linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: lars@metafoo.de, Marek Vasut <marex@denx.de>,
	harald@ccbib.org, hector.palacios@digi.com,
	linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCHv5 RESEND 1/4] iio: mxs-lradc: add scale attribute to channels
Date: Wed, 01 Jan 2014 14:25:04 +0000	[thread overview]
Message-ID: <52C42540.7080103@kernel.org> (raw)
In-Reply-To: <1387820884-28140-2-git-send-email-alexandre.belloni@free-electrons.com>



On 23/12/13 17:48, Alexandre Belloni wrote:
> From: Hector Palacios <hector.palacios@digi.com>
>
> Some LRADC channels have fixed pre-dividers and all have an optional
> divider by two which allows a maximum input voltage of VDDIO - 50mV.
>
> This patch
>   - adds the scaling info flag to all channels
>   - grabs the max reference voltage per channel
>     (where the fixed pre-dividers apply)
>   - allows to read the scaling attribute (computed from the Vref)
>
> Signed-off-by: Hector Palacios <hector.palacios@digi.com>.
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> Acked-by: Marek Vasut <marex@denx.de>
Applied to the togreg branch of iio.git - initially pushed out as 
testing for the autobuilders to do their magic.

Jonathan
>
> ---
>   drivers/staging/iio/adc/mxs-lradc.c | 56 +++++++++++++++++++++++++++++++++++--
>   1 file changed, 54 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c
> index 5a4499c3d22a..22fef0a408db 100644
> --- a/drivers/staging/iio/adc/mxs-lradc.c
> +++ b/drivers/staging/iio/adc/mxs-lradc.c
> @@ -111,16 +111,59 @@ static const char * const mx28_lradc_irq_names[] = {
>   struct mxs_lradc_of_config {
>   	const int		irq_count;
>   	const char * const	*irq_name;
> +	const uint32_t		*vref_mv;
> +};
> +
> +#define VREF_MV_BASE 1850
> +
> +static const uint32_t mx23_vref_mv[LRADC_MAX_TOTAL_CHANS] = {
> +	VREF_MV_BASE,		/* CH0 */
> +	VREF_MV_BASE,		/* CH1 */
> +	VREF_MV_BASE,		/* CH2 */
> +	VREF_MV_BASE,		/* CH3 */
> +	VREF_MV_BASE,		/* CH4 */
> +	VREF_MV_BASE,		/* CH5 */
> +	VREF_MV_BASE * 2,	/* CH6 VDDIO */
> +	VREF_MV_BASE * 4,	/* CH7 VBATT */
> +	VREF_MV_BASE,		/* CH8 Temp sense 0 */
> +	VREF_MV_BASE,		/* CH9 Temp sense 1 */
> +	VREF_MV_BASE,		/* CH10 */
> +	VREF_MV_BASE,		/* CH11 */
> +	VREF_MV_BASE,		/* CH12 USB_DP */
> +	VREF_MV_BASE,		/* CH13 USB_DN */
> +	VREF_MV_BASE,		/* CH14 VBG */
> +	VREF_MV_BASE * 4,	/* CH15 VDD5V */
> +};
> +
> +static const uint32_t mx28_vref_mv[LRADC_MAX_TOTAL_CHANS] = {
> +	VREF_MV_BASE,		/* CH0 */
> +	VREF_MV_BASE,		/* CH1 */
> +	VREF_MV_BASE,		/* CH2 */
> +	VREF_MV_BASE,		/* CH3 */
> +	VREF_MV_BASE,		/* CH4 */
> +	VREF_MV_BASE,		/* CH5 */
> +	VREF_MV_BASE,		/* CH6 */
> +	VREF_MV_BASE * 4,	/* CH7 VBATT */
> +	VREF_MV_BASE,		/* CH8 Temp sense 0 */
> +	VREF_MV_BASE,		/* CH9 Temp sense 1 */
> +	VREF_MV_BASE * 2,	/* CH10 VDDIO */
> +	VREF_MV_BASE,		/* CH11 VTH */
> +	VREF_MV_BASE * 2,	/* CH12 VDDA */
> +	VREF_MV_BASE,		/* CH13 VDDD */
> +	VREF_MV_BASE,		/* CH14 VBG */
> +	VREF_MV_BASE * 4,	/* CH15 VDD5V */
>   };
>
>   static const struct mxs_lradc_of_config mxs_lradc_of_config[] = {
>   	[IMX23_LRADC] = {
>   		.irq_count	= ARRAY_SIZE(mx23_lradc_irq_names),
>   		.irq_name	= mx23_lradc_irq_names,
> +		.vref_mv	= mx23_vref_mv,
>   	},
>   	[IMX28_LRADC] = {
>   		.irq_count	= ARRAY_SIZE(mx28_lradc_irq_names),
>   		.irq_name	= mx28_lradc_irq_names,
> +		.vref_mv	= mx28_vref_mv,
>   	},
>   };
>
> @@ -155,6 +198,8 @@ struct mxs_lradc {
>
>   	struct completion	completion;
>
> +	const uint32_t		*vref_mv;
> +
>   	/*
>   	 * Touchscreen LRADC channels receives a private slot in the CTRL4
>   	 * register, the slot #7. Therefore only 7 slots instead of 8 in the
> @@ -836,6 +881,8 @@ static int mxs_lradc_read_raw(struct iio_dev *iio_dev,
>   			const struct iio_chan_spec *chan,
>   			int *val, int *val2, long m)
>   {
> +	struct mxs_lradc *lradc = iio_priv(iio_dev);
> +
>   	/* Check for invalid channel */
>   	if (chan->channel > LRADC_MAX_TOTAL_CHANS)
>   		return -EINVAL;
> @@ -857,7 +904,9 @@ static int mxs_lradc_read_raw(struct iio_dev *iio_dev,
>   			return IIO_VAL_INT_PLUS_MICRO;
>   		}
>
> -		return -EINVAL;
> +		*val = lradc->vref_mv[chan->channel];
> +		*val2 = chan->scan_type.realbits;
> +		return IIO_VAL_FRACTIONAL_LOG2;
>
>   	case IIO_CHAN_INFO_OFFSET:
>   		if (chan->type == IIO_TEMP) {
> @@ -1189,7 +1238,8 @@ static const struct iio_buffer_setup_ops mxs_lradc_buffer_ops = {
>   	.type = (chan_type),					\
>   	.indexed = 1,						\
>   	.scan_index = (idx),					\
> -	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
> +	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |		\
> +			      BIT(IIO_CHAN_INFO_SCALE),		\
>   	.channel = (idx),					\
>   	.scan_type = {						\
>   		.sign = 'u',					\
> @@ -1381,6 +1431,8 @@ static int mxs_lradc_probe(struct platform_device *pdev)
>   			return ret;
>   	}
>
> +	lradc->vref_mv = of_cfg->vref_mv;
> +
>   	platform_set_drvdata(pdev, iio);
>
>   	init_completion(&lradc->completion);
>

