From: Jonathan Cameron <jic23@kernel.org>
To: Daniel Baluta <daniel.baluta@intel.com>
Cc: linux-iio@vger.kernel.org,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
irina.tirdea@intel.com
Subject: Re: [RFC PATCH 3/8] iio: core: Introduce new MOTION event
Date: Thu, 09 Oct 2014 20:37:05 +0100 [thread overview]
Message-ID: <5436E3E1.3050306@kernel.org> (raw)
In-Reply-To: <CAEnQRZDP84sdnO4mnS2CtCdy7WzBMhMfuNrMM=rkR0ty7b-1Rw@mail.gmail.com>
On 07/10/14 11:48, Daniel Baluta wrote:
> On Sat, Oct 4, 2014 at 4:12 PM, Jonathan Cameron <jic23@kernel.org> wrote:
>> On 02/10/14 14:43, Daniel Baluta wrote:
>>> This is to be used by drivers to signal detection of motion. We also
>>> add some possible values for motion as IIO events modifiers:
>>> * running
>>> * jogging
>>> * walking
>>> * still
>>>
>>> These values are supported by Frescale's MMA9553 sensor:
>>>
>>> http://freescale.com/files/sensors/doc/ref_manual/MMA9553LSWRM.pdf
>>>
>>> Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
>>> Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
>> Hmm.. This is the interesting one.
>> Not immediately obvious how best to represent this stuff.
>>> ---
>>> Documentation/ABI/testing/sysfs-bus-iio | 7 +++++++
>>> drivers/iio/industrialio-core.c | 4 ++++
>>> drivers/iio/industrialio-event.c | 1 +
>>> include/linux/iio/types.h | 7 ++++++-
>>> 4 files changed, 18 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
>>> index d760b02..070346d 100644
>>> --- a/Documentation/ABI/testing/sysfs-bus-iio
>>> +++ b/Documentation/ABI/testing/sysfs-bus-iio
>>> @@ -808,6 +808,13 @@ Description:
>>> number or direction is not specified, applies to all channels of
>>> this type.
>>>
>>> +What: /sys/.../events/in_activity_motion_either_en
>>> +KernelVersion: 3.17
>>> +Contact: linux-iio@vger.kernel.org
>>> +Description:
>>> + Enables or disables motion detection. Each time motion is detected an
>>> + event of this type will be generated.
>>> +
>> The either bit seems a bit random but I can see there is no particularly obvious
>> alternative.
>>
>> We really need a clean way of representing a multilevel 'state change' like this.
>>
>> Looking at the event code, I almost wonder if we would be better using the
>> direction element for running, walking etc rather than a modifier.
>>
>> Having said that we will probably also get devices where this is polled rather than
>> event. 'What activity is currently going on?'
>> If we take that view modifiers make sense as it becomes
>> 'Is the user running?' Perhaps even offering a confidence interval, e.g units as
>> percentage
>> in_activity_running_input 0..100
>> in_activity_walking_input 0..100
>> etc
>>
>
> This is clear.
>
>> Then our event becomes a state change event (yup we'll need to add that)
>
> So this means we will have a single event type named "state_change"?
> Or better "transition".
I was being rather incoherent here. I think we are mostly covered
simple rising type events for the confidence interval measurements for
each of the activity_running, activity_walking etc 'modified channels'
we have above.
Don't need a state change. If we actually have a device that interrupts on
simply the event has change, then the event handling will need to check what
the new state is and fire the relevant event.
>
>>
>> /events/in_activity_walking_rising_en will then cause events when the percentage
>> confidence on a state rises above the provided threshold or goes above it
>> (default of 50% perhaps on devices which only report one state).
>
> Then here the attribute name will be:
> /events/in_activity_state_change_walking_rising_en
>
> or if we call the event type "transition" this will be:
> /events/in_activity_transition_walking_rising_en
>
> I am a little bit confused :).
I confused myself as well.
we should end up with
/events/in_activity_walking_rising_en
/events/in_activity_running_rising_en
/events/in_activity_hopping_rising_en
(I'll stop there before things get silly)
Each of which claims to based on the confidence level of that state, even if that
only ever takes values of 0 and 100%
>
>>
>> /events/in_activity_walking_falling_en will do the leaving case.
>>
>> Note these are just some quick initial thoughts on alternative methods.
>> I'll want to think on this more and get responses from more interested
>> parties!
