* Fix buffers registrations in order to use generic IIO trigger
@ 2013-09-18 9:00 Denis CIOCCA
2013-09-18 9:00 ` [PATCH 1/4] iio:accel: Register buffer also without specific trigger Denis CIOCCA
` (4 more replies)
0 siblings, 5 replies; 12+ messages in thread
From: Denis CIOCCA @ 2013-09-18 9:00 UTC (permalink / raw)
To: jic23, linux-iio; +Cc: lee.jones
Hi All,
This patches fix buffers registrations in order to use generic IIO trigger.
Thanks,
Denis
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/4] iio:accel: Register buffer also without specific trigger
2013-09-18 9:00 Fix buffers registrations in order to use generic IIO trigger Denis CIOCCA
@ 2013-09-18 9:00 ` Denis CIOCCA
2013-09-21 14:43 ` Jonathan Cameron
2013-09-18 9:00 ` [PATCH 2/4] iio:gyro: " Denis CIOCCA
` (3 subsequent siblings)
4 siblings, 1 reply; 12+ messages in thread
From: Denis CIOCCA @ 2013-09-18 9:00 UTC (permalink / raw)
To: jic23, linux-iio; +Cc: lee.jones, Denis Ciocca
This patch fix buffer registration that allows to use generic IIO trigger.
Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
---
drivers/iio/accel/st_accel_core.c | 19 +++++++++----------
1 file changed, 9 insertions(+), 10 deletions(-)
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 1458343..1bbdc8f 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -480,13 +480,13 @@ int st_accel_common_probe(struct iio_dev *indio_dev,
if (err < 0)
goto st_accel_common_probe_error;
- if (adata->get_irq_data_ready(indio_dev) > 0) {
- err = st_accel_allocate_ring(indio_dev);
- if (err < 0)
- goto st_accel_common_probe_error;
+ err = st_accel_allocate_ring(indio_dev);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+ if (adata->get_irq_data_ready(indio_dev) > 0) {
err = st_sensors_allocate_trigger(indio_dev,
- ST_ACCEL_TRIGGER_OPS);
+ ST_ACCEL_TRIGGER_OPS);
if (err < 0)
goto st_accel_probe_trigger_error;
}
@@ -501,8 +501,7 @@ st_accel_device_register_error:
if (adata->get_irq_data_ready(indio_dev) > 0)
st_sensors_deallocate_trigger(indio_dev);
st_accel_probe_trigger_error:
- if (adata->get_irq_data_ready(indio_dev) > 0)
- st_accel_deallocate_ring(indio_dev);
+ st_accel_deallocate_ring(indio_dev);
st_accel_common_probe_error:
return err;
}
@@ -513,10 +512,10 @@ void st_accel_common_remove(struct iio_dev *indio_dev)
struct st_sensor_data *adata = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
- if (adata->get_irq_data_ready(indio_dev) > 0) {
+ if (adata->get_irq_data_ready(indio_dev) > 0)
st_sensors_deallocate_trigger(indio_dev);
- st_accel_deallocate_ring(indio_dev);
- }
+
+ st_accel_deallocate_ring(indio_dev);
}
EXPORT_SYMBOL(st_accel_common_remove);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/4] iio:gyro: Register buffer also without specific trigger
2013-09-18 9:00 Fix buffers registrations in order to use generic IIO trigger Denis CIOCCA
2013-09-18 9:00 ` [PATCH 1/4] iio:accel: Register buffer also without specific trigger Denis CIOCCA
@ 2013-09-18 9:00 ` Denis CIOCCA
2013-09-21 14:50 ` Jonathan Cameron
2013-09-18 9:00 ` [PATCH 3/4] iio:magn: " Denis CIOCCA
` (2 subsequent siblings)
4 siblings, 1 reply; 12+ messages in thread
From: Denis CIOCCA @ 2013-09-18 9:00 UTC (permalink / raw)
To: jic23, linux-iio; +Cc: lee.jones, Denis Ciocca
This patch fix buffer registration that allows to use generic IIO trigger.
Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
---
drivers/iio/gyro/st_gyro_core.c | 19 +++++++++----------
1 file changed, 9 insertions(+), 10 deletions(-)
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
index e13c2b0..8a45d43 100644
--- a/drivers/iio/gyro/st_gyro_core.c
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -329,13 +329,13 @@ int st_gyro_common_probe(struct iio_dev *indio_dev,
if (err < 0)
goto st_gyro_common_probe_error;
- if (gdata->get_irq_data_ready(indio_dev) > 0) {
- err = st_gyro_allocate_ring(indio_dev);
- if (err < 0)
- goto st_gyro_common_probe_error;
+ err = st_gyro_allocate_ring(indio_dev);
+ if (err < 0)
+ goto st_gyro_common_probe_error;
+ if (gdata->get_irq_data_ready(indio_dev) > 0) {
err = st_sensors_allocate_trigger(indio_dev,
- ST_GYRO_TRIGGER_OPS);
+ ST_GYRO_TRIGGER_OPS);
if (err < 0)
goto st_gyro_probe_trigger_error;
}
@@ -350,8 +350,7 @@ st_gyro_device_register_error:
if (gdata->get_irq_data_ready(indio_dev) > 0)
st_sensors_deallocate_trigger(indio_dev);
st_gyro_probe_trigger_error:
- if (gdata->get_irq_data_ready(indio_dev) > 0)
- st_gyro_deallocate_ring(indio_dev);
+ st_gyro_deallocate_ring(indio_dev);
st_gyro_common_probe_error:
return err;
}
@@ -362,10 +361,10 @@ void st_gyro_common_remove(struct iio_dev *indio_dev)
struct st_sensor_data *gdata = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
- if (gdata->get_irq_data_ready(indio_dev) > 0) {
+ if (gdata->get_irq_data_ready(indio_dev) > 0)
st_sensors_deallocate_trigger(indio_dev);
- st_gyro_deallocate_ring(indio_dev);
- }
+
+ st_gyro_deallocate_ring(indio_dev);
}
EXPORT_SYMBOL(st_gyro_common_remove);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 3/4] iio:magn: Register buffer also without specific trigger
2013-09-18 9:00 Fix buffers registrations in order to use generic IIO trigger Denis CIOCCA
2013-09-18 9:00 ` [PATCH 1/4] iio:accel: Register buffer also without specific trigger Denis CIOCCA
2013-09-18 9:00 ` [PATCH 2/4] iio:gyro: " Denis CIOCCA
@ 2013-09-18 9:00 ` Denis CIOCCA
2013-09-21 14:50 ` Jonathan Cameron
2013-09-18 9:00 ` [PATCH 4/4] iio:press: " Denis CIOCCA
2013-09-18 11:20 ` Fix buffers registrations in order to use generic IIO trigger Lee Jones
4 siblings, 1 reply; 12+ messages in thread
From: Denis CIOCCA @ 2013-09-18 9:00 UTC (permalink / raw)
To: jic23, linux-iio; +Cc: lee.jones, Denis Ciocca
This patch fix buffer registration that allows to use generic IIO trigger.
Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
---
drivers/iio/magnetometer/st_magn_core.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index e8d2849..0de49f8 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -372,10 +372,11 @@ int st_magn_common_probe(struct iio_dev *indio_dev,
if (err < 0)
goto st_magn_common_probe_error;
+ err = st_magn_allocate_ring(indio_dev);
+ if (err < 0)
+ goto st_magn_common_probe_error;
+
if (mdata->get_irq_data_ready(indio_dev) > 0) {
- err = st_magn_allocate_ring(indio_dev);
- if (err < 0)
- goto st_magn_common_probe_error;
err = st_sensors_allocate_trigger(indio_dev, NULL);
if (err < 0)
goto st_magn_probe_trigger_error;
@@ -391,8 +392,7 @@ st_magn_device_register_error:
if (mdata->get_irq_data_ready(indio_dev) > 0)
st_sensors_deallocate_trigger(indio_dev);
st_magn_probe_trigger_error:
- if (mdata->get_irq_data_ready(indio_dev) > 0)
- st_magn_deallocate_ring(indio_dev);
+ st_magn_deallocate_ring(indio_dev);
st_magn_common_probe_error:
return err;
}
@@ -403,10 +403,10 @@ void st_magn_common_remove(struct iio_dev *indio_dev)
struct st_sensor_data *mdata = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
- if (mdata->get_irq_data_ready(indio_dev) > 0) {
+ if (mdata->get_irq_data_ready(indio_dev) > 0)
st_sensors_deallocate_trigger(indio_dev);
- st_magn_deallocate_ring(indio_dev);
- }
+
+ st_magn_deallocate_ring(indio_dev);
}
EXPORT_SYMBOL(st_magn_common_remove);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 4/4] iio:press: Register buffer also without specific trigger
2013-09-18 9:00 Fix buffers registrations in order to use generic IIO trigger Denis CIOCCA
` (2 preceding siblings ...)
2013-09-18 9:00 ` [PATCH 3/4] iio:magn: " Denis CIOCCA
@ 2013-09-18 9:00 ` Denis CIOCCA
2013-09-21 14:51 ` Jonathan Cameron
2013-09-18 11:20 ` Fix buffers registrations in order to use generic IIO trigger Lee Jones
4 siblings, 1 reply; 12+ messages in thread
From: Denis CIOCCA @ 2013-09-18 9:00 UTC (permalink / raw)
To: jic23, linux-iio; +Cc: lee.jones, Denis Ciocca
This patch fix buffer registration that allows to use generic IIO trigger.
Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
---
drivers/iio/pressure/st_pressure_core.c | 17 ++++++++---------
1 file changed, 8 insertions(+), 9 deletions(-)
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index 93bff9b..312a093 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -262,11 +262,11 @@ int st_press_common_probe(struct iio_dev *indio_dev,
if (err < 0)
goto st_press_common_probe_error;
- if (pdata->get_irq_data_ready(indio_dev) > 0) {
- err = st_press_allocate_ring(indio_dev);
- if (err < 0)
- goto st_press_common_probe_error;
+ err = st_press_allocate_ring(indio_dev);
+ if (err < 0)
+ goto st_press_common_probe_error;
+ if (pdata->get_irq_data_ready(indio_dev) > 0) {
err = st_sensors_allocate_trigger(indio_dev,
ST_PRESS_TRIGGER_OPS);
if (err < 0)
@@ -283,8 +283,7 @@ st_press_device_register_error:
if (pdata->get_irq_data_ready(indio_dev) > 0)
st_sensors_deallocate_trigger(indio_dev);
st_press_probe_trigger_error:
- if (pdata->get_irq_data_ready(indio_dev) > 0)
- st_press_deallocate_ring(indio_dev);
+ st_press_deallocate_ring(indio_dev);
st_press_common_probe_error:
return err;
}
@@ -295,10 +294,10 @@ void st_press_common_remove(struct iio_dev *indio_dev)
struct st_sensor_data *pdata = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
- if (pdata->get_irq_data_ready(indio_dev) > 0) {
+ if (pdata->get_irq_data_ready(indio_dev) > 0)
st_sensors_deallocate_trigger(indio_dev);
- st_press_deallocate_ring(indio_dev);
- }
+
+ st_press_deallocate_ring(indio_dev);
}
EXPORT_SYMBOL(st_press_common_remove);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: Fix buffers registrations in order to use generic IIO trigger
2013-09-18 9:00 Fix buffers registrations in order to use generic IIO trigger Denis CIOCCA
` (3 preceding siblings ...)
2013-09-18 9:00 ` [PATCH 4/4] iio:press: " Denis CIOCCA
@ 2013-09-18 11:20 ` Lee Jones
2013-09-18 11:32 ` Denis CIOCCA
4 siblings, 1 reply; 12+ messages in thread
From: Lee Jones @ 2013-09-18 11:20 UTC (permalink / raw)
To: Denis CIOCCA; +Cc: jic23, linux-iio
> This patches fix buffers registrations in order to use generic IIO trigger.
