From: Jonathan Cameron <jic23@kernel.org>
To: Josef Gajdusek <atx@atalax.net>, linux-iio@vger.kernel.org
Cc: devel@driverdev.osuosl.org, gregkh@linuxfoundation.org,
linux-kernel@vger.kernel.org, pmeerw@pmeerw.net,
dan.carpenter@oracle.com, lars@metafoo.de
Subject: Re: [PATCH v5 (staging-next) 4/5] staging:iio:hmc5843: Add support for i2c hmc5983
Date: Wed, 23 Jul 2014 21:51:30 +0100 [thread overview]
Message-ID: <53D02052.4050801@kernel.org> (raw)
In-Reply-To: <20140722150250.GE7845@dashie>
On 22/07/14 16:02, Josef Gajdusek wrote:
> This patch adds support for the hmc5983 i2c interface.
> This chip is almost identical to the hmc5883. The difference being added
> temperature compensation, additional available sample rate (220Hz) and an SPI
> interface.
>
> Signed-off-by: Josef Gajdusek <atx@atx.name>
Applied to the togreg branch of iio.git - initially pushed out as testing.
> ---
> .../devicetree/bindings/iio/magnetometer/hmc5843.txt | 1 +
> drivers/staging/iio/magnetometer/Kconfig | 2 +-
> drivers/staging/iio/magnetometer/hmc5843.h | 1 +
> drivers/staging/iio/magnetometer/hmc5843_core.c | 20 +++++++++++++++++---
> drivers/staging/iio/magnetometer/hmc5843_i2c.c | 6 ++++--
> 5 files changed, 24 insertions(+), 6 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt b/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt
> index b8cbdd5..8e191ee 100644
> --- a/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt
> +++ b/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt
> @@ -6,6 +6,7 @@ Required properties:
> Other models which are supported with driver are:
> "honeywell,hmc5883"
> "honeywell,hmc5883l"
> + "honeywell,hmc5983"
> - reg : the I2C address of the magnetometer - typically 0x1e
>
> Optional properties:
> diff --git a/drivers/staging/iio/magnetometer/Kconfig b/drivers/staging/iio/magnetometer/Kconfig
> index 0a27f98..c086f33 100644
> --- a/drivers/staging/iio/magnetometer/Kconfig
> +++ b/drivers/staging/iio/magnetometer/Kconfig
> @@ -20,6 +20,6 @@ config SENSORS_HMC5843_I2C
> This driver can also be compiled as a set of modules.
> If so, these modules will be created:
> - hmc5843_core (core functions)
> - - hmc5843_i2c (support for HMC5843, HMC5883 and HMC5883L)
> + - hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983)
>
> endmenu
> diff --git a/drivers/staging/iio/magnetometer/hmc5843.h b/drivers/staging/iio/magnetometer/hmc5843.h
> index 06b2712..b784e3e 100644
> --- a/drivers/staging/iio/magnetometer/hmc5843.h
> +++ b/drivers/staging/iio/magnetometer/hmc5843.h
> @@ -29,6 +29,7 @@ enum hmc5843_ids {
> HMC5843_ID,
> HMC5883_ID,
> HMC5883L_ID,
> + HMC5983_ID,
> };
>
> struct hmc5843_data {
> diff --git a/drivers/staging/iio/magnetometer/hmc5843_core.c b/drivers/staging/iio/magnetometer/hmc5843_core.c
> index 08fb0be..914ae1a 100644
> --- a/drivers/staging/iio/magnetometer/hmc5843_core.c
> +++ b/drivers/staging/iio/magnetometer/hmc5843_core.c
> @@ -101,6 +101,11 @@ static const int hmc5883_regval_to_samp_freq[][2] = {
> {75, 0}
> };
>
> +static const int hmc5983_regval_to_samp_freq[][2] = {
> + {0, 750000}, {1, 500000}, {3, 0}, {7, 500000}, {15, 0}, {30, 0},
> + {75, 0}, {220, 0}
> +};
> +
> /* Describe chip variants */
> struct hmc5843_chip_info {
> const struct iio_chan_spec *channels;
> @@ -457,7 +462,7 @@ static const struct iio_chan_spec hmc5843_channels[] = {
> IIO_CHAN_SOFT_TIMESTAMP(3),
> };
>
> -/* Beware: Y and Z are exchanged on HMC5883 */
> +/* Beware: Y and Z are exchanged on HMC5883 and 5983 */
> static const struct iio_chan_spec hmc5883_channels[] = {
> HMC5843_CHANNEL(X, 0),
> HMC5843_CHANNEL(Z, 1),
> @@ -504,6 +509,15 @@ static const struct hmc5843_chip_info hmc5843_chip_info_tbl[] = {