>>
>>> What: /sys/bus/iio/devices/iio:deviceX/trigger/current_trigger
>>> KernelVersion: 2.6.35
>>> Contact: linux-iio@vger.kernel.org
>>> diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
>>> index 67e8561..e453ef9 100644
>>> --- a/drivers/iio/industrialio-core.c
>>> +++ b/drivers/iio/industrialio-core.c
>>> @@ -92,6 +92,10 @@ static const char * const iio_modifier_names[] = {
>>> [IIO_MOD_NORTH_TRUE] = "from_north_true",
>>> [IIO_MOD_NORTH_MAGN_TILT_COMP] = "from_north_magnetic_tilt_comp",
>>> [IIO_MOD_NORTH_TRUE_TILT_COMP] = "from_north_true_tilt_comp",
>>> + [IIO_MOD_RUNNING] = "running",
>>> + [IIO_MOD_JOGGING] = "jogging",
>>> + [IIO_MOD_WALKING] = "walking",
>>> + [IIO_MOD_STILL] = "still",
>>> };
>>>
>>> /* relies on pairs of these shared then separate */
>>> diff --git a/drivers/iio/industrialio-event.c b/drivers/iio/industrialio-event.c
>>> index 0c1e37e..eca5af2 100644
>>> --- a/drivers/iio/industrialio-event.c
>>> +++ b/drivers/iio/industrialio-event.c
>>> @@ -197,6 +197,7 @@ static const char * const iio_ev_type_text[] = {
>>> [IIO_EV_TYPE_ROC] = "roc",
>>> [IIO_EV_TYPE_THRESH_ADAPTIVE] = "thresh_adaptive",
>>> [IIO_EV_TYPE_MAG_ADAPTIVE] = "mag_adaptive",
>>> + [IIO_EV_TYPE_MOTION] = "motion",
>>> };
>>>
>>> static const char * const iio_ev_dir_text[] = {
>>> diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h
>>> index d58769a..003638d 100644
>>> --- a/include/linux/iio/types.h
>>> +++ b/include/linux/iio/types.h
>>> @@ -60,7 +60,11 @@ enum iio_modifier {
>>> IIO_MOD_NORTH_MAGN,
>>> IIO_MOD_NORTH_TRUE,
>>> IIO_MOD_NORTH_MAGN_TILT_COMP,
>>> - IIO_MOD_NORTH_TRUE_TILT_COMP
>>> + IIO_MOD_NORTH_TRUE_TILT_COMP,
>>> + IIO_MOD_RUNNING,
>>> + IIO_MOD_JOGGING,
>>> + IIO_MOD_WALKING,
>>> + IIO_MOD_STILL,
>>> };
>>>
>>> enum iio_event_type {
>>> @@ -69,6 +73,7 @@ enum iio_event_type {
>>> IIO_EV_TYPE_ROC,
>>> IIO_EV_TYPE_THRESH_ADAPTIVE,
>>> IIO_EV_TYPE_MAG_ADAPTIVE,
>>> + IIO_EV_TYPE_MOTION,
>>> };
>>>
>>> enum iio_event_info {
>>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-10-10 23:46 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-02 13:43 [RFC PATCH] iio: Introduce activity channel Daniel Baluta
2014-10-02 13:43 ` [RFC PATCH 1/8] iio: dummy: Introduce virtual registers for dummy device Daniel Baluta
2014-10-04 12:48 ` Jonathan Cameron
2014-10-06 11:17 ` Daniel Baluta
2014-10-09 19:28 ` Jonathan Cameron
2014-10-19 20:30 ` Hartmut Knaack
2014-10-19 20:39 ` Daniel Baluta
2014-10-02 13:43 ` [RFC PATCH 2/8] iio: core: Introduce IIO_ACTIVITY channel Daniel Baluta
2014-10-04 13:00 ` Jonathan Cameron
2014-10-02 13:43 ` [RFC PATCH 3/8] iio: core: Introduce new MOTION event Daniel Baluta
2014-10-04 13:12 ` Jonathan Cameron
2014-10-06 14:17 ` Daniel Baluta
2014-10-09 19:31 ` Jonathan Cameron
2014-10-11 9:47 ` Daniel Baluta
2014-10-13 9:46 ` Karol Wrona
2014-10-07 10:48 ` Daniel Baluta
2014-10-09 19:37 ` Jonathan Cameron [this message]
2014-10-02 13:43 ` [RFC PATCH 4/8] iio: core: Introduce pedometer STEP counter modifier Daniel Baluta
2014-10-04 12:53 ` Jonathan Cameron
2014-10-06 13:50 ` Tirdea, Irina
2014-10-06 16:31 ` Jonathan Cameron
2014-10-07 13:54 ` Tirdea, Irina
2014-10-02 13:43 ` [RFC PATCH 5/8] iio: core: Introduce ENABLE channel info mask Daniel Baluta
2014-10-02 13:43 ` [RFC PATCH 6/8] iio: core: Introduce new STEP_DETECT event Daniel Baluta
2014-10-04 12:56 ` Jonathan Cameron
2014-10-02 13:43 ` [RFC PATCH 7/8] iio: dummy: Demonstrate the usage of activity channel Daniel Baluta
2014-10-02 13:43 ` [RFC PATCH 8/8] iio: event_monitor: Add support for " Daniel Baluta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5436E3E1.3050306@kernel.org \
--to=jic23@kernel.org \
--cc=daniel.baluta@intel.com \
--cc=irina.tirdea@intel.com \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox