) Add support for external reference voltage
iio: Update iio_channel_get API to use consumer device pointer as argument
Jonathan Cameron (2):
iio:triggers Protect functions in triggers.h from use when not compiled
iio:st_sensors fix build when !CONFIG_IIO_TRIGGER
Lars-Peter Clausen (3):
spi: Add helper functions for setting up transfers
iio: Use spi_sync_transfer()
staging:iio: Use spi_sync_transfer()
Peter Meerwald (1):
iio: tweak language in industrialio-trigger comments
Documentation/ABI/testing/sysfs-bus-iio-mpu6050 | 13 +
drivers/extcon/extcon-adc-jack.c | 3 +-
drivers/iio/accel/kxsd9.c | 6 +-
drivers/iio/accel/st_accel_core.c | 9 +-
drivers/iio/accel/st_accel_i2c.c | 1 -
drivers/iio/accel/st_accel_spi.c | 1 -
drivers/iio/adc/max1363.c | 81 ++-
drivers/iio/dac/ad5360.c | 7 +-
drivers/iio/dac/ad5421.c | 7 +-
drivers/iio/dac/ad5504.c | 6 +-
drivers/iio/dac/ad5686.c | 7 +-
drivers/iio/dac/ad5755.c | 7 +-
drivers/iio/dac/ad5764.c | 7 +-
drivers/iio/dac/ad5791.c | 6 +-
drivers/iio/frequency/ad9523.c | 14 +-
drivers/iio/gyro/adxrs450.c | 5 +-
drivers/iio/gyro/st_gyro_core.c | 9 +-
drivers/iio/gyro/st_gyro_i2c.c | 1 -
drivers/iio/gyro/st_gyro_spi.c | 1 -
drivers/iio/imu/Kconfig | 2 +
drivers/iio/imu/Makefile | 2 +
drivers/iio/imu/inv_mpu6050/Kconfig | 13 +
drivers/iio/imu/inv_mpu6050/Makefile | 6 +
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 795 +++++++++++++++++++++++
drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 246 +++++++
drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 196 ++++++
drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 155 +++++
drivers/iio/industrialio-trigger.c | 12 +-
drivers/iio/inkern.c | 11 +-
drivers/iio/magnetometer/st_magn_core.c | 1 -
drivers/iio/magnetometer/st_magn_i2c.c | 1 -
drivers/iio/magnetometer/st_magn_spi.c | 1 -
drivers/power/generic-adc-battery.c | 4 +-
drivers/power/lp8788-charger.c | 8 +-
drivers/staging/iio/accel/lis3l02dq_core.c | 18 +-
drivers/staging/iio/accel/sca3000_core.c | 13 +-
drivers/staging/iio/accel/sca3000_ring.c | 6 +-
drivers/staging/iio/adc/ad7280a.c | 6 +-
drivers/staging/iio/adc/mxs-lradc.c | 2 +-
drivers/staging/iio/frequency/ad5930.c | 5 +-
drivers/staging/iio/frequency/ad9850.c | 5 +-
drivers/staging/iio/frequency/ad9852.c | 5 +-
drivers/staging/iio/meter/ade7753.c | 6 +-
drivers/staging/iio/meter/ade7754.c | 5 +-
drivers/staging/iio/meter/ade7758_core.c | 28 +-
drivers/staging/iio/meter/ade7759.c | 5 +-
drivers/staging/iio/meter/ade7854-spi.c | 44 +-
drivers/staging/iio/resolver/ad2s1210.c | 5 +-
include/linux/iio/common/st_sensors.h | 10 +
include/linux/iio/consumer.h | 5 +-
include/linux/iio/trigger.h | 5 +
include/linux/platform_data/invensense_mpu6050.h | 31 +
include/linux/spi/spi.h | 44 ++
53 files changed, 1646 insertions(+), 246 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-mpu6050
create mode 100644 drivers/iio/imu/inv_mpu6050/Kconfig
create mode 100644 drivers/iio/imu/inv_mpu6050/Makefile
create mode 100644 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
create mode 100644 drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
create mode 100644 drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
create mode 100644 drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
create mode 100644 include/linux/platform_data/invensense_mpu6050.h
next reply other threads:[~2013-02-10 21:38 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-10 21:38 Jonathan Cameron [this message]
2013-02-11 18:00 ` [PULL] IIO cleanups, new drivers and fixes (IIO set 4 for the 3.9 cycle) Greg KH
2013-02-11 19:54 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51181368.8070107@kernel.org \
--to=jic23@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox