From: Jonathan Cameron <jic23@kernel.org>
To: Peter Meerwald <pmeerw@pmeerw.net>, linux-iio@vger.kernel.org
Subject: Re: [PATCH v4 03/11] staging:iio:hmc5843: Always read all channels values otherwise no updates
Date: Thu, 17 Oct 2013 23:49:15 +0100 [thread overview]
Message-ID: <5260696B.1050509@kernel.org> (raw)
In-Reply-To: <1381961954-25596-4-git-send-email-pmeerw@pmeerw.net>
On 10/16/13 23:19, Peter Meerwald wrote:
> v2:
> * use __be16 instead of s16
>
> Split out data ready/wait for read measurement
> fix bug in case reading status register fails
>
> Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Applied to the togreg branch of iio.git
Thanks,
> ---
> drivers/staging/iio/magnetometer/hmc5843.c | 53 ++++++++++++++++++------------
> 1 file changed, 32 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/staging/iio/magnetometer/hmc5843.c b/drivers/staging/iio/magnetometer/hmc5843.c
> index 749b0b6..78b97b0 100644
> --- a/drivers/staging/iio/magnetometer/hmc5843.c
> +++ b/drivers/staging/iio/magnetometer/hmc5843.c
> @@ -28,12 +28,7 @@
> #define HMC5843_CONFIG_REG_A 0x00
> #define HMC5843_CONFIG_REG_B 0x01
> #define HMC5843_MODE_REG 0x02
> -#define HMC5843_DATA_OUT_X_MSB_REG 0x03
> -#define HMC5843_DATA_OUT_Y_MSB_REG 0x05
> -#define HMC5843_DATA_OUT_Z_MSB_REG 0x07
> -/* Beware: Y and Z are exchanged on HMC5883 */
> -#define HMC5883_DATA_OUT_Z_MSB_REG 0x05
> -#define HMC5883_DATA_OUT_Y_MSB_REG 0x07
> +#define HMC5843_DATA_OUT_MSB_REGS 0x03
> #define HMC5843_STATUS_REG 0x09
>
> enum hmc5843_ids {
> @@ -140,17 +135,16 @@ static s32 hmc5843_configure(struct i2c_client *client,
> operating_mode & HMC5843_MODE_MASK);
> }
>
> -/* Return the measurement value from the specified channel */
> -static int hmc5843_read_measurement(struct hmc5843_data *data,
> - int address, int *val)
> +static int hmc5843_wait_measurement(struct hmc5843_data *data)
> {
> s32 result;
> int tries = 150;
>
> - mutex_lock(&data->lock);
> while (tries-- > 0) {
> result = i2c_smbus_read_byte_data(data->client,
> HMC5843_STATUS_REG);
> + if (result < 0)
> + return result;
> if (result & HMC5843_DATA_READY)
> break;
> msleep(20);
> @@ -158,16 +152,32 @@ static int hmc5843_read_measurement(struct hmc5843_data *data,
>
> if (tries < 0) {
> dev_err(&data->client->dev, "data not ready\n");
> - mutex_unlock(&data->lock);
> return -EIO;
> }
>
> - result = i2c_smbus_read_word_swapped(data->client, address);
> + return 0;
> +}
> +
> +/* Return the measurement value from the specified channel */
> +static int hmc5843_read_measurement(struct hmc5843_data *data,
> + int idx, int *val)
> +{
> + s32 result;
> + __be16 values[3];
> +
> + mutex_lock(&data->lock);
> + result = hmc5843_wait_measurement(data);
> + if (result < 0) {
> + mutex_unlock(&data->lock);
> + return result;
> + }
> + result = i2c_smbus_read_i2c_block_data(data->client,
> + HMC5843_DATA_OUT_MSB_REGS, sizeof(values), (u8 *) values);
> mutex_unlock(&data->lock);
> if (result < 0)
> return -EINVAL;
>
> - *val = sign_extend32(result, 15);
> + *val = sign_extend32(be16_to_cpu(values[idx]), 15);
> return IIO_VAL_INT;
> }
>
> @@ -458,7 +468,7 @@ static int hmc5843_write_raw_get_fmt(struct iio_dev *indio_dev,
> }
> }
>
> -#define HMC5843_CHANNEL(axis, addr) \
> +#define HMC5843_CHANNEL(axis, idx) \
> { \
> .type = IIO_MAGN, \
> .modified = 1, \
> @@ -466,19 +476,20 @@ static int hmc5843_write_raw_get_fmt(struct iio_dev *indio_dev,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
> BIT(IIO_CHAN_INFO_SAMP_FREQ), \
> - .address = addr \
> + .address = idx \
> }
>
> static const struct iio_chan_spec hmc5843_channels[] = {
> - HMC5843_CHANNEL(X, HMC5843_DATA_OUT_X_MSB_REG),
> - HMC5843_CHANNEL(Y, HMC5843_DATA_OUT_Y_MSB_REG),
> - HMC5843_CHANNEL(Z, HMC5843_DATA_OUT_Z_MSB_REG),
> + HMC5843_CHANNEL(X, 0),
> + HMC5843_CHANNEL(Y, 1),
> + HMC5843_CHANNEL(Z, 2),
> };
>
> +/* Beware: Y and Z are exchanged on HMC5883 */
> static const struct iio_chan_spec hmc5883_channels[] = {
> - HMC5843_CHANNEL(X, HMC5843_DATA_OUT_X_MSB_REG),
> - HMC5843_CHANNEL(Y, HMC5883_DATA_OUT_Y_MSB_REG),
> - HMC5843_CHANNEL(Z, HMC5883_DATA_OUT_Z_MSB_REG),
> + HMC5843_CHANNEL(X, 0),
> + HMC5843_CHANNEL(Z, 1),
> + HMC5843_CHANNEL(Y, 2),
> };
>
> static struct attribute *hmc5843_attributes[] = {
>
next prev parent reply other threads:[~2013-10-17 21:48 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-16 22:19 [PATCH v4 00/11] hmc5843 cleanup Peter Meerwald
2013-10-16 22:19 ` [PATCH v4 01/11] staging:iio:hmc5843: Use SCALE instead of magn_range Peter Meerwald
2013-10-17 22:46 ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 02/11] staging:iio:hmc5843: Rename _check_samp_freq to get_samp_freq_index Peter Meerwald
2013-10-17 22:47 ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 03/11] staging:iio:hmc5843: Always read all channels values otherwise no updates Peter Meerwald
2013-10-17 22:49 ` Jonathan Cameron [this message]
2013-10-16 22:19 ` [PATCH v4 04/11] staging:iio:hmc5843: Add trigger handling Peter Meerwald
2013-10-17 22:49 ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 05/11] staging:iio:hmc5843: Remove ability to change operating mode Peter Meerwald
2013-10-17 22:50 ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 06/11] staging:iio:hmc5843: Rename _configure() to _set_mode() Peter Meerwald
2013-10-17 22:50 ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 07/11] staging:iio:hmc5843: Reorganize _set_meas_conf() Peter Meerwald
2013-10-17 22:51 ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 08/11] staging:iio:hmc5843: Rename _set_rate() to _set_samp_freq() Peter Meerwald
2013-10-17 22:52 ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 09/11] staging:iio:hmc5843: Introduce _set_range_gain() Peter Meerwald
2013-10-17 22:52 ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 10/11] staging:iio:hmc5843: Check initialization and chip identifier Peter Meerwald
2013-10-17 22:52 ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 11/11] staging:iio:hmc5843: Trivial cleanup Peter Meerwald
2013-10-17 22:53 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5260696B.1050509@kernel.org \
--to=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).