linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Peter Meerwald <pmeerw@pmeerw.net>, linux-iio@vger.kernel.org
Subject: Re: [PATCH v4 02/11] staging:iio:hmc5843: Rename _check_samp_freq to get_samp_freq_index
Date: Thu, 17 Oct 2013 23:47:46 +0100	[thread overview]
Message-ID: <52606912.7050109@kernel.org> (raw)
In-Reply-To: <1381961954-25596-3-git-send-email-pmeerw@pmeerw.net>

On 10/16/13 23:19, Peter Meerwald wrote:
> and drop/inline helper functions _check_int_plus_micros() and
> _show_int_plus_micros()
> 
> Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Applied to the togreg branch of iio.git

Technically this is addressing two different things so should really
have been two patches.


> ---
>  drivers/staging/iio/magnetometer/hmc5843.c | 47 ++++++++++--------------------
>  1 file changed, 16 insertions(+), 31 deletions(-)
> 
> diff --git a/drivers/staging/iio/magnetometer/hmc5843.c b/drivers/staging/iio/magnetometer/hmc5843.c
> index c56db41..749b0b6 100644
> --- a/drivers/staging/iio/magnetometer/hmc5843.c
> +++ b/drivers/staging/iio/magnetometer/hmc5843.c
> @@ -309,15 +309,17 @@ static IIO_DEVICE_ATTR(meas_conf,
>  			hmc5843_set_measurement_configuration,
>  			0);
>  
> -static ssize_t hmc5843_show_int_plus_micros(char *buf,
> -	const int (*vals)[2], int n)
> +static ssize_t hmc5843_show_samp_freq_avail(struct device *dev,
> +				struct device_attribute *attr, char *buf)
>  {
> +	struct hmc5843_data *data = iio_priv(dev_to_iio_dev(dev));
>  	size_t len = 0;
>  	int i;
>  
> -	for (i = 0; i < n; i++)
> +	for (i = 0; i < HMC5843_RATE_NOT_USED; i++)
>  		len += scnprintf(buf + len, PAGE_SIZE - len,
> -			"%d.%d ", vals[i][0], vals[i][1]);
> +			"%d.%d ", data->variant->regval_to_samp_freq[i][0],
> +			data->variant->regval_to_samp_freq[i][1]);
>  
>  	/* replace trailing space by newline */
>  	buf[len - 1] = '\n';
> @@ -325,28 +327,6 @@ static ssize_t hmc5843_show_int_plus_micros(char *buf,
>  	return len;
>  }
>  
> -static int hmc5843_check_int_plus_micros(const int (*vals)[2], int n,
> -					int val, int val2)
> -{
> -	int i;
> -
> -	for (i = 0; i < n; i++) {
> -		if (val == vals[i][0] && val2 == vals[i][1])
> -			return i;
> -	}
> -
> -	return -EINVAL;
> -}
> -
> -static ssize_t hmc5843_show_samp_freq_avail(struct device *dev,
> -				struct device_attribute *attr, char *buf)
> -{
> -	struct hmc5843_data *data = iio_priv(dev_to_iio_dev(dev));
> -
> -	return hmc5843_show_int_plus_micros(buf,
> -		data->variant->regval_to_samp_freq, HMC5843_RATE_NOT_USED);
> -}
> -
>  static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(hmc5843_show_samp_freq_avail);
>  
>  static s32 hmc5843_set_rate(struct hmc5843_data *data, u8 rate)
> @@ -357,12 +337,17 @@ static s32 hmc5843_set_rate(struct hmc5843_data *data, u8 rate)
>  		reg_val);
>  }
>  
> -static int hmc5843_check_samp_freq(struct hmc5843_data *data,
> +static int hmc5843_get_samp_freq_index(struct hmc5843_data *data,
>  				   int val, int val2)
>  {
> -	return hmc5843_check_int_plus_micros(
> -		data->variant->regval_to_samp_freq, HMC5843_RATE_NOT_USED,
> -		val, val2);
> +	int i;
> +
> +	for (i = 0; i < HMC5843_RATE_NOT_USED; i++)
> +		if (val == data->variant->regval_to_samp_freq[i][0] &&
> +			val2 == data->variant->regval_to_samp_freq[i][1])
> +			return i;
> +
> +	return -EINVAL;
>  }
>  
>  static ssize_t hmc5843_show_scale_avail(struct device *dev,
> @@ -430,7 +415,7 @@ static int hmc5843_write_raw(struct iio_dev *indio_dev,
>  
>  	switch (mask) {
>  	case IIO_CHAN_INFO_SAMP_FREQ:
> -		rate = hmc5843_check_samp_freq(data, val, val2);
> +		rate = hmc5843_get_samp_freq_index(data, val, val2);
>  		if (rate < 0)
>  			return -EINVAL;
>  
> 

  reply	other threads:[~2013-10-17 21:47 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-16 22:19 [PATCH v4 00/11] hmc5843 cleanup Peter Meerwald
2013-10-16 22:19 ` [PATCH v4 01/11] staging:iio:hmc5843: Use SCALE instead of magn_range Peter Meerwald
2013-10-17 22:46   ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 02/11] staging:iio:hmc5843: Rename _check_samp_freq to get_samp_freq_index Peter Meerwald
2013-10-17 22:47   ` Jonathan Cameron [this message]
2013-10-16 22:19 ` [PATCH v4 03/11] staging:iio:hmc5843: Always read all channels values otherwise no updates Peter Meerwald
2013-10-17 22:49   ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 04/11] staging:iio:hmc5843: Add trigger handling Peter Meerwald
2013-10-17 22:49   ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 05/11] staging:iio:hmc5843: Remove ability to change operating mode Peter Meerwald
2013-10-17 22:50   ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 06/11] staging:iio:hmc5843: Rename _configure() to _set_mode() Peter Meerwald
2013-10-17 22:50   ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 07/11] staging:iio:hmc5843: Reorganize _set_meas_conf() Peter Meerwald
2013-10-17 22:51   ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 08/11] staging:iio:hmc5843: Rename _set_rate() to _set_samp_freq() Peter Meerwald
2013-10-17 22:52   ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 09/11] staging:iio:hmc5843: Introduce _set_range_gain() Peter Meerwald
2013-10-17 22:52   ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 10/11] staging:iio:hmc5843: Check initialization and chip identifier Peter Meerwald
2013-10-17 22:52   ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 11/11] staging:iio:hmc5843: Trivial cleanup Peter Meerwald
2013-10-17 22:53   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=52606912.7050109@kernel.org \
    --to=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=pmeerw@pmeerw.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).