From: Jonathan Cameron <jic23@kernel.org>
To: Peter Meerwald <pmeerw@pmeerw.net>
Cc: linux-iio@vger.kernel.org, Jon Brenner - TAOS <jbrenner@taosinc.com>
Subject: Re: [PATCH] iio: add tsl45315 als driver
Date: Sun, 02 Jun 2013 16:41:57 +0100 [thread overview]
Message-ID: <51AB67C5.3000207@kernel.org> (raw)
In-Reply-To: <1370122842-27056-1-git-send-email-pmeerw@pmeerw.net>
On 06/01/2013 10:40 PM, Peter Meerwald wrote:
> Add driver for the TAOS 4531x family of I2C ambient light sensors; the chip
> outputs a 16-bit lux value.
>
> RFCs:
> (1) naming: tsl45315 or tsl4531x or tsl4531? I just happend to have/test the 45315
tsl45315 (first product supported). I always argue against wild cards unless there
is a fairly strong guarantee that another incompatible part won't have a number covered
by the wild card (i.e. if all possible options already exist ;)
> (2) tsl45315_id is not really used, the variants just have different i2c addresses
> and i2c voltages; drop?
Yes.
> (3) integration_time: driver uses tsl45315_ext_info to set/get the interation time
> in_illuminance_integration_time (0 .. 400ms, 1 .. 200ms, 2 .. 100ms) which affects
> in_illuminance_scale (1x, 2x, 4x) in order to produce lux when multiplied with
> in_illuminance_raw; ok? better way to represent?
Hmm.. If it doesn't effect anything else, I'd probably drop integration_time
and just have it controlled by in_illuminance_scale. From a userspace point of
view, I doubt any application will care about the difference. Anyone else have
any thoughts on this? This is far from the first device with controllable integration
times, but I guess we have just fudged around it so far?
Incindentally it is refereshing to not have to deal with horrible non linear
conversions in a light sensor :) Nice clean driver btw. Only bit
I'd pick you up on is that you didn't add documentation for the integration_time
attribute but as you were asking whether to do it that way we can let that go ;)
Have cc'd Jon as he is usually responsive on drivers for TAOS parts when he
is not snowed under.
Jonathan
>
> ---
> drivers/iio/light/Kconfig | 10 ++
> drivers/iio/light/Makefile | 1 +
> drivers/iio/light/tsl45315.c | 263 +++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 274 insertions(+)
> create mode 100644 drivers/iio/light/tsl45315.c
>
> diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
> index 5ef1a39..c1dfd57 100644
> --- a/drivers/iio/light/Kconfig
> +++ b/drivers/iio/light/Kconfig
> @@ -42,6 +42,16 @@ config SENSORS_TSL2563
> This driver can also be built as a module. If so, the module
> will be called tsl2563.
>
> +config TSL45315
> + tristate "TAOS TSL45311, TSL45313, TSL45315, TSL45317 ambient light sensors"
> + depends on I2C
> + help
> + Say Y here if you want to build a driver for the TAOS TSL4531x family
> + of ambient light sensors with direct lux output.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called tsl45315.
> +
> config VCNL4000
> tristate "VCNL4000 combined ALS and proximity sensor"
> depends on I2C
> diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
> index 040d9c7..333c292 100644
> --- a/drivers/iio/light/Makefile
> +++ b/drivers/iio/light/Makefile
> @@ -5,5 +5,6 @@
> obj-$(CONFIG_ADJD_S311) += adjd_s311.o
> obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o
> obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o
> +obj-$(CONFIG_TSL45315) += tsl45315.o
> obj-$(CONFIG_VCNL4000) += vcnl4000.o
> obj-$(CONFIG_HID_SENSOR_ALS) += hid-sensor-als.o
> diff --git a/drivers/iio/light/tsl45315.c b/drivers/iio/light/tsl45315.c
> new file mode 100644
> index 0000000..41c173d
> --- /dev/null
> +++ b/drivers/iio/light/tsl45315.c
> @@ -0,0 +1,263 @@
> +/*
> + * tsl45315.c - Support for TAOS TSL45315 ambient light sensor
> + *
> + * Copyright 2013 Peter Meerwald <pmeerw@pmeerw.net>
> + *
> + * This file is subject to the terms and conditions of version 2 of
> + * the GNU General Public License. See the file COPYING in the main
> + * directory of this archive for more details.
