From: Jonathan Cameron <jic23@kernel.org>
To: Linus Walleij <linus.walleij@linaro.org>, linux-iio@vger.kernel.org
Subject: Re: [PATCH 06/15 v2] iio: accel: kxsd9: Convert to use regmap for transport
Date: Sun, 18 Sep 2016 11:28:50 +0100 [thread overview]
Message-ID: <532fd859-b013-4e17-e20e-c134beebb54f@kernel.org> (raw)
In-Reply-To: <1472723089-25113-6-git-send-email-linus.walleij@linaro.org>
On 01/09/16 10:44, Linus Walleij wrote:
> This converts the KXSD9 driver to drop the custom transport
> mechanism and just use regmap like everything else.
>
> Tested-by: Jonathan Cameron <jic23@kernel.org>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Applied to the togreg branch of iio.git. Initially pushed out as testing
for the autbuilders to play with it.
Thanks,
Jonathan
> ---
> ChangeLog v1->v2:
> - Rebase on the rest of the series.
> ---
> drivers/iio/accel/Kconfig | 1 +
> drivers/iio/accel/kxsd9-spi.c | 79 ++++++++++---------------------------------
> drivers/iio/accel/kxsd9.c | 40 +++++++++++++---------
> drivers/iio/accel/kxsd9.h | 22 +-----------
> 4 files changed, 43 insertions(+), 99 deletions(-)
>
> diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
> index 95e3fc09f640..0ac316fbba38 100644
> --- a/drivers/iio/accel/Kconfig
> +++ b/drivers/iio/accel/Kconfig
> @@ -108,6 +108,7 @@ config KXSD9_SPI
> depends on KXSD9
> depends on SPI
> default KXSD9
> + select REGMAP_SPI
> help
> Say yes here to enable the Kionix KXSD9 accelerometer
> SPI transport channel.
> diff --git a/drivers/iio/accel/kxsd9-spi.c b/drivers/iio/accel/kxsd9-spi.c
> index a49c10cd7634..c5af51b7dd7e 100644
> --- a/drivers/iio/accel/kxsd9-spi.c
> +++ b/drivers/iio/accel/kxsd9-spi.c
> @@ -3,75 +3,30 @@
> #include <linux/spi/spi.h>
> #include <linux/module.h>
> #include <linux/slab.h>
> +#include <linux/regmap.h>
>
> #include "kxsd9.h"
>
> -#define KXSD9_READ(a) (0x80 | (a))
> -#define KXSD9_WRITE(a) (a)
> -
> -static int kxsd9_spi_readreg(struct kxsd9_transport *tr, u8 address)
> -{
> - struct spi_device *spi = tr->trdev;
> -
> - return spi_w8r8(spi, KXSD9_READ(address));
> -}
> -
> -static int kxsd9_spi_writereg(struct kxsd9_transport *tr, u8 address, u8 val)
> -{
> - struct spi_device *spi = tr->trdev;
> -
> - tr->tx[0] = KXSD9_WRITE(address),
> - tr->tx[1] = val;
> - return spi_write(spi, tr->tx, 2);
> -}
> -
> -static int kxsd9_spi_readval(struct kxsd9_transport *tr, u8 address)
> -{
> - struct spi_device *spi = tr->trdev;
> - struct spi_transfer xfers[] = {
> - {
> - .bits_per_word = 8,
> - .len = 1,
> - .delay_usecs = 200,
> - .tx_buf = tr->tx,
> - }, {
> - .bits_per_word = 8,
> - .len = 2,
> - .rx_buf = tr->rx,
> - },
> - };
> - int ret;
> -
> - tr->tx[0] = KXSD9_READ(address);
> - ret = spi_sync_transfer(spi, xfers, ARRAY_SIZE(xfers));
> - if (!ret)
> - ret = (((u16)(tr->rx[0])) << 8) | (tr->rx[1]);
> - return ret;
> -}
> -
> static int kxsd9_spi_probe(struct spi_device *spi)
> {
> - struct kxsd9_transport *transport;
> - int ret;
> -
> - transport = devm_kzalloc(&spi->dev, sizeof(*transport), GFP_KERNEL);
> - if (!transport)
> - return -ENOMEM;
> + static const struct regmap_config config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = 0x0e,
> + };
> + struct regmap *regmap;
>
> - transport->trdev = spi;
> - transport->readreg = kxsd9_spi_readreg;
> - transport->writereg = kxsd9_spi_writereg;
> - transport->readval = kxsd9_spi_readval;
> spi->mode = SPI_MODE_0;
> - spi_setup(spi);
> -
> - ret = kxsd9_common_probe(&spi->dev,
> - transport,
> - spi_get_device_id(spi)->name);
> - if (ret)
> - return ret;
> -
> - return 0;
> + regmap = devm_regmap_init_spi(spi, &config);
> + if (IS_ERR(regmap)) {
> + dev_err(&spi->dev, "%s: regmap allocation failed: %ld\n",
> + __func__, PTR_ERR(regmap));
> + return PTR_ERR(regmap);
> + }
> +
> + return kxsd9_common_probe(&spi->dev,
> + regmap,
> + spi_get_device_id(spi)->name);
> }
>
> static int kxsd9_spi_remove(struct spi_device *spi)
> diff --git a/drivers/iio/accel/kxsd9.c b/drivers/iio/accel/kxsd9.c
> index a787ec236608..c065c6e09fa4 100644
> --- a/drivers/iio/accel/kxsd9.c
> +++ b/drivers/iio/accel/kxsd9.c
> @@ -21,7 +21,7 @@
> #include <linux/sysfs.h>
> #include <linux/slab.h>
> #include <linux/module.h>
> -
> +#include <linux/regmap.h>
> #include <linux/iio/iio.h>
> #include <linux/iio/sysfs.h>
>
> @@ -46,7 +46,7 @@
> * @us: spi device
> **/
> struct kxsd9_state {
> - struct kxsd9_transport *transport;
> + struct regmap *map;
> struct mutex buf_lock;
> };
>
> @@ -63,6 +63,7 @@ static int kxsd9_write_scale(struct iio_dev *indio_dev, int micro)
> int ret, i;
> struct kxsd9_state *st = iio_priv(indio_dev);
> bool foundit = false;
> + unsigned int val;
>
> for (i = 0; i < 4; i++)
> if (micro == kxsd9_micro_scales[i]) {
> @@ -73,13 +74,14 @@ static int kxsd9_write_scale(struct iio_dev *indio_dev, int micro)
> return -EINVAL;
>
> mutex_lock(&st->buf_lock);
> - ret = st->transport->readreg(st->transport,
> - KXSD9_REG_CTRL_C);
> + ret = regmap_read(st->map,
> + KXSD9_REG_CTRL_C,
> + &val);
> if (ret < 0)
> goto error_ret;
> - ret = st->transport->writereg(st->transport,
> - KXSD9_REG_CTRL_C,
> - (ret & ~KXSD9_FS_MASK) | i);
> + ret = regmap_write(st->map,
> + KXSD9_REG_CTRL_C,
> + (val & ~KXSD9_FS_MASK) | i);
> error_ret:
> mutex_unlock(&st->buf_lock);
> return ret;
> @@ -89,11 +91,15 @@ static int kxsd9_read(struct iio_dev *indio_dev, u8 address)
> {
> int ret;
> struct kxsd9_state *st = iio_priv(indio_dev);
> + __be16 raw_val;
>
> mutex_lock(&st->buf_lock);
> - ret = st->transport->readval(st->transport, address);
> + ret = regmap_bulk_read(st->map, address, &raw_val, sizeof(raw_val));
> + if (ret)
> + goto out_fail_read;
> /* Only 12 bits are valid */
> - ret &= 0xfff0;
> + ret = be16_to_cpu(raw_val) & 0xfff0;
> +out_fail_read:
> mutex_unlock(&st->buf_lock);
> return ret;
> }
> @@ -133,6 +139,7 @@ static int kxsd9_read_raw(struct iio_dev *indio_dev,
> {
> int ret = -EINVAL;
> struct kxsd9_state *st = iio_priv(indio_dev);
> + unsigned int regval;
>
> switch (mask) {
> case IIO_CHAN_INFO_RAW:
> @@ -143,12 +150,13 @@ static int kxsd9_read_raw(struct iio_dev *indio_dev,
> ret = IIO_VAL_INT;
> break;
> case IIO_CHAN_INFO_SCALE:
> - ret = st->transport->readreg(st->transport,
> - KXSD9_REG_CTRL_C);
> + ret = regmap_read(st->map,
> + KXSD9_REG_CTRL_C,
> + ®val);
> if (ret < 0)
> goto error_ret;
> *val = 0;
> - *val2 = kxsd9_micro_scales[ret & KXSD9_FS_MASK];
> + *val2 = kxsd9_micro_scales[regval & KXSD9_FS_MASK];
> ret = IIO_VAL_INT_PLUS_MICRO;
> break;
> }
> @@ -184,10 +192,10 @@ static int kxsd9_power_up(struct kxsd9_state *st)
> {
> int ret;
>
> - ret = st->transport->writereg(st->transport, KXSD9_REG_CTRL_B, 0x40);
> + ret = regmap_write(st->map, KXSD9_REG_CTRL_B, 0x40);
> if (ret)
> return ret;
> - return st->transport->writereg(st->transport, KXSD9_REG_CTRL_C, 0x9b);
> + return regmap_write(st->map, KXSD9_REG_CTRL_C, 0x9b);
> };
>
> static const struct iio_info kxsd9_info = {
> @@ -198,7 +206,7 @@ static const struct iio_info kxsd9_info = {
> };
>
> int kxsd9_common_probe(struct device *parent,
> - struct kxsd9_transport *transport,
> + struct regmap *map,
> const char *name)
> {
> struct iio_dev *indio_dev;
> @@ -210,7 +218,7 @@ int kxsd9_common_probe(struct device *parent,
> return -ENOMEM;
>
> st = iio_priv(indio_dev);
> - st->transport = transport;
> + st->map = map;
>
> mutex_init(&st->buf_lock);
> indio_dev->channels = kxsd9_channels;
> diff --git a/drivers/iio/accel/kxsd9.h b/drivers/iio/accel/kxsd9.h
> index b6328e88b56f..19131a7a692c 100644
> --- a/drivers/iio/accel/kxsd9.h
> +++ b/drivers/iio/accel/kxsd9.h
> @@ -4,27 +4,7 @@
> #define KXSD9_STATE_RX_SIZE 2
> #define KXSD9_STATE_TX_SIZE 2
>
> -struct kxsd9_transport;
> -
> -/**
> - * struct kxsd9_transport - transport adapter for SPI or I2C
> - * @trdev: transport device such as SPI or I2C
> - * @readreg(): function to read a byte from an address in the device
> - * @writereg(): function to write a byte to an address in the device
> - * @readval(): function to read a 16bit value from the device
> - * @rx: cache aligned read buffer
> - * @tx: cache aligned write buffer
> - */
> -struct kxsd9_transport {
> - void *trdev;
> - int (*readreg) (struct kxsd9_transport *tr, u8 address);
> - int (*writereg) (struct kxsd9_transport *tr, u8 address, u8 val);
> - int (*readval) (struct kxsd9_transport *tr, u8 address);
> - u8 rx[KXSD9_STATE_RX_SIZE] ____cacheline_aligned;
> - u8 tx[KXSD9_STATE_TX_SIZE];
> -};
> -
> int kxsd9_common_probe(struct device *parent,
> - struct kxsd9_transport *transport,
> + struct regmap *map,
> const char *name);
> int kxsd9_common_remove(struct device *parent);