> .n_regval_to_nanoscale =
> ARRAY_SIZE(hmc5883l_regval_to_nanoscale),
> },
> + [HMC5983_ID] = {
> + .channels = hmc5883_channels,
> + .regval_to_samp_freq = hmc5983_regval_to_samp_freq,
> + .n_regval_to_samp_freq =
> + ARRAY_SIZE(hmc5983_regval_to_samp_freq),
> + .regval_to_nanoscale = hmc5883l_regval_to_nanoscale,
> + .n_regval_to_nanoscale =
> + ARRAY_SIZE(hmc5883l_regval_to_nanoscale),
> + }
> };
>
> static int hmc5843_init(struct hmc5843_data *data)
> @@ -516,7 +530,7 @@ static int hmc5843_init(struct hmc5843_data *data)
> if (ret < 0)
> return ret;
> if (id[0] != 'H' || id[1] != '4' || id[2] != '3') {
> - dev_err(data->dev, "no HMC5843/5883/5883L sensor\n");
> + dev_err(data->dev, "no HMC5843/5883/5883L/5983 sensor\n");
> return -ENODEV;
> }
>
> @@ -620,5 +634,5 @@ int hmc5843_common_remove(struct device *dev)
> EXPORT_SYMBOL(hmc5843_common_remove);
>
> MODULE_AUTHOR("Shubhrajyoti Datta <shubhrajyoti@ti.com>");
> -MODULE_DESCRIPTION("HMC5843/5883/5883L core driver");
> +MODULE_DESCRIPTION("HMC5843/5883/5883L/5983 core driver");
> MODULE_LICENSE("GPL");
> diff --git a/drivers/staging/iio/magnetometer/hmc5843_i2c.c b/drivers/staging/iio/magnetometer/hmc5843_i2c.c
> index 5593a7d..6acd614 100644
> --- a/drivers/staging/iio/magnetometer/hmc5843_i2c.c
> +++ b/drivers/staging/iio/magnetometer/hmc5843_i2c.c
> @@ -1,5 +1,5 @@
> /*
> - * i2c driver for hmc5843/5843/5883/5883l
> + * i2c driver for hmc5843/5843/5883/5883l/5983
> *
> * Split from hmc5843.c
> * Copyright (C) Josef Gajdusek <atx@atx.name>
> @@ -73,6 +73,7 @@ static const struct i2c_device_id hmc5843_id[] = {
> { "hmc5843", HMC5843_ID },
> { "hmc5883", HMC5883_ID },
> { "hmc5883l", HMC5883L_ID },
> + { "hmc5983", HMC5983_ID },
> { }
> };
> MODULE_DEVICE_TABLE(i2c, hmc5843_id);
> @@ -81,6 +82,7 @@ static const struct of_device_id hmc5843_of_match[] = {
> { .compatible = "honeywell,hmc5843", .data = (void *)HMC5843_ID },
> { .compatible = "honeywell,hmc5883", .data = (void *)HMC5883_ID },
> { .compatible = "honeywell,hmc5883l", .data = (void *)HMC5883L_ID },
> + { .compatible = "honeywell,hmc5983", .data = (void *)HMC5983_ID },
> {}
> };
> MODULE_DEVICE_TABLE(of, hmc5843_of_match);
> @@ -98,5 +100,5 @@ static struct i2c_driver hmc5843_driver = {
> module_i2c_driver(hmc5843_driver);
>
> MODULE_AUTHOR("Josef Gajdusek <atx@atx.name>");
> -MODULE_DESCRIPTION("HMC5843/5883/5883L i2c driver");
> +MODULE_DESCRIPTION("HMC5843/5883/5883L/5983 i2c driver");
> MODULE_LICENSE("GPL");
>
next prev parent reply other threads:[~2014-07-23 20:49 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-22 15:00 [PATCH v5 (staging-next) 0/5] staging:iio:hmc5843: Few adjustments and support for hmc5983 Josef Gajdusek
2014-07-22 15:00 ` [PATCH v5 (staging-next) 1/5] staging:iio:hmc5843: Added regmap support Josef Gajdusek
2014-07-23 20:50 ` Jonathan Cameron
2014-07-22 15:01 ` [PATCH v5 (staging-next) 2/5] staging:iio:hmc5843: Split hmc5843.c to multiple files Josef Gajdusek
2014-07-23 20:50 ` Jonathan Cameron
2014-07-22 15:02 ` [PATCH v5 (staging-next) 3/5] staging:iio:hmc5843: register <-> value arrays now can have different lengths Josef Gajdusek
2014-07-23 20:51 ` Jonathan Cameron
2014-07-22 15:02 ` [PATCH v5 (staging-next) 4/5] staging:iio:hmc5843: Add support for i2c hmc5983 Josef Gajdusek
2014-07-23 20:51 ` Jonathan Cameron [this message]
2014-07-22 15:03 ` [PATCH v5 (staging-next) 5/5] staging:iio:hmc5843: Add support for spi hmc5983 Josef Gajdusek
2014-07-23 20:51 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53D02052.4050801@kernel.org \
--to=jic23@kernel.org \
--cc=atx@atalax.net \
--cc=dan.carpenter@oracle.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).