> Thanks,
I don't know Jonathan would like to deal with this, but please note
that all of these patches will conflict with my patch-set.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Fix buffers registrations in order to use generic IIO trigger
2013-09-18 11:20 ` Fix buffers registrations in order to use generic IIO trigger Lee Jones
@ 2013-09-18 11:32 ` Denis CIOCCA
0 siblings, 0 replies; 12+ messages in thread
From: Denis CIOCCA @ 2013-09-18 11:32 UTC (permalink / raw)
To: Lee Jones; +Cc: jic23@kernel.org, linux-iio@vger.kernel.org
Pj4gVGhpcyBwYXRjaGVzIGZpeCBidWZmZXJzIHJlZ2lzdHJhdGlvbnMgaW4gb3JkZXIgdG8gdXNl
IGdlbmVyaWMgSUlPIHRyaWdnZXIuDQo+PiBUaGFua3MsDQo+IEkgZG9uJ3Qga25vdyBKb25hdGhh
biB3b3VsZCBsaWtlIHRvIGRlYWwgd2l0aCB0aGlzLCBidXQgcGxlYXNlIG5vdGUNCj4gdGhhdCBh
bGwgb2YgdGhlc2UgcGF0Y2hlcyB3aWxsIGNvbmZsaWN0IHdpdGggbXkgcGF0Y2gtc2V0Lg0KPg0K
SSBjYW4gcmViYXNlIHRoZSBwYXRjaGVzIHdoZW4geW91ciB3aWxsIGJlIGFwcGxpZWQhDQpJIHNl
bnQgbm93IHRoZSBtYWlsIGZvciB5b3VyIGZlZWRiYWNrLi4uDQoNClRoYW5rcw==
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/4] iio:accel: Register buffer also without specific trigger
2013-09-18 9:00 ` [PATCH 1/4] iio:accel: Register buffer also without specific trigger Denis CIOCCA
@ 2013-09-21 14:43 ` Jonathan Cameron
0 siblings, 0 replies; 12+ messages in thread
From: Jonathan Cameron @ 2013-09-21 14:43 UTC (permalink / raw)
To: Denis CIOCCA; +Cc: linux-iio, lee.jones
On 09/18/13 10:00, Denis CIOCCA wrote:
> This patch fix buffer registration that allows to use generic IIO trigger.
>
> Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Applied to the togreg branch of iio.git with the tiny changes needed to make
this apply on top of Lee's patch set.
Please do take a quick look to check I didn't mess it up!
> ---
> drivers/iio/accel/st_accel_core.c | 19 +++++++++----------
> 1 file changed, 9 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
> index 1458343..1bbdc8f 100644
> --- a/drivers/iio/accel/st_accel_core.c
> +++ b/drivers/iio/accel/st_accel_core.c
> @@ -480,13 +480,13 @@ int st_accel_common_probe(struct iio_dev *indio_dev,
> if (err < 0)
> goto st_accel_common_probe_error;
>
> - if (adata->get_irq_data_ready(indio_dev) > 0) {
> - err = st_accel_allocate_ring(indio_dev);
> - if (err < 0)
> - goto st_accel_common_probe_error;
> + err = st_accel_allocate_ring(indio_dev);
> + if (err < 0)
> + goto st_accel_common_probe_error;
>
> + if (adata->get_irq_data_ready(indio_dev) > 0) {
> err = st_sensors_allocate_trigger(indio_dev,
> - ST_ACCEL_TRIGGER_OPS);
> + ST_ACCEL_TRIGGER_OPS);
> if (err < 0)
> goto st_accel_probe_trigger_error;
> }
> @@ -501,8 +501,7 @@ st_accel_device_register_error:
> if (adata->get_irq_data_ready(indio_dev) > 0)
> st_sensors_deallocate_trigger(indio_dev);
> st_accel_probe_trigger_error:
> - if (adata->get_irq_data_ready(indio_dev) > 0)
> - st_accel_deallocate_ring(indio_dev);
> + st_accel_deallocate_ring(indio_dev);
> st_accel_common_probe_error:
> return err;
> }
> @@ -513,10 +512,10 @@ void st_accel_common_remove(struct iio_dev *indio_dev)
> struct st_sensor_data *adata = iio_priv(indio_dev);
>
> iio_device_unregister(indio_dev);
> - if (adata->get_irq_data_ready(indio_dev) > 0) {
> + if (adata->get_irq_data_ready(indio_dev) > 0)
> st_sensors_deallocate_trigger(indio_dev);
> - st_accel_deallocate_ring(indio_dev);
> - }
> +
> + st_accel_deallocate_ring(indio_dev);
> }
> EXPORT_SYMBOL(st_accel_common_remove);
>
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/4] iio:gyro: Register buffer also without specific trigger
2013-09-18 9:00 ` [PATCH 2/4] iio:gyro: " Denis CIOCCA
@ 2013-09-21 14:50 ` Jonathan Cameron
0 siblings, 0 replies; 12+ messages in thread
From: Jonathan Cameron @ 2013-09-21 14:50 UTC (permalink / raw)
To: Denis CIOCCA; +Cc: linux-iio, lee.jones
On 09/18/13 10:00, Denis CIOCCA wrote:
> This patch fix buffer registration that allows to use generic IIO trigger.