>
next prev parent reply other threads:[~2016-09-18 10:28 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-01 9:44 [PATCH 01/15 v2] iio: accel: kxsd9: Fix scaling bug Linus Walleij
2016-09-01 9:44 ` [PATCH 02/15 v2] iio: accel: kxsd9: Split out transport mechanism Linus Walleij
2016-09-03 17:37 ` Jonathan Cameron
2016-09-03 19:29 ` Jonathan Cameron
2016-09-04 20:46 ` Linus Walleij
2016-09-18 10:06 ` Jonathan Cameron
2016-09-01 9:44 ` [PATCH 03/15 v2] iio: accel: kxsd9: split out a common remove() function Linus Walleij
2016-09-03 17:38 ` Jonathan Cameron
2016-09-03 19:29 ` Jonathan Cameron
2016-09-18 10:08 ` Jonathan Cameron
2016-09-04 16:33 ` Jonathan Cameron
2016-09-01 9:44 ` [PATCH 04/15 v2] iio: accel: kxsd9: Split out SPI transport Linus Walleij
2016-09-03 19:24 ` Jonathan Cameron
2016-09-03 19:29 ` Jonathan Cameron
2016-09-18 10:09 ` Jonathan Cameron
2016-09-04 16:33 ` Jonathan Cameron
2016-09-01 9:44 ` [PATCH 05/15 v2] iio: accel: kxsd9: Do away with the write2 helper Linus Walleij
2016-09-03 19:25 ` Jonathan Cameron
2016-09-03 19:30 ` Jonathan Cameron
2016-09-18 10:27 ` Jonathan Cameron
2016-09-01 9:44 ` [PATCH 06/15 v2] iio: accel: kxsd9: Convert to use regmap for transport Linus Walleij
2016-09-18 10:28 ` Jonathan Cameron [this message]
2016-09-01 9:44 ` [PATCH 07/15 v2] iio: accel: kxsd9: Add I2C transport Linus Walleij
2016-09-18 10:29 ` Jonathan Cameron
2016-09-01 9:44 ` [PATCH 08/15 v2] iio: accel: kxsd9: Drop the buffer lock Linus Walleij
2016-09-01 9:44 ` [PATCH 09/15 v2] iio: accel: kxsd9: Fix up offset and scaling Linus Walleij
2016-09-18 10:31 ` Jonathan Cameron
2016-09-01 9:44 ` [PATCH 10/15 v2] iio: accel: kxsd9: Add triggered buffer handling Linus Walleij
2016-09-04 16:40 ` Jonathan Cameron
2016-09-18 10:32 ` Jonathan Cameron
2016-09-01 9:44 ` [PATCH 11/15 v2] iio: accel: kxsd9: Deploy proper register bit defines Linus Walleij
2016-09-04 16:42 ` Jonathan Cameron
2016-09-18 10:33 ` Jonathan Cameron
2016-09-01 9:44 ` [PATCH 12/15 v2] iio: accel: kxsd9: Fetch and handle regulators Linus Walleij
2016-09-04 16:43 ` Jonathan Cameron
2016-09-18 10:35 ` Jonathan Cameron
2016-09-01 9:44 ` [PATCH 13/15 v2] iio: accel: kxsd9: Replace "parent" with "dev" Linus Walleij
2016-09-04 16:46 ` Jonathan Cameron
2016-09-18 10:35 ` Jonathan Cameron
2016-09-01 9:44 ` [PATCH 14/15 v2] iio: accel: kxsd9: Deploy system and runtime PM Linus Walleij
2016-09-04 16:48 ` Jonathan Cameron
2016-09-18 10:36 ` Jonathan Cameron
2016-09-01 9:44 ` [PATCH 15/15 v2] iio: accel: kxsd9: Support reading a mounting matrix Linus Walleij
2016-09-04 16:51 ` Jonathan Cameron
2016-09-18 10:36 ` Jonathan Cameron
2016-09-03 17:31 ` [PATCH 01/15 v2] iio: accel: kxsd9: Fix scaling bug Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=532fd859-b013-4e17-e20e-c134beebb54f@kernel.org \
--to=jic23@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).