From: Jonathan Cameron <jic23@kernel.org>
To: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: lars@metafoo.de, Marek Vasut <marex@denx.de>,
harald@ccbib.org, hector.palacios@digi.com,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCHv4 3/3] iio: mxs-lradc: add write_raw function to modify scale
Date: Sun, 08 Dec 2013 13:35:18 +0000 [thread overview]
Message-ID: <52A47596.10406@kernel.org> (raw)
In-Reply-To: <1386375840-24984-4-git-send-email-alexandre.belloni@free-electrons.com>
On 12/07/13 00:24, Alexandre Belloni wrote:
> From: Hector Palacios <hector.palacios@digi.com>
>
> Added write_raw function to manipulate the optional divider_by_two
> through the scaling attribute out of the available scales.
>
> Signed-off-by: Hector Palacios <hector.palacios@digi.com>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Looks good to me - make that little tiny tweak I mentioned in the previous
patch and I'll be happy to take these.
Thanks,
Jonathan
> ---
> drivers/staging/iio/adc/mxs-lradc.c | 56 ++++++++++++++++++++++++++++++++++++-
> 1 file changed, 55 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c
> index eca766dce644..a58c6aaa94d3 100644
> --- a/drivers/staging/iio/adc/mxs-lradc.c
> +++ b/drivers/staging/iio/adc/mxs-lradc.c
> @@ -301,6 +301,7 @@ struct mxs_lradc {
> #define LRADC_CTRL1_LRADC_IRQ_OFFSET 0
>
> #define LRADC_CTRL2 0x20
> +#define LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET 24
> #define LRADC_CTRL2_TEMPSENSE_PWD (1 << 15)
>
> #define LRADC_STATUS 0x40
> @@ -918,7 +919,8 @@ static int mxs_lradc_read_raw(struct iio_dev *iio_dev,
> }
>
> *val = lradc->vref_mv[chan->channel];
> - *val2 = chan->scan_type.realbits;
> + *val2 = chan->scan_type.realbits -
> + lradc->is_divided[chan->channel];
> return IIO_VAL_FRACTIONAL_LOG2;
>
> case IIO_CHAN_INFO_OFFSET:
> @@ -942,6 +944,56 @@ static int mxs_lradc_read_raw(struct iio_dev *iio_dev,
> return -EINVAL;
> }
>
> +static int mxs_lradc_write_raw(struct iio_dev *iio_dev,
> + const struct iio_chan_spec *chan,
> + int val, int val2, long m)
> +{
> + struct mxs_lradc *lradc = iio_priv(iio_dev);
> + struct mxs_lradc_scale *scale_avail =
> + lradc->scale_avail[chan->channel];
> + int ret;
> +
> + ret = mutex_trylock(&lradc->lock);
> + if (!ret)
> + return -EBUSY;
> +
> + switch (m) {
> + case IIO_CHAN_INFO_SCALE:
> + ret = -EINVAL;
> + if (val == scale_avail[MXS_LRADC_DIV_DISABLED].integer &&
> + val2 == scale_avail[MXS_LRADC_DIV_DISABLED].nano) {
> + /* divider by two disabled */
> + writel(1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET,
> + lradc->base + LRADC_CTRL2 + STMP_OFFSET_REG_CLR);
> + lradc->is_divided[chan->channel] = 0;
> + ret = 0;
> + } else if (val == scale_avail[MXS_LRADC_DIV_ENABLED].integer &&
> + val2 == scale_avail[MXS_LRADC_DIV_ENABLED].nano) {
> + /* divider by two enabled */
> + writel(1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET,
> + lradc->base + LRADC_CTRL2 + STMP_OFFSET_REG_SET);
> + lradc->is_divided[chan->channel] = 1;
> + ret = 0;
> + }
> +
> + break;
> + default:
> + ret = -EINVAL;
> + break;
> + }
> +
> + mutex_unlock(&lradc->lock);
> +
> + return ret;
> +}
> +
> +static int mxs_lradc_write_raw_get_fmt(struct iio_dev *iio_dev,
> + const struct iio_chan_spec *chan,
> + long m)
> +{
> + return IIO_VAL_INT_PLUS_NANO;
> +}
> +
> static ssize_t mxs_lradc_show_scale_available_ch(struct device *dev,
> struct device_attribute *attr,
> char *buf,
> @@ -1019,6 +1071,8 @@ static const struct attribute_group mxs_lradc_attribute_group = {
> static const struct iio_info mxs_lradc_iio_info = {
> .driver_module = THIS_MODULE,
> .read_raw = mxs_lradc_read_raw,
> + .write_raw = mxs_lradc_write_raw,
> + .write_raw_get_fmt = mxs_lradc_write_raw_get_fmt,
> .attrs = &mxs_lradc_attribute_group,
> };
>
>
next prev parent reply other threads:[~2013-12-08 13:35 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-07 0:23 [PATCHv4 0/3] iio: mxs-lradc: add support to optional divider_by_two Alexandre Belloni
2013-12-07 0:23 ` [PATCHv4 1/3] iio: mxs-lradc: add scale attribute to channels Alexandre Belloni
2013-12-07 0:23 ` [PATCHv4 2/3] iio: mxs-lradc: add scale_available file " Alexandre Belloni
2013-12-08 13:33 ` Jonathan Cameron
2013-12-07 0:24 ` [PATCHv4 3/3] iio: mxs-lradc: add write_raw function to modify scale Alexandre Belloni
2013-12-08 13:35 ` Jonathan Cameron [this message]
2013-12-09 0:18 ` [PATCHv4 0/3] iio: mxs-lradc: add support to optional divider_by_two Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52A47596.10406@kernel.org \
--to=jic23@kernel.org \
--cc=alexandre.belloni@free-electrons.com \
--cc=harald@ccbib.org \
--cc=hector.palacios@digi.com \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marex@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).