>
> Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Forward ported and applied to the togreg branch of iio.git
> ---
> drivers/iio/gyro/st_gyro_core.c | 19 +++++++++----------
> 1 file changed, 9 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
> index e13c2b0..8a45d43 100644
> --- a/drivers/iio/gyro/st_gyro_core.c
> +++ b/drivers/iio/gyro/st_gyro_core.c
> @@ -329,13 +329,13 @@ int st_gyro_common_probe(struct iio_dev *indio_dev,
> if (err < 0)
> goto st_gyro_common_probe_error;
>
> - if (gdata->get_irq_data_ready(indio_dev) > 0) {
> - err = st_gyro_allocate_ring(indio_dev);
> - if (err < 0)
> - goto st_gyro_common_probe_error;
> + err = st_gyro_allocate_ring(indio_dev);
> + if (err < 0)
> + goto st_gyro_common_probe_error;
>
> + if (gdata->get_irq_data_ready(indio_dev) > 0) {
> err = st_sensors_allocate_trigger(indio_dev,
> - ST_GYRO_TRIGGER_OPS);
> + ST_GYRO_TRIGGER_OPS);
> if (err < 0)
> goto st_gyro_probe_trigger_error;
> }
> @@ -350,8 +350,7 @@ st_gyro_device_register_error:
> if (gdata->get_irq_data_ready(indio_dev) > 0)
> st_sensors_deallocate_trigger(indio_dev);
> st_gyro_probe_trigger_error:
> - if (gdata->get_irq_data_ready(indio_dev) > 0)
> - st_gyro_deallocate_ring(indio_dev);
> + st_gyro_deallocate_ring(indio_dev);
> st_gyro_common_probe_error:
> return err;
> }
> @@ -362,10 +361,10 @@ void st_gyro_common_remove(struct iio_dev *indio_dev)
> struct st_sensor_data *gdata = iio_priv(indio_dev);
>
> iio_device_unregister(indio_dev);
> - if (gdata->get_irq_data_ready(indio_dev) > 0) {
> + if (gdata->get_irq_data_ready(indio_dev) > 0)
> st_sensors_deallocate_trigger(indio_dev);
> - st_gyro_deallocate_ring(indio_dev);
> - }
> +
> + st_gyro_deallocate_ring(indio_dev);
> }
> EXPORT_SYMBOL(st_gyro_common_remove);
>
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 3/4] iio:magn: Register buffer also without specific trigger
2013-09-18 9:00 ` [PATCH 3/4] iio:magn: " Denis CIOCCA
@ 2013-09-21 14:50 ` Jonathan Cameron
0 siblings, 0 replies; 12+ messages in thread
From: Jonathan Cameron @ 2013-09-21 14:50 UTC (permalink / raw)
To: Denis CIOCCA; +Cc: linux-iio, lee.jones
On 09/18/13 10:00, Denis CIOCCA wrote:
> This patch fix buffer registration that allows to use generic IIO trigger.
>
> Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Forward ported and applied to the togreg branch of iio.git
Thanks,
Jonathan
> ---
> drivers/iio/magnetometer/st_magn_core.c | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
> index e8d2849..0de49f8 100644
> --- a/drivers/iio/magnetometer/st_magn_core.c
> +++ b/drivers/iio/magnetometer/st_magn_core.c
> @@ -372,10 +372,11 @@ int st_magn_common_probe(struct iio_dev *indio_dev,
> if (err < 0)
> goto st_magn_common_probe_error;
>
> + err = st_magn_allocate_ring(indio_dev);
> + if (err < 0)
> + goto st_magn_common_probe_error;
> +
> if (mdata->get_irq_data_ready(indio_dev) > 0) {
> - err = st_magn_allocate_ring(indio_dev);
> - if (err < 0)
> - goto st_magn_common_probe_error;
> err = st_sensors_allocate_trigger(indio_dev, NULL);
> if (err < 0)
> goto st_magn_probe_trigger_error;
> @@ -391,8 +392,7 @@ st_magn_device_register_error:
> if (mdata->get_irq_data_ready(indio_dev) > 0)
> st_sensors_deallocate_trigger(indio_dev);
> st_magn_probe_trigger_error:
> - if (mdata->get_irq_data_ready(indio_dev) > 0)
> - st_magn_deallocate_ring(indio_dev);
> + st_magn_deallocate_ring(indio_dev);
> st_magn_common_probe_error:
> return err;
> }
> @@ -403,10 +403,10 @@ void st_magn_common_remove(struct iio_dev *indio_dev)
> struct st_sensor_data *mdata = iio_priv(indio_dev);
>
> iio_device_unregister(indio_dev);
> - if (mdata->get_irq_data_ready(indio_dev) > 0) {
> + if (mdata->get_irq_data_ready(indio_dev) > 0)
> st_sensors_deallocate_trigger(indio_dev);
> - st_magn_deallocate_ring(indio_dev);
> - }
> +
> + st_magn_deallocate_ring(indio_dev);
> }
> EXPORT_SYMBOL(st_magn_common_remove);
>
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 4/4] iio:press: Register buffer also without specific trigger
2013-09-18 9:00 ` [PATCH 4/4] iio:press: " Denis CIOCCA
@ 2013-09-21 14:51 ` Jonathan Cameron
2013-09-23 10:53 ` Denis CIOCCA
0 siblings, 1 reply; 12+ messages in thread
From: Jonathan Cameron @ 2013-09-21 14:51 UTC (permalink / raw)
To: Denis CIOCCA; +Cc: linux-iio, lee.jones
On 09/18/13 10:00, Denis CIOCCA wrote:
> This patch fix buffer registration that allows to use generic IIO trigger.
>
> Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Forward ported and applied to the togreg branch of iio.git Thanks,
Please do confirm I didn't do anything silly, but the port to the code
Lee updated seemed trivial so I'd rather do it and clear the patches
out of my queue ;)
> ---
> drivers/iio/pressure/st_pressure_core.c | 17 ++++++++---------
> 1 file changed, 8 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
> index 93bff9b..312a093 100644
> --- a/drivers/iio/pressure/st_pressure_core.c
> +++ b/drivers/iio/pressure/st_pressure_core.c
> @@ -262,11 +262,11 @@ int st_press_common_probe(struct iio_dev *indio_dev,
> if (err < 0)
> goto st_press_common_probe_error;
>
> - if (pdata->get_irq_data_ready(indio_dev) > 0) {
> - err = st_press_allocate_ring(indio_dev);
> - if (err < 0)
> - goto st_press_common_probe_error;
> + err = st_press_allocate_ring(indio_dev);
> + if (err < 0)
> + goto st_press_common_probe_error;
>
> + if (pdata->get_irq_data_ready(indio_dev) > 0) {
> err = st_sensors_allocate_trigger(indio_dev,
> ST_PRESS_TRIGGER_OPS);
> if (err < 0)
> @@ -283,8 +283,7 @@ st_press_device_register_error:
> if (pdata->get_irq_data_ready(indio_dev) > 0)
> st_sensors_deallocate_trigger(indio_dev);
> st_press_probe_trigger_error:
> - if (pdata->get_irq_data_ready(indio_dev) > 0)
> - st_press_deallocate_ring(indio_dev);
> + st_press_deallocate_ring(indio_dev);
> st_press_common_probe_error:
> return err;
> }
> @@ -295,10 +294,10 @@ void st_press_common_remove(struct iio_dev *indio_dev)
> struct st_sensor_data *pdata = iio_priv(indio_dev);
>
> iio_device_unregister(indio_dev);
> - if (pdata->get_irq_data_ready(indio_dev) > 0) {
> + if (pdata->get_irq_data_ready(indio_dev) > 0)
> st_sensors_deallocate_trigger(indio_dev);
> - st_press_deallocate_ring(indio_dev);
> - }
> +
> + st_press_deallocate_ring(indio_dev);
> }
> EXPORT_SYMBOL(st_press_common_remove);
>
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 4/4] iio:press: Register buffer also without specific trigger
2013-09-21 14:51 ` Jonathan Cameron
@ 2013-09-23 10:53 ` Denis CIOCCA
0 siblings, 0 replies; 12+ messages in thread
From: Denis CIOCCA @ 2013-09-23 10:53 UTC (permalink / raw)
To: Jonathan Cameron; +Cc: linux-iio@vger.kernel.org, lee.jones@linaro.org
Thanks Jonathan!
all is fine...;)
Denis
> On 09/18/13 10:00, Denis CIOCCA wrote:
>> This patch fix buffer registration that allows to use generic IIO trigger.
>>
>> Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
> Forward ported and applied to the togreg branch of iio.git Thanks,
>
> Please do confirm I didn't do anything silly, but the port to the code
> Lee updated seemed trivial so I'd rather do it and clear the patches
> out of my queue ;)
>
>> ---
>> drivers/iio/pressure/st_pressure_core.c | 17 ++++++++---------
>> 1 file changed, 8 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
>> index 93bff9b..312a093 100644
>> --- a/drivers/iio/pressure/st_pressure_core.c
>> +++ b/drivers/iio/pressure/st_pressure_core.c
>> @@ -262,11 +262,11 @@ int st_press_common_probe(struct iio_dev *indio_dev,
>> if (err < 0)
>> goto st_press_common_probe_error;
>>
>> - if (pdata->get_irq_data_ready(indio_dev) > 0) {
>> - err = st_press_allocate_ring(indio_dev);
>> - if (err < 0)
>> - goto st_press_common_probe_error;
>> + err = st_press_allocate_ring(indio_dev);
>> + if (err < 0)
>> + goto st_press_common_probe_error;
>>
>> + if (pdata->get_irq_data_ready(indio_dev) > 0) {
>> err = st_sensors_allocate_trigger(indio_dev,
>> ST_PRESS_TRIGGER_OPS);
>> if (err < 0)
>> @@ -283,8 +283,7 @@ st_press_device_register_error:
>> if (pdata->get_irq_data_ready(indio_dev) > 0)
>> st_sensors_deallocate_trigger(indio_dev);
>> st_press_probe_trigger_error:
>> - if (pdata->get_irq_data_ready(indio_dev) > 0)
>> - st_press_deallocate_ring(indio_dev);
>> + st_press_deallocate_ring(indio_dev);
>> st_press_common_probe_error:
>> return err;
>> }
>> @@ -295,10 +294,10 @@ void st_press_common_remove(struct iio_dev *indio_dev)
>> struct st_sensor_data *pdata = iio_priv(indio_dev);
>>
>> iio_device_unregister(indio_dev);
>> - if (pdata->get_irq_data_ready(indio_dev) > 0) {
>> + if (pdata->get_irq_data_ready(indio_dev) > 0)
>> st_sensors_deallocate_trigger(indio_dev);
>> - st_press_deallocate_ring(indio_dev);
>> - }
>> +
>> + st_press_deallocate_ring(indio_dev);
>> }
>> EXPORT_SYMBOL(st_press_common_remove);
>>
>>
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2013-09-23 10:53 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-09-18 9:00 Fix buffers registrations in order to use generic IIO trigger Denis CIOCCA
2013-09-18 9:00 ` [PATCH 1/4] iio:accel: Register buffer also without specific trigger Denis CIOCCA
2013-09-21 14:43 ` Jonathan Cameron
2013-09-18 9:00 ` [PATCH 2/4] iio:gyro: " Denis CIOCCA
2013-09-21 14:50 ` Jonathan Cameron
2013-09-18 9:00 ` [PATCH 3/4] iio:magn: " Denis CIOCCA
2013-09-21 14:50 ` Jonathan Cameron
2013-09-18 9:00 ` [PATCH 4/4] iio:press: " Denis CIOCCA
2013-09-21 14:51 ` Jonathan Cameron
2013-09-23 10:53 ` Denis CIOCCA
2013-09-18 11:20 ` Fix buffers registrations in order to use generic IIO trigger Lee Jones
2013-09-18 11:32 ` Denis CIOCCA
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).