  reply	other threads:[~2014-01-01 14:25 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-12-23 17:48 [PATCHv5 RESEND 0/4] iio: mxs-lradc: add support to optional divider_by_two Alexandre Belloni
2013-12-23 17:48 ` [PATCHv5 RESEND 1/4] iio: mxs-lradc: add scale attribute to channels Alexandre Belloni
2014-01-01 14:25   ` Jonathan Cameron [this message]
2013-12-23 17:48 ` [PATCHv5 RESEND 2/4] iio: mxs-lradc: add scale_available file " Alexandre Belloni
2014-01-01 14:28   ` Jonathan Cameron
2013-12-23 17:48 ` [PATCHv5 RESEND 3/4] iio: mxs-lradc: add write_raw function to modify scale Alexandre Belloni
2014-01-01 14:29   ` Jonathan Cameron
2013-12-23 17:48 ` [PATCHv5 RESEND 4/4] iio: mxs-lradc: convert is_divided to a bitmap Alexandre Belloni
2014-01-01 14:31   ` Jonathan Cameron
2014-01-01 19:31     ` Marek Vasut
2014-01-02  8:38       ` Alexandre Belloni
2014-01-02  9:40         ` Jonathan Cameron
2013-12-23 18:54 ` [PATCHv5 RESEND 0/4] iio: mxs-lradc: add support to optional divider_by_two Marek Vasut
2013-12-23 19:22   ` Alexandre Belloni
2013-12-24  1:50     ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=52C42540.7080103@kernel.org \
    --to=jic23@kernel.org \
    --cc=alexandre.belloni@free-electrons.com \
    --cc=harald@ccbib.org \
    --cc=hector.palacios@digi.com \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marex@denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).