> + *
> + * IIO driver for the TSL4531x family
> + * TSL45311/TSL45313: 7-bit I2C slave address 0x39
> + * TSL45315/TSL45317: 7-bit I2C slave address 0x29
> + */
> +
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/err.h>
> +#include <linux/delay.h>
> +
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +
> +#define TSL45315_DRV_NAME "tsl45315"
> +
> +#define TSL45315_CONTROL 0x80
> +#define TSL45315_CONFIG 0x81
> +#define TSL45315_DATALOW 0x84
> +#define TSL45315_DATAHIGH 0x85
> +#define TSL45315_ID 0x8a
> +
> +#define TSL45315_MODE_POWERDOWN 0x00
> +#define TSL45315_MODE_SINGLE_ADC 0x02
> +#define TSL45315_MODE_NORMAL 0x03
> +
> +struct tsl45315_data {
> + struct i2c_client *client;
> + int int_time; /* 0 .. 400ms, 1 .. 200ms, 2 .. 100ms */
> +};
> +
> +static const struct i2c_device_id tsl45315_id[] = {
> + { "tsl45311", 0 },
> + { "tsl45313", 1 },
> + { "tsl45315", 2 },
> + { "tsl45317", 3 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, tsl45315_id);
> +
> +static int tsl45315_measure(struct tsl45315_data *data, int *val)
> +{
> + u16 buf;
> + int ret;
> +
> + ret = i2c_smbus_read_i2c_block_data(data->client,
> + TSL45315_DATALOW, sizeof(buf), (u8 *) &buf);
> + if (ret < 0)
> + return ret;
> +
> + *val = le16_to_cpu(buf);
> +
> + return 0;
> +}
> +
> +static ssize_t tsl45315_read_int_time(struct iio_dev *indio_dev,
> + uintptr_t private, const struct iio_chan_spec *chan, char *buf)
> +{
> + struct tsl45315_data *data = iio_priv(indio_dev);
> + s32 ret;
> +
> + ret = i2c_smbus_read_byte_data(data->client, TSL45315_CONFIG);
> + if (ret < 0)
> + return ret;
> +
> + return sprintf(buf, "%d\n", ret & 0x03);
> +}
> +
> +static ssize_t tsl45315_write_int_time(struct iio_dev *indio_dev,
> + uintptr_t private, const struct iio_chan_spec *chan, const char *buf,
> + size_t len)
> +{
> + struct tsl45315_data *data = iio_priv(indio_dev);
> + unsigned long int_time;
> + int ret;
> +
> + ret = kstrtoul(buf, 10, &int_time);
> + if (ret)
> + return ret;
> +
> + if (int_time > 2)
> + return -EINVAL;
> +
> + ret = i2c_smbus_write_byte_data(data->client,
> + TSL45315_CONFIG, int_time);
> + if (ret < 0)
> + return ret;
> +
> + data->int_time = int_time;
> +
> + return len;
> +}
> +
> +static const struct iio_chan_spec_ext_info tsl45315_ext_info[] = {
> + {
> + .name = "integration_time",
> + .read = tsl45315_read_int_time,
> + .write = tsl45315_write_int_time,
> + },
> + { }
> +};
> +
> +static const struct iio_chan_spec tsl45315_channels[] = {
> + {
> + .type = IIO_LIGHT,
> + .ext_info = tsl45315_ext_info,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> + BIT(IIO_CHAN_INFO_SCALE)
> + }
> +};
> +
> +static int tsl45315_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long mask)
> +{
> + int ret = -EINVAL;
> + struct tsl45315_data *data = iio_priv(indio_dev);
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + switch (chan->type) {
> + case IIO_LIGHT:
> + ret = tsl45315_measure(data, val);
> + if (ret < 0)
> + return ret;
> + ret = IIO_VAL_INT;
> + break;
> + default:
> + break;
> + }
> + break;
> + case IIO_CHAN_INFO_SCALE:
> + if (chan->type == IIO_LIGHT) {
> + /* 0.. 1x, 1 .. 2x, 2 .. 4x */
> + *val = 1 << data->int_time;
> + ret = IIO_VAL_INT;
> + }
> + break;
> + default:
> + break;
> + }
> +
> + return ret;
> +}
> +
> +static const struct iio_info tsl45315_info = {
> + .read_raw = tsl45315_read_raw,
> + .driver_module = THIS_MODULE,
> +};
> +
> +static int tsl45315_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct tsl45315_data *data;
> + struct iio_dev *indio_dev;
> + int ret;
> +
> + indio_dev = iio_device_alloc(sizeof(*data));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + data = iio_priv(indio_dev);
> + i2c_set_clientdata(client, indio_dev);
> + data->client = client;
> +
> + ret = i2c_smbus_read_byte_data(data->client, TSL45315_ID);
> + if (ret < 0)
> + goto error_free_dev;
> +
> + dev_info(&client->dev, "TSL4531x Ambient light sensor, Id %02x\n",
> + ret >> 4);
> +
> + ret = i2c_smbus_write_byte_data(data->client, TSL45315_CONTROL,
> + TSL45315_MODE_NORMAL);
> + if (ret < 0)
> + goto error_free_dev;
> +
> + ret = i2c_smbus_write_byte_data(data->client, TSL45315_CONFIG, 0);
> + if (ret < 0)
> + goto error_free_dev;
> +
> + indio_dev->dev.parent = &client->dev;
> + indio_dev->info = &tsl45315_info;
> + indio_dev->channels = tsl45315_channels;
> + indio_dev->num_channels = ARRAY_SIZE(tsl45315_channels);
> + indio_dev->name = TSL45315_DRV_NAME;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> +
> + ret = iio_device_register(indio_dev);
> + if (ret < 0)
> + goto error_free_dev;
> +
> + return 0;
> +
> +error_free_dev:
> + iio_device_free(indio_dev);
> + return ret;
> +}
> +
> +static int tsl45315_remove(struct i2c_client *client)
> +{
> + struct iio_dev *indio_dev = i2c_get_clientdata(client);
> +
> + iio_device_unregister(indio_dev);
> + iio_device_free(indio_dev);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int tsl45315_suspend(struct device *dev)
> +{
> + struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> + struct tsl45315_data *data = iio_priv(indio_dev);
> + int ret;
> +
> + ret = i2c_smbus_write_byte_data(data->client, TSL45315_CONTROL,
> + TSL45315_MODE_POWERDOWN);
> +
> + return ret;
> +}
> +
> +static int tsl45315_resume(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + int ret;
> +
> + ret = i2c_smbus_write_byte_data(client, TSL45315_CONTROL,
> + TSL45315_MODE_NORMAL);
> +
> + return ret;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(tsl45315_pm_ops, tsl45315_suspend, tsl45315_resume);
> +#define TSL45315_PM_OPS (&tsl45315_pm_ops)
> +#else
> +#define TSL45315_PM_OPS NULL
> +#endif
> +
> +static struct i2c_driver tsl45315_driver = {
> + .driver = {
> + .name = TSL45315_DRV_NAME,
> + .pm = TSL45315_PM_OPS,
> + .owner = THIS_MODULE,
> + },
> + .probe = tsl45315_probe,
> + .remove = tsl45315_remove,
> + .id_table = tsl45315_id,
> +};
> +
> +module_i2c_driver(tsl45315_driver);
> +
> +MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
> +MODULE_DESCRIPTION("TAOS TSL45315 ambient light sensor driver");
> +MODULE_LICENSE("GPL");
>
prev parent reply other threads:[~2013-06-02 15:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-01 21:40 [PATCH] iio: add tsl45315 als driver Peter Meerwald
2013-06-02 15:41 ` Jonathan Cameron [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51AB67C5.3000207@kernel.org \
--to=jic23@kernel.org \
--cc=jbrenner@taosinc.com \
--cc=linux-iio@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).