Re: [PATCH] iio: mma8452: Use correct acceleration units.

[Jonathan Cameron <jic23@kernel.org>]

On 12/07/14 11:50, Hartmut Knaack wrote:
> Martin Fuzzey schrieb:
>> The userspace interface for acceleration sensors is documented as using
>> m/s^2 units [Documentation/ABI/testing/sysfs-bus-iio]
>>
>> The fullscale raw value for the mma8452 (-2048) corresponds to -2G, -4G or -8G
>> depending on the seleted mode.
>>
>> The scale table was converting to G rather than m/s^2.
>> Change the scaling table to match the documented interface.
>>
>> Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
Fixed up and applied to the fixes-togreg branch of iio.git.
Also marked for stable.

Thanks,

J
>> ---
>>   drivers/iio/accel/mma8452.c |    7 ++++++-
>>   1 file changed, 6 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
>> index 17aeea1..61eba5a 100644
>> --- a/drivers/iio/accel/mma8452.c
>> +++ b/drivers/iio/accel/mma8452.c
>> @@ -111,8 +111,13 @@ static const int mma8452_samp_freq[8][2] = {
>>   	{6, 250000}, {1, 560000}
>>   };
>>
> The first line of the comment should just contain /*
>> +/* Hardware has fullscale of -2G, -4G, -8G corresponding to raw value -2048
>> + * The userspace interface uses m/s^2 and we declare micro units
>> + * So scale factor is given by:
>> + * 	g * N * 1000000 / 2048 for N = 2, 4, 8 and g=9.80665
>> + */
>>   static const int mma8452_scales[3][2] = {
>> -	{0, 977}, {0, 1953}, {0, 3906}
>> +	{0, 9577}, {0, 19154}, {0, 38307}
>>   };
>>
>>   static ssize_t mma8452_show_samp_freq_avail(struct device *dev,
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
>