From: Jonathan Cameron <jic23@kernel.org>
To: Peter Meerwald <pmeerw@pmeerw.net>, linux-iio@vger.kernel.org
Subject: Re: [PATCH v4 08/11] staging:iio:hmc5843: Rename _set_rate() to _set_samp_freq()
Date: Thu, 17 Oct 2013 23:52:05 +0100 [thread overview]
Message-ID: <52606A15.9060707@kernel.org> (raw)
In-Reply-To: <1381961954-25596-9-git-send-email-pmeerw@pmeerw.net>
On 10/16/13 23:19, Peter Meerwald wrote:
> move locking inside _set() function
>
> Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Applied to the togreg branch of iio.git
Thanks
> ---
> drivers/staging/iio/magnetometer/hmc5843.c | 31 +++++++++++++++---------------
> 1 file changed, 15 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/staging/iio/magnetometer/hmc5843.c b/drivers/staging/iio/magnetometer/hmc5843.c
> index bd13984..a91d302 100644
> --- a/drivers/staging/iio/magnetometer/hmc5843.c
> +++ b/drivers/staging/iio/magnetometer/hmc5843.c
> @@ -66,8 +66,7 @@ enum hmc5843_ids {
> */
> #define HMC5843_RATE_OFFSET 0x02
> #define HMC5843_RATE_DEFAULT 0x04
> -#define HMC5843_RATE_BITMASK 0x1C
> -#define HMC5843_RATE_NOT_USED 0x07
> +#define HMC5843_RATES 7
>
> /* Device measurement configuration */
> #define HMC5843_MEAS_CONF_NORMAL 0x00
> @@ -264,7 +263,7 @@ static ssize_t hmc5843_show_samp_freq_avail(struct device *dev,
> size_t len = 0;
> int i;
>
> - for (i = 0; i < HMC5843_RATE_NOT_USED; i++)
> + for (i = 0; i < HMC5843_RATES; i++)
> len += scnprintf(buf + len, PAGE_SIZE - len,
> "%d.%d ", data->variant->regval_to_samp_freq[i][0],
> data->variant->regval_to_samp_freq[i][1]);
> @@ -277,12 +276,18 @@ static ssize_t hmc5843_show_samp_freq_avail(struct device *dev,
>
> static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(hmc5843_show_samp_freq_avail);
>
> -static s32 hmc5843_set_rate(struct hmc5843_data *data, u8 rate)
> +static int hmc5843_set_samp_freq(struct hmc5843_data *data, u8 rate)
> {
> - u8 reg_val = data->meas_conf | (rate << HMC5843_RATE_OFFSET);
> + int ret;
> +
> + mutex_lock(&data->lock);
> + ret = i2c_smbus_write_byte_data(data->client, HMC5843_CONFIG_REG_A,
> + data->meas_conf | (rate << HMC5843_RATE_OFFSET));
> + if (ret >= 0)
> + data->rate = rate;
> + mutex_unlock(&data->lock);
>
> - return i2c_smbus_write_byte_data(data->client, HMC5843_CONFIG_REG_A,
> - reg_val);
> + return ret;
> }
>
> static int hmc5843_get_samp_freq_index(struct hmc5843_data *data,
> @@ -290,7 +295,7 @@ static int hmc5843_get_samp_freq_index(struct hmc5843_data *data,
> {
> int i;
>
> - for (i = 0; i < HMC5843_RATE_NOT_USED; i++)
> + for (i = 0; i < HMC5843_RATES; i++)
> if (val == data->variant->regval_to_samp_freq[i][0] &&
> val2 == data->variant->regval_to_samp_freq[i][1])
> return i;
> @@ -367,13 +372,7 @@ static int hmc5843_write_raw(struct iio_dev *indio_dev,
> if (rate < 0)
> return -EINVAL;
>
> - mutex_lock(&data->lock);
> - ret = hmc5843_set_rate(data, rate);
> - if (ret >= 0)
> - data->rate = rate;
> - mutex_unlock(&data->lock);
> -
> - return ret;
> + return hmc5843_set_samp_freq(data, rate);
> case IIO_CHAN_INFO_SCALE:
> range = hmc5843_get_scale_index(data, val, val2);
> if (range < 0)
> @@ -495,7 +494,7 @@ static const struct hmc5843_chip_info hmc5843_chip_info_tbl[] = {
> static void hmc5843_init(struct hmc5843_data *data)
> {
> hmc5843_set_meas_conf(data, HMC5843_MEAS_CONF_NORMAL);
> - hmc5843_set_rate(data, HMC5843_RATE_DEFAULT);
> + hmc5843_set_samp_freq(data, HMC5843_RATE_DEFAULT);
> hmc5843_set_mode(data, HMC5843_MODE_CONVERSION_CONTINUOUS);
> i2c_smbus_write_byte_data(data->client, HMC5843_CONFIG_REG_B,
> HMC5843_RANGE_GAIN_DEFAULT);
>
next prev parent reply other threads:[~2013-10-17 21:51 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-16 22:19 [PATCH v4 00/11] hmc5843 cleanup Peter Meerwald
2013-10-16 22:19 ` [PATCH v4 01/11] staging:iio:hmc5843: Use SCALE instead of magn_range Peter Meerwald
2013-10-17 22:46 ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 02/11] staging:iio:hmc5843: Rename _check_samp_freq to get_samp_freq_index Peter Meerwald
2013-10-17 22:47 ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 03/11] staging:iio:hmc5843: Always read all channels values otherwise no updates Peter Meerwald
2013-10-17 22:49 ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 04/11] staging:iio:hmc5843: Add trigger handling Peter Meerwald
2013-10-17 22:49 ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 05/11] staging:iio:hmc5843: Remove ability to change operating mode Peter Meerwald
2013-10-17 22:50 ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 06/11] staging:iio:hmc5843: Rename _configure() to _set_mode() Peter Meerwald
2013-10-17 22:50 ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 07/11] staging:iio:hmc5843: Reorganize _set_meas_conf() Peter Meerwald
2013-10-17 22:51 ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 08/11] staging:iio:hmc5843: Rename _set_rate() to _set_samp_freq() Peter Meerwald
2013-10-17 22:52 ` Jonathan Cameron [this message]
2013-10-16 22:19 ` [PATCH v4 09/11] staging:iio:hmc5843: Introduce _set_range_gain() Peter Meerwald
2013-10-17 22:52 ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 10/11] staging:iio:hmc5843: Check initialization and chip identifier Peter Meerwald
2013-10-17 22:52 ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 11/11] staging:iio:hmc5843: Trivial cleanup Peter Meerwald
2013-10-17 22:53 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52606A15.9060707@kernel.org \
--to=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).